Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 733596be 编写于 作者: J Jeff Kirsher 提交者： Jeff Garzik
浏览文件
操作

igb: cleanup function header comments 

Function header comments do not match function name.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
上级 3b644cf6
隐藏空白更改
内联 并排
Showing with 103 addition and 103 deletion
drivers/net/igb/e1000_82575.c
浏览文件 @ 733596be
......@@ -226,7 +226,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
}
/**
* e1000_acquire_phy_82575 - Acquire rights to access PHY
* igb_acquire_phy_82575 - Acquire rights to access PHY
* @hw: pointer to the HW structure
*
* Acquire access rights to the correct PHY. This is a
......@@ -242,7 +242,7 @@ static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
}
/**
* e1000_release_phy_82575 - Release rights to access PHY
* igb_release_phy_82575 - Release rights to access PHY
* @hw: pointer to the HW structure
*
* A wrapper to release access rights to the correct PHY. This is a
......@@ -257,7 +257,7 @@ static void igb_release_phy_82575(struct e1000_hw *hw)
}
/**
* e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
* igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
......@@ -310,7 +310,7 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
}
/**
* e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
* igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
......@@ -365,7 +365,7 @@ static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
}
/**
* e1000_get_phy_id_82575 - Retreive PHY addr and id
* igb_get_phy_id_82575 - Retrieve PHY addr and id
* @hw: pointer to the HW structure
*
* Retreives the PHY address and ID for both PHY's which do and do not use
......@@ -426,7 +426,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
}
/**
* e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset
* igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
* @hw: pointer to the HW structure
*
* Resets the PHY using the serial gigabit media independent interface.
......@@ -457,7 +457,7 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
}
/**
* e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
* igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure
* @active: true to enable LPLU, false to disable
*
......@@ -543,7 +543,7 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
}
/**
* e1000_acquire_nvm_82575 - Request for access to EEPROM
* igb_acquire_nvm_82575 - Request for access to EEPROM
* @hw: pointer to the HW structure
*
* Acquire the necessary semaphores for exclussive access to the EEPROM.
......@@ -569,7 +569,7 @@ static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
}
/**
* e1000_release_nvm_82575 - Release exclusive access to EEPROM
* igb_release_nvm_82575 - Release exclusive access to EEPROM
* @hw: pointer to the HW structure
*
* Stop any current commands to the EEPROM and clear the EEPROM request bit,
......@@ -582,7 +582,7 @@ static void igb_release_nvm_82575(struct e1000_hw *hw)
}
/**
* e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
* igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
......@@ -632,7 +632,7 @@ static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
}
/**
* e1000_release_swfw_sync_82575 - Release SW/FW semaphore
* igb_release_swfw_sync_82575 - Release SW/FW semaphore
* @hw: pointer to the HW structure
* @mask: specifies which semaphore to acquire
*
......@@ -654,7 +654,7 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
}
/**
* e1000_get_cfg_done_82575 - Read config done bit
* igb_get_cfg_done_82575 - Read config done bit
* @hw: pointer to the HW structure
*
* Read the management control register for the config done bit for
......@@ -690,7 +690,7 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
}
/**
* e1000_check_for_link_82575 - Check for link
* igb_check_for_link_82575 - Check for link
* @hw: pointer to the HW structure
*
* If sgmii is enabled, then use the pcs register to determine link, otherwise
......@@ -713,7 +713,7 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw)
}
/**
* e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
* igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
* @hw: pointer to the HW structure
* @speed: stores the current speed
* @duplex: stores the current duplex
......@@ -768,7 +768,7 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
}
/**
* e1000_rar_set_82575 - Set receive address register
* igb_rar_set_82575 - Set receive address register
* @hw: pointer to the HW structure
* @addr: pointer to the receive address
* @index: receive address array register
......@@ -785,7 +785,7 @@ static void igb_rar_set_82575(struct e1000_hw *hw, u8 *addr, u32 index)
}
/**
* e1000_reset_hw_82575 - Reset hardware
* igb_reset_hw_82575 - Reset hardware
* @hw: pointer to the HW structure
*
* This resets the hardware into a known state. This is a
......@@ -842,7 +842,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw)
}
/**
* e1000_init_hw_82575 - Initialize hardware
* igb_init_hw_82575 - Initialize hardware
* @hw: pointer to the HW structure
*
* This inits the hardware readying it for operation.
