ARM: 5751/1: ep93xx/micro9: Add Micro9-Slim

Add Contec Micro9-Slim support

Cc: Ryan Mallon <ryan@bluewatersys.com>

Requires: 5750/1
Signed-off-by: NHubert Feurstein <hubert.feurstein@contec.at>
Acked-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-ep93xx/Kconfig

@@ -153,6 +153,14 @@ config MACH_MICRO9L
 	  Say 'Y' here if you want your kernel to support the
 	  Contec Micro9-Lite board.
 
+config MACH_MICRO9S
+	bool "Support Contec Micro9-Slim"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Micro9-Slim board.
+
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET

arch/arm/mach-ep93xx/micro9.c

@@ -28,6 +28,7 @@
  * Micro9-High has up to 64MB of 32-bit flash on CS1
  * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
  * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
 static struct physmap_flash_data micro9_flash_data;
 
@@ -70,7 +71,7 @@ static void __init micro9_register_flash(void)
 {
 	if (machine_is_micro9())
 		__micro9_register_flash(4);
-	else if (machine_is_micro9m())
+	else if (machine_is_micro9m() || machine_is_micro9s())
 		__micro9_register_flash(micro9_detect_bootwidth());
 }
 
@@ -129,3 +130,16 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
+
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9_init_machine,
+MACHINE_END
+#endif