提交 724c8525 编写于 作者: U Uwe Kleine-König 提交者: Greg Kroah-Hartman

USB: ehci/mxc: compile fix

Commit
	65fd4272 (USB: ehci tdi : let's tdi_reset set host mode)

broke the build using ARM's mx51_defconfig:

 	  CC      drivers/usb/host/ehci-hcd.o
 	In file included from drivers/usb/host/ehci-hcd.c:1166:
 	drivers/usb/host/ehci-mxc.c: In function 'ehci_mxc_drv_probe':
 	drivers/usb/host/ehci-mxc.c:192: error: 'ehci' undeclared (first use in this function)
 	drivers/usb/host/ehci-mxc.c:192: error: (Each undeclared identifier is reported only once
 	drivers/usb/host/ehci-mxc.c:192: error: for each function it appears in.)
 	drivers/usb/host/ehci-mxc.c:117: warning: unused variable 'temp'
 	make[3]: *** [drivers/usb/host/ehci-hcd.o] Error 1
 	make[2]: *** [drivers/usb/host/ehci-hcd.o] Error 2
 	make[1]: *** [sub-make] Error 2
 	make: *** [all] Error 2

Fix it together with the warning about the unused variable and use
msleep instead of mdelay as requested by Alan Stern.

Cc: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: NNguyen Dinh-R00091 <R00091@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 018b97d0
......@@ -36,6 +36,8 @@ struct ehci_mxc_priv {
static int ehci_mxc_setup(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct device *dev = hcd->self.controller;
struct mxc_usbh_platform_data *pdata = dev_get_platdata(dev);
int retval;
/* EHCI registers start at offset 0x100 */
......@@ -63,6 +65,12 @@ static int ehci_mxc_setup(struct usb_hcd *hcd)
ehci_reset(ehci);
/* set up the PORTSCx register */
ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
/* is this really needed? */
msleep(10);
ehci_port_power(ehci, 0);
return 0;
}
......@@ -114,7 +122,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
struct mxc_usbh_platform_data *pdata = pdev->dev.platform_data;
struct usb_hcd *hcd;
struct resource *res;
int irq, ret, temp;
int irq, ret;
struct ehci_mxc_priv *priv;
struct device *dev = &pdev->dev;
......@@ -188,10 +196,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
clk_enable(priv->ahbclk);
}
/* set up the PORTSCx register */
ehci_writel(ehci, pdata->portsc, &ehci->regs->port_status[0]);
mdelay(10);
/* setup specific usb hw */
ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
if (ret < 0)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册