ieee802154: introduce wpan_phy_supported

This patch introduce the wpan_phy_supported struct for wpan_phy. There
is currently no way to check if a transceiver can handle IEEE 802.15.4
complaint values. With this struct we can check before if the
transceiver supports these values before sending to driver layer.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Suggested-by: NPhoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de>
Acked-by: NVarka Bhadram <varkabhadram@gmail.com>
Cc: Alan Ott <alan@signal11.us>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

drivers/net/ieee802154/at86rf230.c

@@ -1579,7 +1579,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 	case 3:
 		chip = "at86rf231";
 		lp->data = &at86rf231_data;
-		lp->hw->phy->channels_supported[0] = 0x7FFF800;
+		lp->hw->phy->supported.channels[0] = 0x7FFF800;
 		lp->hw->phy->current_channel = 11;
 		lp->hw->phy->symbol_duration = 16;
 		break;
@@ -1587,15 +1587,15 @@ at86rf230_detect_device(struct at86rf230_local *lp)
 		chip = "at86rf212";
 		lp->data = &at86rf212_data;
 		lp->hw->flags |= IEEE802154_HW_LBT;
-		lp->hw->phy->channels_supported[0] = 0x00007FF;
-		lp->hw->phy->channels_supported[2] = 0x00007FF;
+		lp->hw->phy->supported.channels[0] = 0x00007FF;
+		lp->hw->phy->supported.channels[2] = 0x00007FF;
 		lp->hw->phy->current_channel = 5;
 		lp->hw->phy->symbol_duration = 25;
 		break;
 	case 11:
 		chip = "at86rf233";
 		lp->data = &at86rf233_data;
-		lp->hw->phy->channels_supported[0] = 0x7FFF800;
+		lp->hw->phy->supported.channels[0] = 0x7FFF800;
 		lp->hw->phy->current_channel = 13;
 		lp->hw->phy->symbol_duration = 16;
 		break;

drivers/net/ieee802154/cc2520.c

@@ -653,7 +653,7 @@ static int cc2520_register(struct cc2520_private *priv)
 	ieee802154_random_extended_addr(&priv->hw->phy->perm_extended_addr);
 
 	/* We do support only 2.4 Ghz */
-	priv->hw->phy->channels_supported[0] = 0x7FFF800;
+	priv->hw->phy->supported.channels[0] = 0x7FFF800;
 	priv->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
 			  IEEE802154_HW_AFILT;
 

drivers/net/ieee802154/fakelb.c

@@ -149,35 +149,35 @@ static int fakelb_add_one(struct device *dev, struct fakelb_priv *fake)
 	priv->hw = hw;
 
 	/* 868 MHz BPSK	802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 1;
+	hw->phy->supported.channels[0] |= 1;
 	/* 915 MHz BPSK	802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 0x7fe;
+	hw->phy->supported.channels[0] |= 0x7fe;
 	/* 2.4 GHz O-QPSK 802.15.4-2003 */
-	hw->phy->channels_supported[0] |= 0x7FFF800;
+	hw->phy->supported.channels[0] |= 0x7FFF800;
 	/* 868 MHz ASK 802.15.4-2006 */
-	hw->phy->channels_supported[1] |= 1;
+	hw->phy->supported.channels[1] |= 1;
 	/* 915 MHz ASK 802.15.4-2006 */
-	hw->phy->channels_supported[1] |= 0x7fe;
+	hw->phy->supported.channels[1] |= 0x7fe;
 	/* 868 MHz O-QPSK 802.15.4-2006 */
-	hw->phy->channels_supported[2] |= 1;
+	hw->phy->supported.channels[2] |= 1;
 	/* 915 MHz O-QPSK 802.15.4-2006 */
-	hw->phy->channels_supported[2] |= 0x7fe;
+	hw->phy->supported.channels[2] |= 0x7fe;
 	/* 2.4 GHz CSS 802.15.4a-2007 */
-	hw->phy->channels_supported[3] |= 0x3fff;
+	hw->phy->supported.channels[3] |= 0x3fff;
 	/* UWB Sub-gigahertz 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 1;
+	hw->phy->supported.channels[4] |= 1;
 	/* UWB Low band 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 0x1e;
+	hw->phy->supported.channels[4] |= 0x1e;
 	/* UWB High band 802.15.4a-2007 */
-	hw->phy->channels_supported[4] |= 0xffe0;
+	hw->phy->supported.channels[4] |= 0xffe0;
 	/* 750 MHz O-QPSK 802.15.4c-2009 */
-	hw->phy->channels_supported[5] |= 0xf;
+	hw->phy->supported.channels[5] |= 0xf;
 	/* 750 MHz MPSK 802.15.4c-2009 */
-	hw->phy->channels_supported[5] |= 0xf0;
+	hw->phy->supported.channels[5] |= 0xf0;
 	/* 950 MHz BPSK 802.15.4d-2009 */
-	hw->phy->channels_supported[6] |= 0x3ff;
+	hw->phy->supported.channels[6] |= 0x3ff;
 	/* 950 MHz GFSK 802.15.4d-2009 */
-	hw->phy->channels_supported[6] |= 0x3ffc00;
+	hw->phy->supported.channels[6] |= 0x3ffc00;
 