......@@ -886,7 +886,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw)
}
/**
* e1000_setup_copper_link_82575 - Configure copper link settings
* igb_setup_copper_link_82575 - Configure copper link settings
* @hw: pointer to the HW structure
*
* Configures the link for auto-neg or forced speed and duplex. Then we check
......@@ -974,7 +974,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
}
/**
* e1000_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes
* igb_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes
* @hw: pointer to the HW structure
*
* Configures speed and duplex for fiber and serdes links.
......@@ -1038,7 +1038,7 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw)
}
/**
* e1000_configure_pcs_link_82575 - Configure PCS link
* igb_configure_pcs_link_82575 - Configure PCS link
* @hw: pointer to the HW structure
*
* Configure the physical coding sub-layer (PCS) link. The PCS link is
......@@ -1103,7 +1103,7 @@ static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw)
}
/**
* e1000_sgmii_active_82575 - Return sgmii state
* igb_sgmii_active_82575 - Return sgmii state
* @hw: pointer to the HW structure
*
* 82575 silicon has a serialized gigabit media independent interface (sgmii)
......@@ -1129,7 +1129,7 @@ static bool igb_sgmii_active_82575(struct e1000_hw *hw)
}
/**
* e1000_reset_init_script_82575 - Inits HW defaults after reset
* igb_reset_init_script_82575 - Inits HW defaults after reset
* @hw: pointer to the HW structure
*
* Inits recommended HW defaults after a reset when there is no EEPROM
......@@ -1165,7 +1165,7 @@ static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
}
/**
* e1000_read_mac_addr_82575 - Read device MAC address
* igb_read_mac_addr_82575 - Read device MAC address
* @hw: pointer to the HW structure
**/
static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
......@@ -1179,7 +1179,7 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
}
/**
* e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters
* igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
* @hw: pointer to the HW structure
*
* Clears the hardware counters by reading the counter registers.
......
drivers/net/igb/e1000_mac.c
浏览文件 @ 733596be
......@@ -39,7 +39,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
/**
* e1000_remove_device - Free device specific structure
* igb_remove_device - Free device specific structure
* @hw: pointer to the HW structure
*
* If a device specific structure was allocated, this function will
......@@ -73,7 +73,7 @@ static s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
}
/**
* e1000_get_bus_info_pcie - Get PCIe bus information
* igb_get_bus_info_pcie - Get PCIe bus information
* @hw: pointer to the HW structure
*
* Determines and stores the system bus information for a particular
......@@ -113,7 +113,7 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
}
/**
* e1000_clear_vfta - Clear VLAN filter table
* igb_clear_vfta - Clear VLAN filter table
* @hw: pointer to the HW structure
*
* Clears the register array which contains the VLAN filter table by
......@@ -130,7 +130,7 @@ void igb_clear_vfta(struct e1000_hw *hw)
}
/**
* e1000_write_vfta - Write value to VLAN filter table
* igb_write_vfta - Write value to VLAN filter table
* @hw: pointer to the HW structure
* @offset: register offset in VLAN filter table
* @value: register value written to VLAN filter table
......@@ -145,7 +145,7 @@ void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
}
/**
* e1000_init_rx_addrs - Initialize receive address's
* igb_init_rx_addrs - Initialize receive address's
* @hw: pointer to the HW structure
* @rar_count: receive address registers
*
......@@ -173,7 +173,7 @@ void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
}
/**
* e1000_check_alt_mac_addr - Check for alternate MAC addr
* igb_check_alt_mac_addr - Check for alternate MAC addr
* @hw: pointer to the HW structure
*
* Checks the nvm for an alternate MAC address. An alternate MAC address
......@@ -233,7 +233,7 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
}
/**
* e1000_rar_set - Set receive address register
* igb_rar_set - Set receive address register
* @hw: pointer to the HW structure
* @addr: pointer to the receive address
* @index: receive address array register
......@@ -263,7 +263,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
}
/**
* e1000_mta_set - Set multicast filter table address
* igb_mta_set - Set multicast filter table address
* @hw: pointer to the HW structure
* @hash_value: determines the MTA register and bit to set
*
......@@ -298,7 +298,7 @@ static void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
}
/**
* e1000_update_mc_addr_list - Update Multicast addresses
* igb_update_mc_addr_list - Update Multicast addresses
* @hw: pointer to the HW structure
* @mc_addr_list: array of multicast addresses to program
* @mc_addr_count: number of multicast addresses to program
......@@ -352,7 +352,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw,
}
/**
* e1000_hash_mc_addr - Generate a multicast hash value
* igb_hash_mc_addr - Generate a multicast hash value
* @hw: pointer to the HW structure
* @mc_addr: pointer to a multicast address
*
......@@ -423,7 +423,7 @@ static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
}
/**
* e1000_clear_hw_cntrs_base - Clear base hardware counters
* igb_clear_hw_cntrs_base - Clear base hardware counters
* @hw: pointer to the HW structure
*
* Clears the base hardware counters by reading the counter registers.
