usb: musb: split davinci to its own platform_driver

Just adding its own platform_driver, not really
using it yet.

When all HW glue layers are converted, more patches
will come to split power management code from musb_core
and move it completely to HW glue layer.
Signed-off-by: NFelipe Balbi <balbi@ti.com>

arch/arm/mach-davinci/usb.c

@@ -76,7 +76,7 @@ static struct resource usb_resources[] = {
 static u64 usb_dmamask = DMA_BIT_MASK(32);
 
 static struct platform_device usb_dev = {
-	.name           = "musb-hdrc",
+	.name           = "musb-davinci",
 	.id             = -1,
 	.dev = {
 		.platform_data		= &usb_data,

drivers/usb/musb/Makefile

@@ -14,13 +14,13 @@ musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
 
 # Hardware Glue Layer
 
-musb_hdrc-$(CONFIG_USB_MUSB_DAVINCI)		+= davinci.o
 musb_hdrc-$(CONFIG_USB_MUSB_DA8XX)		+= da8xx.o
 musb_hdrc-$(CONFIG_USB_MUSB_BLACKFIN)		+= blackfin.o
 
 obj-$(CONFIG_USB_MUSB_OMAP2PLUS)		+= omap2430.o
 obj-$(CONFIG_USB_MUSB_AM35X)			+= am35x.o
 obj-$(CONFIG_USB_MUSB_TUSB6010)			+= tusb6010.o
+obj-$(CONFIG_USB_MUSB_DAVINCI)			+= davinci.o
 
 # the kconfig must guarantee that only one of the
 # possible I/O schemes will be enabled at a time ...

drivers/usb/musb/davinci.c

@@ -30,6 +30,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <mach/hardware.h>
 #include <mach/memory.h>
@@ -514,3 +516,85 @@ const struct musb_platform_ops musb_ops = {
 
 	.set_vbus	= davinci_musb_set_vbus,
 };
+
+static u64 davinci_dmamask = DMA_BIT_MASK(32);
+
+static int __init davinci_probe(struct platform_device *pdev)
+{
+	struct musb_hdrc_platform_data	*pdata = pdev->dev.platform_data;
+	struct platform_device		*musb;
+
+	int				ret = -ENOMEM;
+
+	musb = platform_device_alloc("musb-hdrc", -1);
+	if (!musb) {
+		dev_err(&pdev->dev, "failed to allocate musb device\n");
+		goto err0;
+	}
+
+	musb->dev.parent		= &pdev->dev;
+	musb->dev.dma_mask		= &davinci_dmamask;
+	musb->dev.coherent_dma_mask	= davinci_dmamask;
+
+	platform_set_drvdata(pdev, musb);
+
+	ret = platform_device_add_resources(musb, pdev->resource,
+			pdev->num_resources);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add resources\n");
+		goto err1;
+	}
+
+	ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to add platform_data\n");
+		goto err1;
+	}
+
+	ret = platform_device_add(musb);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register musb device\n");
+		goto err1;
+	}
+
+	return 0;
+
+err1:
+	platform_device_put(musb);
+
+err0:
+	return ret;
+}
+
+static int __exit davinci_remove(struct platform_device *pdev)
+{
+	struct platform_device		*musb = platform_get_drvdata(pdev);
+
+	platform_device_del(musb);
+	platform_device_put(musb);
+
+	return 0;
+}
+
+static struct platform_driver davinci_driver = {
+	.remove		= __exit_p(davinci_remove),
+	.driver		= {
+		.name	= "musb-davinci",
+	},
+};
+
+MODULE_DESCRIPTION("DaVinci MUSB Glue Layer");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");
+
+static int __init davinci_init(void)
+{
+	return platform_driver_probe(&davinci_driver, davinci_probe);
+}
+subsys_initcall(davinci_init);
+
+static void __exit davinci_exit(void)
+{
+	platform_driver_unregister(&davinci_driver);
+}
+module_exit(davinci_exit);