提交 73008b98 编写于 作者: V Ville Syrjälä 提交者: Daniel Vetter

drm/i915: Clean up VLV rps code a bit

Always print both the MHz value and raw register value for rps stuff.

Also kill a somewhat pointless local 'rpe' variable and just use
dev_priv->rps.rpe_delay.

While at it clean up the caps in "GPU" and "Punit" debug messages.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 a35cdaa0
......@@ -3080,10 +3080,11 @@ void valleyview_set_rps(struct drm_device *dev, u8 val)
WARN_ON(val > dev_priv->rps.max_delay);
WARN_ON(val < dev_priv->rps.min_delay);
DRM_DEBUG_DRIVER("gpu freq request from %d to %d\n",
DRM_DEBUG_DRIVER("GPU freq request from %d MHz (%u) to %d MHz (%u)\n",
vlv_gpu_freq(dev_priv->mem_freq,
dev_priv->rps.cur_delay),
vlv_gpu_freq(dev_priv->mem_freq, val));
dev_priv->rps.cur_delay,
vlv_gpu_freq(dev_priv->mem_freq, val), val);
if (val == dev_priv->rps.cur_delay)
return;
......@@ -3101,8 +3102,9 @@ void valleyview_set_rps(struct drm_device *dev, u8 val)
pval = vlv_punit_read(dev_priv, PUNIT_REG_GPU_FREQ_STS);
if ((pval >> 8) != val)
DRM_DEBUG_DRIVER("punit overrode freq: %d requested, but got %d\n",
val, pval >> 8);
DRM_DEBUG_DRIVER("Punit overrode GPU freq: %d MHz (%u) requested, but got %d Mhz (%u)\n",
vlv_gpu_freq(dev_priv->mem_freq, val), val,
vlv_gpu_freq(dev_priv->mem_freq, pval >> 8), pval >> 8);
/* Make sure we continue to get interrupts
* until we hit the minimum or maximum frequencies.
......@@ -3496,7 +3498,7 @@ static void valleyview_enable_rps(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
u32 gtfifodbg, val, rpe;
u32 gtfifodbg, val;
int i;
WARN_ON(!mutex_is_locked(&dev_priv->rps.hw_lock));
......@@ -3557,31 +3559,39 @@ static void valleyview_enable_rps(struct drm_device *dev)
DRM_DEBUG_DRIVER("GPLL enabled? %s\n", val & 0x10 ? "yes" : "no");
DRM_DEBUG_DRIVER("GPU status: 0x%08x\n", val);
DRM_DEBUG_DRIVER("current GPU freq: %d\n",
vlv_gpu_freq(dev_priv->mem_freq, (val >> 8) & 0xff));
dev_priv->rps.cur_delay = (val >> 8) & 0xff;
DRM_DEBUG_DRIVER("current GPU freq: %d MHz (%u)\n",
vlv_gpu_freq(dev_priv->mem_freq,
dev_priv->rps.cur_delay),
dev_priv->rps.cur_delay);
dev_priv->rps.max_delay = valleyview_rps_max_freq(dev_priv);
dev_priv->rps.hw_max = dev_priv->rps.max_delay;
DRM_DEBUG_DRIVER("max GPU freq: %d\n", vlv_gpu_freq(dev_priv->mem_freq,
dev_priv->rps.max_delay));
DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
vlv_gpu_freq(dev_priv->mem_freq,
dev_priv->rps.max_delay),
dev_priv->rps.max_delay);
rpe = valleyview_rps_rpe_freq(dev_priv);
DRM_DEBUG_DRIVER("RPe GPU freq: %d\n",
vlv_gpu_freq(dev_priv->mem_freq, rpe));
dev_priv->rps.rpe_delay = rpe;
dev_priv->rps.rpe_delay = valleyview_rps_rpe_freq(dev_priv);
DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
vlv_gpu_freq(dev_priv->mem_freq,
dev_priv->rps.rpe_delay),
dev_priv->rps.rpe_delay);
val = valleyview_rps_min_freq(dev_priv);
DRM_DEBUG_DRIVER("min GPU freq: %d\n", vlv_gpu_freq(dev_priv->mem_freq,
val));
dev_priv->rps.min_delay = val;
dev_priv->rps.min_delay = valleyview_rps_min_freq(dev_priv);
DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
vlv_gpu_freq(dev_priv->mem_freq,
dev_priv->rps.min_delay),
dev_priv->rps.min_delay);
DRM_DEBUG_DRIVER("setting GPU freq to %d\n",
vlv_gpu_freq(dev_priv->mem_freq, rpe));
DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n",
vlv_gpu_freq(dev_priv->mem_freq,
dev_priv->rps.rpe_delay),
dev_priv->rps.rpe_delay);
INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work);
valleyview_set_rps(dev_priv->dev, rpe);
valleyview_set_rps(dev_priv->dev, dev_priv->rps.rpe_delay);
/* requires MSI enabled */
I915_WRITE(GEN6_PMIER, GEN6_PM_RPS_EVENTS);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册