Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next

Freescale updates from Scott:

"Highlights include more 8xx optimizations, device tree updates,
and MVME7100 support."

Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/network.txt → Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt

@@ -41,3 +41,84 @@ Example:
 		fsl,mdio-pin = <12>;
 		fsl,mdc-pin = <13>;
 	};
+
+* HDLC
+
+Currently defined compatibles:
+- fsl,ucc-hdlc
+
+Properties for fsl,ucc-hdlc:
+- rx-clock-name
+- tx-clock-name
+	Usage: required
+	Value type: <string>
+	Definition : Must be "brg1"-"brg16" for internal clock source,
+		     Must be "clk1"-"clk24" for external clock source.
+
+- fsl,tdm-interface
+	Usage: optional
+	Value type: <empty>
+	Definition : Specify that hdlc is based on tdm-interface
+
+The property below is dependent on fsl,tdm-interface:
+- fsl,rx-sync-clock
+	Usage: required
+	Value type: <string>
+	Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15".
+
+- fsl,tx-sync-clock
+	Usage: required
+	Value type: <string>
+	Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15".
+
+- fsl,tdm-framer-type
+	Usage: required for tdm interface
+	Value type: <string>
+	Definition : "e1" or "t1".Now e1 and t1 are used, other framer types
+		     are not supported.
+
+- fsl,tdm-id
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : number of TDM ID
+
+- fsl,tx-timeslot-mask
+- fsl,rx-timeslot-mask
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : time slot mask for TDM operation. Indicates which time
+		     slots used for transmitting and receiving.
+
+- fsl,siram-entry-id
+	Usage: required for tdm interface
+	Value type: <u32>
+	Definition : Must be 0,2,4...64. the number of TDM entry.
+
+- fsl,tdm-internal-loopback
+	usage: optional for tdm interface
+	value type: <empty>
+	Definition : Internal loopback connecting on TDM layer.
+
+Example for tdm interface:
+
+	ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "clk8";
+		tx-clock-name = "clk9";
+		fsl,rx-sync-clock = "rsync_pin";
+		fsl,tx-sync-clock = "tsync_pin";
+		fsl,tx-timeslot-mask = <0xfffffffe>;
+		fsl,rx-timeslot-mask = <0xfffffffe>;
+		fsl,tdm-framer-type = "e1";
+		fsl,tdm-id = <0>;
+		fsl,siram-entry-id = <0>;
+		fsl,tdm-interface;
+	};
+
+Example for hdlc without tdm interface:
+
+	ucc@2000 {
+		compatible = "fsl,ucc-hdlc";
+		rx-clock-name = "brg1";
+		tx-clock-name = "brg1";
+	};

Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt → Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe.txt

@@ -69,6 +69,58 @@ Example:
 	};
      };
 
+* Interrupt Controller (IC)
+
+Required properties:
+- compatible : should be "fsl,qe-ic".
+- reg : Address range of IC register set.
+- interrupts : interrupts generated by the device.
+- interrupt-controller : this device is a interrupt controller.
+
+Example:
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>;
+	};
+
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial drivers
+, the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : must be "fsl,<chip>-qe-si". For t1040, must contain
+  "fsl,t1040-qe-si".
+- reg : Address range of SI register set.
+
+Example:
+
+	si1: si@700 {
+		compatible = "fsl,t1040-qe-si";
+		reg = <0x700 0x80>;
+	};
+
+* Serial Interface Block RAM(SIRAM)
+
+store the routing entries of SI
+
+Required properties:
+- compatible : should be "fsl,<chip>-qe-siram". For t1040, must contain
+  "fsl,t1040-qe-siram".
+- reg : Address range of SI RAM.
+
+Example:
+
+	siram1: siram@1000 {
+		compatible = "fsl,t1040-qe-siram";
+		reg = <0x1000 0x800>;
+	};
+
 * QE Firmware Node
 