 	INIT_LIST_HEAD(&priv->list);
 	priv->fake = fake;

drivers/net/ieee802154/mrf24j40.c

@@ -750,7 +750,7 @@ static int mrf24j40_probe(struct spi_device *spi)
 
 	devrec->hw->priv = devrec;
 	devrec->hw->parent = &devrec->spi->dev;
-	devrec->hw->phy->channels_supported[0] = CHANNEL_MASK;
+	devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
 	devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
 			    IEEE802154_HW_AFILT;
 

include/net/cfg802154.h

@@ -61,6 +61,10 @@ struct cfg802154_ops {
 				struct wpan_dev *wpan_dev, bool mode);
 };
 
+struct wpan_phy_supported {
+	u32 channels[IEEE802154_MAX_PAGE + 1];
+};
+
 struct wpan_phy_cca {
 	enum nl802154_cca_modes mode;
 	enum nl802154_cca_opts opt;
@@ -84,7 +88,7 @@ struct wpan_phy {
 	 */
 	u8 current_channel;
 	u8 current_page;
-	u32 channels_supported[IEEE802154_MAX_PAGE + 1];
+	struct wpan_phy_supported supported;
 	/* current transmit_power in mBm */
 	s32 transmit_power;
 	struct wpan_phy_cca cca;

net/ieee802154/nl-phy.c

@@ -56,8 +56,8 @@ static int ieee802154_nl_fill_phy(struct sk_buff *msg, u32 portid,
 	    nla_put_u8(msg, IEEE802154_ATTR_CHANNEL, phy->current_channel))
 		goto nla_put_failure;
 	for (i = 0; i < 32; i++) {
-		if (phy->channels_supported[i])
-			buf[pages++] = phy->channels_supported[i] | (i << 27);
+		if (phy->supported.channels[i])
+			buf[pages++] = phy->supported.channels[i] | (i << 27);
 	}
 	if (pages &&
 	    nla_put(msg, IEEE802154_ATTR_CHANNEL_PAGE_LIST,

net/ieee802154/nl802154.c

@@ -248,7 +248,7 @@ nl802154_send_wpan_phy_channels(struct cfg802154_registered_device *rdev,
 
 	for (page = 0; page <= IEEE802154_MAX_PAGE; page++) {
 		if (nla_put_u32(msg, NL802154_ATTR_SUPPORTED_CHANNEL,
-				rdev->wpan_phy.channels_supported[page]))
+				rdev->wpan_phy.supported.channels[page]))
 			return -ENOBUFS;
 	}
 	nla_nest_end(msg, nl_page);
@@ -626,7 +626,7 @@ static int nl802154_set_channel(struct sk_buff *skb, struct genl_info *info)
 
 	/* check 802.15.4 constraints */
 	if (page > IEEE802154_MAX_PAGE || channel > IEEE802154_MAX_CHANNEL ||
-	    !(rdev->wpan_phy.channels_supported[page] & BIT(channel)))
+	    !(rdev->wpan_phy.supported.channels[page] & BIT(channel)))
 		return -EINVAL;
 
 	return rdev_set_channel(rdev, page, channel);