......@@ -472,7 +472,7 @@ void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
}
/**
* e1000_check_for_copper_link - Check for link (Copper)
* igb_check_for_copper_link - Check for link (Copper)
* @hw: pointer to the HW structure
*
* Checks to see of the link status of the hardware has changed. If a
......@@ -547,7 +547,7 @@ s32 igb_check_for_copper_link(struct e1000_hw *hw)
}
/**
* e1000_setup_link - Setup flow control and link settings
* igb_setup_link - Setup flow control and link settings
* @hw: pointer to the HW structure
*
* Determines which flow control settings to use, then configures flow
......@@ -606,7 +606,7 @@ s32 igb_setup_link(struct e1000_hw *hw)
}
/**
* e1000_config_collision_dist - Configure collision distance
* igb_config_collision_dist - Configure collision distance
* @hw: pointer to the HW structure
*
* Configures the collision distance to the default value and is used
......@@ -627,7 +627,7 @@ void igb_config_collision_dist(struct e1000_hw *hw)
}
/**
* e1000_set_fc_watermarks - Set flow control high/low watermarks
* igb_set_fc_watermarks - Set flow control high/low watermarks
* @hw: pointer to the HW structure
*
* Sets the flow control high/low threshold (watermark) registers. If
......@@ -665,7 +665,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw)
}
/**
* e1000_set_default_fc - Set flow control default values
* igb_set_default_fc - Set flow control default values
* @hw: pointer to the HW structure
*
* Read the EEPROM for the default values for flow control and store the
......@@ -706,7 +706,7 @@ static s32 igb_set_default_fc(struct e1000_hw *hw)
}
/**
* e1000_force_mac_fc - Force the MAC's flow control settings
* igb_force_mac_fc - Force the MAC's flow control settings
* @hw: pointer to the HW structure
*
* Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
......@@ -770,7 +770,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw)
}
/**
* e1000_config_fc_after_link_up - Configures flow control after link
* igb_config_fc_after_link_up - Configures flow control after link
* @hw: pointer to the HW structure
*
* Checks the status of auto-negotiation after link up to ensure that the
......@@ -991,7 +991,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
}
/**
* e1000_get_speed_and_duplex_copper - Retreive current speed/duplex
* igb_get_speed_and_duplex_copper - Retreive current speed/duplex
* @hw: pointer to the HW structure
* @speed: stores the current speed
* @duplex: stores the current duplex
......@@ -1028,7 +1028,7 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
}
/**
* e1000_get_hw_semaphore - Acquire hardware semaphore
* igb_get_hw_semaphore - Acquire hardware semaphore
* @hw: pointer to the HW structure
*
* Acquire the HW semaphore to access the PHY or NVM
......@@ -1081,7 +1081,7 @@ s32 igb_get_hw_semaphore(struct e1000_hw *hw)
}
/**
* e1000_put_hw_semaphore - Release hardware semaphore
* igb_put_hw_semaphore - Release hardware semaphore
* @hw: pointer to the HW structure
*
* Release hardware semaphore used to access the PHY or NVM
......@@ -1098,7 +1098,7 @@ void igb_put_hw_semaphore(struct e1000_hw *hw)
}
/**
* e1000_get_auto_rd_done - Check for auto read completion
* igb_get_auto_rd_done - Check for auto read completion
* @hw: pointer to the HW structure
*
* Check EEPROM for Auto Read done bit.