 This node defines a firmware binary that is embedded in the device tree, for

Documentation/devicetree/bindings/soc/fsl/cpm_qe/uqe_serial.txt

+* Serial
+
+Required Properties:
+compatible : must be "fsl,<chip>-ucc-uart". For t1040, must be
+"fsl,t1040-ucc-uart".
+port-number : port number of UCC-UART
+tx/rx-clock-name : should be "brg1"-"brg16" for internal clock source,
+		   should be "clk1"-"clk28" for external clock source.
+
+Example:
+
+	ucc_serial: ucc@2200 {
+		compatible = "fsl,t1040-ucc-uart";
+		port-number = <0>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+	};

arch/powerpc/Kconfig

@@ -166,6 +166,7 @@ config PPC
 	select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
 	select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select GENERIC_CPU_AUTOPROBE
+	select HAVE_VIRT_CPU_ACCOUNTING
 
 config GENERIC_CSUM
 	def_bool CPU_LITTLE_ENDIAN
@@ -1056,6 +1057,11 @@ config CONSISTENT_SIZE
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
 	depends on ADVANCED_OPTIONS && 8xx
+
+config PIN_TLB_IMMR
+	bool "Pinned TLB for IMMR"
+	depends on PIN_TLB
+	default y
 endmenu
 
 if PPC64

arch/powerpc/Kconfig.debug

@@ -212,7 +212,6 @@ config PPC_EARLY_DEBUG_40x
 config PPC_EARLY_DEBUG_CPM
 	bool "Early serial debugging for Freescale CPM-based serial ports"
 	depends on SERIAL_CPM
-	select PIN_TLB if PPC_8xx
 	help
 	  Select this to enable early debugging for Freescale chips
 	  using a CPM-based serial port.  This assumes that the bootwrapper

arch/powerpc/boot/Makefile

@@ -113,6 +113,7 @@ src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
 src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S
 src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
 src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
+src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
 
 src-wlib := $(sort $(src-wlib-y))
 src-plat := $(sort $(src-plat-y))
@@ -296,6 +297,9 @@ image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
 image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 
+# Board ports in arch/powerpc/platform/86xx/Kconfig
+image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
+
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2

arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi

@@ -51,6 +51,7 @@
 		serial2 = &serial2;
 		serial3 = &serial3;
 		pci0 = &pci0;
+		usb0 = &usb0;
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;

arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi

@@ -51,6 +51,7 @@
 		serial2 = &serial2;
 		serial3 = &serial3;
 		pci0 = &pci0;
+		usb0 = &usb0;
 		dma0 = &dma0;
 		dma1 = &dma1;
 		sdhc = &sdhc;

arch/powerpc/boot/dts/fsl/kmcoge4.dts

@@ -106,6 +106,43 @@
 		sata@221000 {
 			status = "disabled";
 		};
+
+		fman0: fman@400000 {
+			enet0: ethernet@e0000 {
+				phy-connection-type = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			mdio0: mdio@e1120 {
+				front_phy: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+			};
+
+			enet1: ethernet@e2000 {
+				phy-connection-type = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+			enet2: ethernet@e4000 {
+				status = "disabled";
+			};
+
+			enet3: ethernet@e6000 {
+				status = "disabled";
+			};
+			enet4: ethernet@e8000 {
+				phy-handle = <&front_phy>;
+				phy-connection-type = "rgmii";
+			};
+			enet5: ethernet@f0000 {
+				status = "disabled";
+			};
+		};
 	};
 
