提交 71ae391d 编写于 作者: M Mark Brown

Merge branch 'for-3.0' into for-3.1

......@@ -161,10 +161,18 @@ static int aic26_hw_params(struct snd_pcm_substream *substream,
dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
}
/* Configure PLL */
/**
* Configure PLL
* fsref = (mclk * PLLM) / 2048
* where PLLM = J.DDDD (DDDD register ranges from 0 to 9999, decimal)
*/
pval = 1;
jval = (fsref == 44100) ? 7 : 8;
dval = (fsref == 44100) ? 5264 : 1920;
/* compute J portion of multiplier */
jval = fsref / (aic26->mclk / 2048);
/* compute fractional DDDD component of multiplier */
dval = fsref - (jval * (aic26->mclk / 2048));
dval = (10000 * dval) / (aic26->mclk / 2048);
dev_dbg(&aic26->spi->dev, "Setting PLLM to %d.%04d\n", jval, dval);
qval = 0;
reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
......
......@@ -1114,12 +1114,19 @@ static int aic3x_set_power(struct snd_soc_codec *codec, int power)
/* Sync reg_cache with the hardware */
codec->cache_only = 0;
for (i = 0; i < ARRAY_SIZE(aic3x_reg); i++)
for (i = AIC3X_SAMPLE_RATE_SEL_REG; i < ARRAY_SIZE(aic3x_reg); i++)
snd_soc_write(codec, i, cache[i]);
if (aic3x->model == AIC3X_MODEL_3007)
aic3x_init_3007(codec);
codec->cache_sync = 0;
} else {
/*
* Do soft reset to this codec instance in order to clear
* possible VDD leakage currents in case the supply regulators
* remain on
*/
snd_soc_write(codec, AIC3X_RESET, SOFT_RESET);
codec->cache_sync = 1;
aic3x->power = 0;
/* HW writes are needless when bias is off */
codec->cache_only = 1;
......
......@@ -1433,8 +1433,9 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card)
"%s", card->name);
snprintf(card->snd_card->longname, sizeof(card->snd_card->longname),
"%s", card->long_name ? card->long_name : card->name);
snprintf(card->snd_card->driver, sizeof(card->snd_card->driver),
"%s", card->driver_name ? card->driver_name : card->name);
if (card->driver_name)
strlcpy(card->snd_card->driver, card->driver_name,
sizeof(card->snd_card->driver));
if (card->late_probe) {
ret = card->late_probe(card);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册