......@@ -1127,7 +1127,7 @@ s32 igb_get_auto_rd_done(struct e1000_hw *hw)
}
/**
* e1000_valid_led_default - Verify a valid default LED config
* igb_valid_led_default - Verify a valid default LED config
* @hw: pointer to the HW structure
* @data: pointer to the NVM (EEPROM)
*
......@@ -1152,7 +1152,7 @@ static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data)
}
/**
* e1000_id_led_init -
* igb_id_led_init -
* @hw: pointer to the HW structure
*
**/
......@@ -1217,7 +1217,7 @@ s32 igb_id_led_init(struct e1000_hw *hw)
}
/**
* e1000_cleanup_led - Set LED config to default operation
* igb_cleanup_led - Set LED config to default operation
* @hw: pointer to the HW structure
*
* Remove the current LED configuration and set the LED configuration
......@@ -1230,7 +1230,7 @@ s32 igb_cleanup_led(struct e1000_hw *hw)
}
/**
* e1000_blink_led - Blink LED
* igb_blink_led - Blink LED
* @hw: pointer to the HW structure
*
* Blink the led's which are set to be on.
......@@ -1263,7 +1263,7 @@ s32 igb_blink_led(struct e1000_hw *hw)
}
/**
* e1000_led_off - Turn LED off
* igb_led_off - Turn LED off
* @hw: pointer to the HW structure
*
* Turn LED off.
......@@ -1290,7 +1290,7 @@ s32 igb_led_off(struct e1000_hw *hw)
}
/**
* e1000_disable_pcie_master - Disables PCI-express master access
* igb_disable_pcie_master - Disables PCI-express master access
* @hw: pointer to the HW structure
*
* Returns 0 (0) if successful, else returns -10
......@@ -1332,7 +1332,7 @@ s32 igb_disable_pcie_master(struct e1000_hw *hw)
}
/**
* e1000_reset_adaptive - Reset Adaptive Interframe Spacing
* igb_reset_adaptive - Reset Adaptive Interframe Spacing
* @hw: pointer to the HW structure
*
* Reset the Adaptive Interframe Spacing throttle to default values.
......@@ -1361,7 +1361,7 @@ void igb_reset_adaptive(struct e1000_hw *hw)
}
/**
* e1000_update_adaptive - Update Adaptive Interframe Spacing
* igb_update_adaptive - Update Adaptive Interframe Spacing
* @hw: pointer to the HW structure
*
* Update the Adaptive Interframe Spacing Throttle value based on the
......@@ -1402,7 +1402,7 @@ void igb_update_adaptive(struct e1000_hw *hw)
}
/**
* e1000_validate_mdi_setting - Verify MDI/MDIx settings
* igb_validate_mdi_setting - Verify MDI/MDIx settings
* @hw: pointer to the HW structure
*
* Verify that when not using auto-negotitation that MDI/MDIx is correctly
......@@ -1424,7 +1424,7 @@ s32 igb_validate_mdi_setting(struct e1000_hw *hw)
}
/**
* e1000_write_8bit_ctrl_reg - Write a 8bit CTRL register
* igb_write_8bit_ctrl_reg - Write a 8bit CTRL register
* @hw: pointer to the HW structure
* @reg: 32bit register offset such as E1000_SCTL
* @offset: register offset to write to
......@@ -1462,7 +1462,7 @@ s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
}
/**
* e1000_enable_mng_pass_thru - Enable processing of ARP's
* igb_enable_mng_pass_thru - Enable processing of ARP's
* @hw: pointer to the HW structure
*
* Verifies the hardware needs to allow ARPs to be processed by the host.
......