 	rio: rapidio@ffe0c0000 {

arch/powerpc/boot/dts/fsl/mvme7100.dts

+/*
+ * Device tree source for the Emerson/Artesyn MVME7100
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+/include/ "mpc8641si-pre.dtsi"
+
+/ {
+	model = "MVME7100";
+	compatible = "artesyn,MVME7100";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>;
+	};
+
+	soc: soc@f1000000 {
+		ranges = <0x00000000 0xf1000000 0x00100000>;
+
+		i2c@3000 {
+			hwmon@4c {
+				compatible = "dallas,max6649";
+				reg = <0x4c>;
+			};
+
+			rtc@68 {
+				status = "disabled";
+			};
+		};
+
+
+		enet0: ethernet@24000 {
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@1 {
+				reg = <1>;
+			};
+			phy1: ethernet-phy@2 {
+				reg = <2>;
+			};
+			phy2: ethernet-phy@3 {
+				reg = <3>;
+			};
+			phy3: ethernet-phy@4 {
+				reg = <4>;
+			};
+		};
+
+		enet1: ethernet@25000 {
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@25520 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@26000 {
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet3: ethernet@27000 {
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@27520 {
+			status = "disabled";
+		};
+
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+	};
+
+	lbc: localbus@f1005000 {
+		reg = <0xf1005000 0x1000>;
+
+		ranges = <0 0 0xf8000000 0x08000000	// NOR Flash (128MB)
+			  2 0 0xf2030000 0x00010000	// NAND Flash (8GB)
+			  3 0 0xf2400000 0x00080000	// MRAM (512KB)
+			  4 0 0xf2000000 0x00010000	// BCSR
+			  5 0 0xf2010000 0x00010000>;	// QUART
+
+		bcsr@4,0 {
+			compatible = "artesyn,mvme7100-bcsr";
+			reg = <4 0 0x10000>;
+		};
+
+		serial@5,1000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x1000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,2000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x2000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,3000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x3000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+
+		serial@5,4000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <5 0x4000 0x100>;
+			clock-frequency = <1843200>;
+			interrupts = <11 1 0 0>;
+		};
+	};
+
+	pci0: pcie@f1008000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@f1009000 {
+		status = "disabled";
+	};
+
+	chosen {
+		linux,stdout-path = &serial0;
+	};
+};
+
+/include/ "mpc8641si-post.dtsi"

arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi

@@ -32,7 +32,7 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-usb@210000 {
+usb0: usb@210000 {
 	compatible = "fsl-usb2-dr";
 	reg = <0x210000 0x1000>;
 	#address-cells = <1>;

arch/powerpc/boot/dts/fsl/t1040si-post.dtsi

@@ -607,7 +607,7 @@
 /include/ "qoriq-gpio-3.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
-			compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+			compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
 			fsl,iommu-parent = <&pamu0>;
 			fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
 			phy_type = "utmi";
@@ -615,7 +615,7 @@
 		};
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
-			compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+			compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 			fsl,iommu-parent = <&pamu0>;
 			fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
 			dr_mode = "host";
@@ -673,3 +673,48 @@
 		};
 	};
 };
+
+&qe {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	device_type = "qe";
+	compatible = "fsl,qe";
+	fsl,qe-num-riscs = <1>;
+	fsl,qe-num-snums = <28>;
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
+
+	ucc@2000 {
+		cell-index = <1>;
+		reg = <0x2000 0x200>;
+		interrupts = <32>;
+		interrupt-parent = <&qeic>;
+	};
+
+	ucc@2200 {
+		cell-index = <3>;
+		reg = <0x2200 0x200>;
+		interrupts = <34>;
+		interrupt-parent = <&qeic>;
+	};
+
+	muram@10000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,qe-muram", "fsl,cpm-muram";
+		ranges = <0x0 0x10000 0x6000>;
+
+		data-only@0 {
+			compatible = "fsl,qe-muram-data",
+			"fsl,cpm-muram-data";
+			reg = <0x0 0x6000>;
+		};
+	};
+};

arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi

@@ -212,4 +212,42 @@
 				  0 0x00010000>;
 		};
 	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
 };

arch/powerpc/boot/dts/fsl/t104xqds.dtsi

@@ -366,4 +366,42 @@
 				  0 0x00010000>;
 		};
 	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
 };

arch/powerpc/boot/dts/fsl/t104xrdb.dtsi

@@ -222,4 +222,42 @@
 				  0 0x00010000>;
 		};
 	};
+
+	qe: qe@ffe140000 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			compatible = "fsl,t1040-qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			compatible = "fsl,t1040-qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		ucc_hdlc: ucc@2000 {
+			compatible = "fsl,ucc-hdlc";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot-mask = <0xfffffffe>;
+			fsl,rx-timeslot-mask = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+			fsl,tdm-interface;
+		};
+
+		ucc_serial: ucc@2200 {
+			compatible = "fsl,t1040-ucc-uart";
+			port-number = <0>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
 };

arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi

@@ -56,6 +56,8 @@
 		pci1 = &pci1;
 		pci2 = &pci2;
 		pci3 = &pci3;
+		usb0 = &usb0;
+		usb1 = &usb1;
 		dma0 = &dma0;
 		dma1 = &dma1;
 		dma2 = &dma2;

arch/powerpc/boot/motload-head.S

+#include "ppc_asm.h"
+
+	.text
+	.globl _zimage_start
+_zimage_start:
+	mfmsr   r10
+	rlwinm  r10,r10,0,~(1<<15)        /* Clear MSR_EE */
+	sync
+	mtmsr   r10
+	isync
+	b	_zimage_start_lib

arch/powerpc/boot/mvme7100.c

+/*
+ * Motload compatibility for the Emerson/Artesyn MVME7100
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "cuboot.h"
+
+#define TARGET_86xx
+#define TARGET_HAS_ETH1
+#define TARGET_HAS_ETH2
+#define TARGET_HAS_ETH3
+#include "ppcboot.h"
+
+static bd_t bd;
+
+BSS_STACK(16384);
+
+static void mvme7100_fixups(void)
+{
+	void *devp;
+	unsigned long busfreq = bd.bi_busfreq * 1000000;
+
+	dt_fixup_cpu_clocks(bd.bi_intfreq * 1000000, busfreq / 4, busfreq);
+
+	devp = finddevice("/soc@f1000000");
+	if (devp)
+		setprop(devp, "bus-frequency", &busfreq, sizeof(busfreq));
+
+	devp = finddevice("/soc/serial@4500");
+	if (devp)
+		setprop(devp, "clock-frequency", &busfreq, sizeof(busfreq));
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+	dt_fixup_mac_address_by_alias("ethernet2", bd.bi_enet2addr);
+	dt_fixup_mac_address_by_alias("ethernet3", bd.bi_enet3addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	fdt_init(_dtb_start);
+	serial_console_init();
+	platform_ops.fixups = mvme7100_fixups;
+}

arch/powerpc/boot/ppcboot.h

@@ -43,7 +43,7 @@ typedef struct bd_info {
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
 #if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\
-	defined(TARGET_83xx)
+	defined(TARGET_83xx) || defined(TARGET_86xx)
 	unsigned long	bi_immr_base;	/* base of IMMR register */
 #endif
 #if defined(TARGET_PPC_MPC52xx)

arch/powerpc/boot/wrapper

@@ -302,6 +302,11 @@ mvme5100)
     platformo="$object/fixed-head.o $object/mvme5100.o"
     binary=y
     ;;
+mvme7100)
+    platformo="$object/motload-head.o $object/mvme7100.o"
+    link_address='0x4000000'
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"

arch/powerpc/configs/86xx-hw.config

@@ -74,9 +74,9 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=5
 CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=5
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIO_LIBPS2=y

arch/powerpc/configs/mpc86xx_basic_defconfig

@@ -8,3 +8,4 @@ CONFIG_GEF_SBC610=y
 CONFIG_MPC8610_HPCD=y
 CONFIG_MPC8641_HPCN=y
 CONFIG_SBC8641D=y
+CONFIG_MVME7100=y

arch/powerpc/configs/pq2fads_defconfig

@@ -39,7 +39,6 @@ CONFIG_MTD_CFI_I4=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
 CONFIG_NETDEVICES=y
 CONFIG_TUN=y
 CONFIG_FS_ENET=y

arch/powerpc/include/asm/accounting.h

+/*
+ * Common time accounting prototypes and such for all ppc machines.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __POWERPC_ACCOUNTING_H
+#define __POWERPC_ACCOUNTING_H
+
+/* Stuff for accurate time accounting */
+struct cpu_accounting_data {
+	unsigned long user_time;	/* accumulated usermode TB ticks */
+	unsigned long system_time;	/* accumulated system TB ticks */
+	unsigned long user_time_scaled;	/* accumulated usermode SPURR ticks */
+	unsigned long starttime;	/* TB value snapshot */
+	unsigned long starttime_user;	/* TB value on exit to usermode */
+	unsigned long startspurr;	/* SPURR value snapshot */
+	unsigned long utime_sspurr;	/* ->user_time when ->startspurr set */
+};
+
+#endif

arch/powerpc/include/asm/cputime.h

@@ -90,11 +90,10 @@ static inline void setup_cputime_one_jiffy(void)
 static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
 {
 	u64 ct;
-	u64 sec;
+	u64 sec = jif;
 
