提交 71bd98af 编写于 作者: A Arnd Bergmann

Merge tag 'mvebu_fixes_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux into fixes

From Jason Cooper <jason@lakedaemon.net>:

mvebu fixes for v3.9 round 3

 - Kirkwood
    - a couple of small fixes for the Iomega ix2-200 board (ether and led)
 - mvebu
    - allow GPIO button to work on Mirabox when running SMP

* tag 'mvebu_fixes_for_v3.9_round3' of git://git.infradead.org/users/jcooper/linux:
  arm: mvebu: Fix the irq map function in SMP mode
  Fix GE0/GE1 init on ix2-200 as GE0 has no PHY
  ARM: Kirkwood: Fix typo in the definition of ix2-200 rebuild LED
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
......@@ -96,11 +96,11 @@
marvell,function = "gpio";
};
pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
marvell,pins = "mpp44";
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
marvell,pins = "mpp45";
marvell,pins = "mpp47";
marvell,function = "gpio";
};
......@@ -157,14 +157,14 @@
gpios = <&gpio0 16 0>;
linux,default-trigger = "default-on";
};
health_led1 {
rebuild_led {
label = "status:white:rebuild_led";
gpios = <&gpio1 4 0>;
};
health_led {
label = "status:red:health_led";
gpios = <&gpio1 5 0>;
};
health_led2 {
label = "status:white:health_led";
gpios = <&gpio1 4 0>;
};
backup_led {
label = "status:blue:backup_led";
gpios = <&gpio0 15 0>;
......
......@@ -20,10 +20,15 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
.duplex = DUPLEX_FULL,
};
static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
void __init iomega_ix2_200_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
}
......@@ -61,7 +61,6 @@ static struct irq_domain *armada_370_xp_mpic_domain;
*/
static void armada_370_xp_irq_mask(struct irq_data *d)
{
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
......@@ -70,15 +69,10 @@ static void armada_370_xp_irq_mask(struct irq_data *d)
else
writel(hwirq, per_cpu_int_base +
ARMADA_370_XP_INT_SET_MASK_OFFS);
#else
writel(irqd_to_hwirq(d),
per_cpu_int_base + ARMADA_370_XP_INT_SET_MASK_OFFS);
#endif
}
static void armada_370_xp_irq_unmask(struct irq_data *d)
{
#ifdef CONFIG_SMP
irq_hw_number_t hwirq = irqd_to_hwirq(d);
if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
......@@ -87,10 +81,6 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
else
writel(hwirq, per_cpu_int_base +
ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
#else
writel(irqd_to_hwirq(d),
per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
#endif
}
#ifdef CONFIG_SMP
......@@ -146,7 +136,11 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
unsigned int virq, irq_hw_number_t hw)
{
armada_370_xp_irq_mask(irq_get_irq_data(virq));
writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
writel(hw, per_cpu_int_base +
ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
else
writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
irq_set_status_flags(virq, IRQ_LEVEL);
if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册