drivers/net/igb/e1000_nvm.c
浏览文件 @ 733596be
......@@ -32,7 +32,7 @@
#include "e1000_nvm.h"
/**
* e1000_raise_eec_clk - Raise EEPROM clock
* igb_raise_eec_clk - Raise EEPROM clock
* @hw: pointer to the HW structure
* @eecd: pointer to the EEPROM
*
......@@ -47,7 +47,7 @@ static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
}
/**
* e1000_lower_eec_clk - Lower EEPROM clock
* igb_lower_eec_clk - Lower EEPROM clock
* @hw: pointer to the HW structure
* @eecd: pointer to the EEPROM
*
......@@ -62,7 +62,7 @@ static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
}
/**
* e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
* igb_shift_out_eec_bits - Shift data bits our to the EEPROM
* @hw: pointer to the HW structure
* @data: data to send to the EEPROM
* @count: number of bits to shift out
......@@ -105,7 +105,7 @@ static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
}
/**
* e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
* igb_shift_in_eec_bits - Shift data bits in from the EEPROM
* @hw: pointer to the HW structure
* @count: number of bits to shift in
*
......@@ -143,7 +143,7 @@ static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
}
/**
* e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion
* igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
* @hw: pointer to the HW structure
* @ee_reg: EEPROM flag for polling
*
......@@ -174,7 +174,7 @@ static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
}
/**
* e1000_acquire_nvm - Generic request for access to EEPROM
* igb_acquire_nvm - Generic request for access to EEPROM
* @hw: pointer to the HW structure
*
* Set the EEPROM access request bit and wait for EEPROM access grant bit.
......@@ -210,7 +210,7 @@ s32 igb_acquire_nvm(struct e1000_hw *hw)
}
/**
* e1000_standby_nvm - Return EEPROM to standby state
* igb_standby_nvm - Return EEPROM to standby state
* @hw: pointer to the HW structure
*
* Return the EEPROM to a standby state.
......@@ -273,7 +273,7 @@ static void e1000_stop_nvm(struct e1000_hw *hw)
}
/**
* e1000_release_nvm - Release exclusive access to EEPROM
* igb_release_nvm - Release exclusive access to EEPROM
* @hw: pointer to the HW structure
*
* Stop any current commands to the EEPROM and clear the EEPROM request bit.
......@@ -290,7 +290,7 @@ void igb_release_nvm(struct e1000_hw *hw)
}
/**
* e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
* igb_ready_nvm_eeprom - Prepares EEPROM for read/write
* @hw: pointer to the HW structure
*
* Setups the EEPROM for reading and writing.
......@@ -348,7 +348,7 @@ static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
}
/**
* e1000_read_nvm_eerd - Reads EEPROM using EERD register
* igb_read_nvm_eerd - Reads EEPROM using EERD register
* @hw: pointer to the HW structure
* @offset: offset of word in the EEPROM to read
* @words: number of words to read
......@@ -391,7 +391,7 @@ s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
}
/**
* e1000_write_nvm_spi - Write to EEPROM using SPI
* igb_write_nvm_spi - Write to EEPROM using SPI
* @hw: pointer to the HW structure
* @offset: offset within the EEPROM to be written to
* @words: number of words to write
......@@ -475,7 +475,7 @@ s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
}
/**
* e1000_read_part_num - Read device part number
* igb_read_part_num - Read device part number
* @hw: pointer to the HW structure
* @part_num: pointer to device part number
*
......@@ -506,7 +506,7 @@ s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num)
}
/**
* e1000_read_mac_addr - Read device MAC address
* igb_read_mac_addr - Read device MAC address
* @hw: pointer to the HW structure
*
* Reads the device MAC address from the EEPROM and stores the value.
......@@ -541,7 +541,7 @@ s32 igb_read_mac_addr(struct e1000_hw *hw)
}
/**
* e1000_validate_nvm_checksum - Validate EEPROM checksum
* igb_validate_nvm_checksum - Validate EEPROM checksum
* @hw: pointer to the HW structure
*
* Calculates the EEPROM checksum by reading/adding each word of the EEPROM
......@@ -573,7 +573,7 @@ s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
}
/**
* e1000_update_nvm_checksum - Update EEPROM checksum
* igb_update_nvm_checksum - Update EEPROM checksum
* @hw: pointer to the HW structure
*
* Updates the EEPROM checksum by reading/adding each word of the EEPROM
......
drivers/net/igb/e1000_phy.c
浏览文件 @ 733596be
......@@ -61,7 +61,7 @@ static const u16 e1000_igp_2_cable_length_table[] =
sizeof(e1000_igp_2_cable_length_table[0]))
/**
* e1000_check_reset_block - Check if PHY reset is blocked
* igb_check_reset_block - Check if PHY reset is blocked
* @hw: pointer to the HW structure
*
* Read the PHY management control register and check whether a PHY reset
......@@ -79,7 +79,7 @@ s32 igb_check_reset_block(struct e1000_hw *hw)
}
/**
* e1000_get_phy_id - Retrieve the PHY ID and revision
* igb_get_phy_id - Retrieve the PHY ID and revision
* @hw: pointer to the HW structure
*
* Reads the PHY registers and stores the PHY ID and possibly the PHY
......@@ -109,7 +109,7 @@ s32 igb_get_phy_id(struct e1000_hw *hw)
}
/**
* e1000_phy_reset_dsp - Reset PHY DSP
* igb_phy_reset_dsp - Reset PHY DSP
* @hw: pointer to the HW structure
*
* Reset the digital signal processor.
......@@ -129,7 +129,7 @@ static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
}
/**
* e1000_read_phy_reg_mdic - Read MDI control register
* igb_read_phy_reg_mdic - Read MDI control register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
......@@ -188,7 +188,7 @@ static s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
* e1000_write_phy_reg_mdic - Write MDI control register
* igb_write_phy_reg_mdic - Write MDI control register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write to register at offset
......@@ -246,7 +246,7 @@ static s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
}
/**
* e1000_read_phy_reg_igp - Read igp PHY register
* igb_read_phy_reg_igp - Read igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
......@@ -284,7 +284,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
* e1000_write_phy_reg_igp - Write igp PHY register
* igb_write_phy_reg_igp - Write igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
......@@ -321,7 +321,7 @@ s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
}
/**
* e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link
* igb_copper_link_setup_m88 - Setup m88 PHY's for copper link
* @hw: pointer to the HW structure
*
* Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
......@@ -432,7 +432,7 @@ s32 igb_copper_link_setup_m88(struct e1000_hw *hw)
}
/**
* e1000_copper_link_setup_igp - Setup igp PHY's for copper link
* igb_copper_link_setup_igp - Setup igp PHY's for copper link
* @hw: pointer to the HW structure
*
* Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
......@@ -570,7 +570,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw)
}
/**
* e1000_copper_link_autoneg - Setup/Enable autoneg for copper link
* igb_copper_link_autoneg - Setup/Enable autoneg for copper link
* @hw: pointer to the HW structure
*
* Performs initial bounds checking on autoneg advertisement parameter, then
......@@ -638,7 +638,7 @@ s32 igb_copper_link_autoneg(struct e1000_hw *hw)
}
/**
* e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
* igb_phy_setup_autoneg - Configure PHY for auto-negotiation
* @hw: pointer to the HW structure
*
* Reads the MII auto-neg advertisement register and/or the 1000T control
......@@ -805,7 +805,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw)
}
/**
* e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
* igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
* @hw: pointer to the HW structure
*
* Calls the PHY setup function to force speed and duplex. Clears the
......@@ -878,7 +878,7 @@ s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw)
}
/**
* e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
* igb_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
* @hw: pointer to the HW structure
*
* Calls the PHY setup function to force speed and duplex. Clears the
......@@ -993,7 +993,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
}
/**
* e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
* igb_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
* @hw: pointer to the HW structure
* @phy_ctrl: pointer to current value of PHY_CONTROL
*
......@@ -1054,7 +1054,7 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
}
/**
* e1000_set_d3_lplu_state - Sets low power link up state for D3
* igb_set_d3_lplu_state - Sets low power link up state for D3
* @hw: pointer to the HW structure
* @active: boolean used to enable/disable lplu
*
......@@ -1146,7 +1146,7 @@ s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
}
/**
* e1000_check_downshift - Checks whether a downshift in speed occured
* igb_check_downshift - Checks whether a downshift in speed occured
* @hw: pointer to the HW structure
*
* Success returns 0, Failure returns 1
......@@ -1188,7 +1188,7 @@ s32 igb_check_downshift(struct e1000_hw *hw)
}
/**
* e1000_check_polarity_m88 - Checks the polarity.
* igb_check_polarity_m88 - Checks the polarity.
* @hw: pointer to the HW structure
*
* Success returns 0, Failure returns -E1000_ERR_PHY (-2)
......@@ -1212,7 +1212,7 @@ static s32 igb_check_polarity_m88(struct e1000_hw *hw)
}
/**
* e1000_check_polarity_igp - Checks the polarity.
* igb_check_polarity_igp - Checks the polarity.
* @hw: pointer to the HW structure
*
* Success returns 0, Failure returns -E1000_ERR_PHY (-2)
......@@ -1260,7 +1260,7 @@ static s32 igb_check_polarity_igp(struct e1000_hw *hw)
}
/**
* e1000_wait_autoneg - Wait for auto-neg compeletion
* igb_wait_autoneg - Wait for auto-neg compeletion
* @hw: pointer to the HW structure
*
* Waits for auto-negotiation to complete or for the auto-negotiation time
......@@ -1292,7 +1292,7 @@ static s32 igb_wait_autoneg(struct e1000_hw *hw)
}
/**
* e1000_phy_has_link - Polls PHY for link
* igb_phy_has_link - Polls PHY for link
* @hw: pointer to the HW structure
* @iterations: number of times to poll for link
* @usec_interval: delay between polling attempts
......@@ -1332,7 +1332,7 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
}
/**
* e1000_get_cable_length_m88 - Determine cable length for m88 PHY
* igb_get_cable_length_m88 - Determine cable length for m88 PHY
* @hw: pointer to the HW structure
*
* Reads the PHY specific status register to retrieve the cable length
......@@ -1369,7 +1369,7 @@ s32 igb_get_cable_length_m88(struct e1000_hw *hw)
}
/**
* e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY
* igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY
* @hw: pointer to the HW structure
*
* The automatic gain control (agc) normalizes the amplitude of the
......@@ -1442,7 +1442,7 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
}
/**
* e1000_get_phy_info_m88 - Retrieve PHY information
* igb_get_phy_info_m88 - Retrieve PHY information
* @hw: pointer to the HW structure
*
* Valid for only copper links. Read the PHY status register (sticky read)
......@@ -1523,7 +1523,7 @@ s32 igb_get_phy_info_m88(struct e1000_hw *hw)
}
/**
* e1000_get_phy_info_igp - Retrieve igp PHY information
* igb_get_phy_info_igp - Retrieve igp PHY information
* @hw: pointer to the HW structure
*
* Read PHY status to determine if link is up. If link is up, then
......@@ -1590,7 +1590,7 @@ s32 igb_get_phy_info_igp(struct e1000_hw *hw)
}
/**
* e1000_phy_sw_reset - PHY software reset
* igb_phy_sw_reset - PHY software reset
* @hw: pointer to the HW structure
*
* Does a software reset of the PHY by reading the PHY control register and
......@@ -1617,7 +1617,7 @@ s32 igb_phy_sw_reset(struct e1000_hw *hw)
}
/**
* e1000_phy_hw_reset - PHY hardware reset
* igb_phy_hw_reset - PHY hardware reset
* @hw: pointer to the HW structure
*
* Verify the reset block is not blocking us from resetting. Acquire
......@@ -1663,7 +1663,7 @@ s32 igb_phy_hw_reset(struct e1000_hw *hw)
/* Internal function pointers */
/**
* e1000_get_phy_cfg_done - Generic PHY configuration done
* igb_get_phy_cfg_done - Generic PHY configuration done
* @hw: pointer to the HW structure
*
* Return success if silicon family did not implement a family specific
......@@ -1678,7 +1678,7 @@ static s32 igb_get_phy_cfg_done(struct e1000_hw *hw)
}
/**
* e1000_release_phy - Generic release PHY
* igb_release_phy - Generic release PHY
* @hw: pointer to the HW structure
*
* Return if silicon family does not require a semaphore when accessing the
......@@ -1691,7 +1691,7 @@ static void igb_release_phy(struct e1000_hw *hw)
}
/**
* e1000_acquire_phy - Generic acquire PHY
* igb_acquire_phy - Generic acquire PHY
* @hw: pointer to the HW structure
*
* Return success if silicon family does not require a semaphore when
......@@ -1706,7 +1706,7 @@ static s32 igb_acquire_phy(struct e1000_hw *hw)
}
/**
* e1000_phy_force_speed_duplex - Generic force PHY speed/duplex
* igb_phy_force_speed_duplex - Generic force PHY speed/duplex
* @hw: pointer to the HW structure
*
* When the silicon family has not implemented a forced speed/duplex
......@@ -1721,7 +1721,7 @@ s32 igb_phy_force_speed_duplex(struct e1000_hw *hw)
}
/**
* e1000_phy_init_script_igp3 - Inits the IGP3 PHY
* igb_phy_init_script_igp3 - Inits the IGP3 PHY
* @hw: pointer to the HW structure
*
* Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或