 	/* have to be a little careful about overflow */
-	ct = jif % HZ;
-	sec = jif / HZ;
+	ct = do_div(sec, HZ);
 	if (ct) {
 		ct *= tb_ticks_per_sec;
 		do_div(ct, HZ);
@@ -230,7 +229,16 @@ static inline cputime_t clock_t_to_cputime(const unsigned long clk)
 
 #define cputime64_to_clock_t(ct)	cputime_to_clock_t((cputime_t)(ct))
 
+/*
+ * PPC64 uses PACA which is task independent for storing accounting data while
+ * PPC32 uses struct thread_info, therefore at task switch the accounting data
+ * has to be populated in the new task
+ */
+#ifdef CONFIG_PPC64
 static inline void arch_vtime_task_switch(struct task_struct *tsk) { }
+#else
+void arch_vtime_task_switch(struct task_struct *tsk);
+#endif
 
 #endif /* __KERNEL__ */
 #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */

arch/powerpc/include/asm/exception-64s.h

@@ -287,7 +287,7 @@ do_kvm_##n:								\
 	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
 	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
 	beq	4f;			/* if from kernel mode		*/ \
-	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
+	ACCOUNT_CPU_USER_ENTRY(r13, r9, r10);				   \
 	SAVE_PPR(area, r9, r10);					   \
 4:	EXCEPTION_PROLOG_COMMON_2(area)					   \
 	EXCEPTION_PROLOG_COMMON_3(n)					   \

arch/powerpc/include/asm/fixmap.h

@@ -50,6 +50,13 @@ enum fixed_addresses {
 #ifdef CONFIG_HIGHMEM
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+#ifdef CONFIG_PPC_8xx
+	/* For IMMR we need an aligned 512K area */
+#define FIX_IMMR_SIZE	(512 * 1024 / PAGE_SIZE)
+	FIX_IMMR_START,
+	FIX_IMMR_BASE = __ALIGN_MASK(FIX_IMMR_START, FIX_IMMR_SIZE - 1) - 1 +
+		       FIX_IMMR_SIZE,
 #endif
 	/* FIX_PCIE_MCFG, */
 	__end_of_fixed_addresses

arch/powerpc/include/asm/mmu-8xx.h

@@ -169,6 +169,9 @@ typedef struct {
 	unsigned int active;
 	unsigned long vdso_base;
 } mm_context_t;
+
+#define PHYS_IMMR_BASE (mfspr(SPRN_IMMR) & 0xfff80000)
+#define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
 #endif /* !__ASSEMBLY__ */
 
 #if defined(CONFIG_PPC_4K_PAGES)

arch/powerpc/include/asm/paca.h

@@ -25,6 +25,7 @@
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 #include <asm/kvm_book3s_asm.h>
 #endif
+#include <asm/accounting.h>
 
 register struct paca_struct *local_paca asm("r13");
 
@@ -184,13 +185,7 @@ struct paca_struct {
 #endif
 
 	/* Stuff for accurate time accounting */
-	u64 user_time;			/* accumulated usermode TB ticks */
-	u64 system_time;		/* accumulated system TB ticks */
-	u64 user_time_scaled;		/* accumulated usermode SPURR ticks */
-	u64 starttime;			/* TB value snapshot */
-	u64 starttime_user;		/* TB value on exit to usermode */
-	u64 startspurr;			/* SPURR value snapshot */
-	u64 utime_sspurr;		/* ->user_time when ->startspurr set */
+	struct cpu_accounting_data accounting;
 	u64 stolen_time;		/* TB ticks taken by hypervisor */
 	u64 dtl_ridx;			/* read index in dispatch log */
 	struct dtl_entry *dtl_curr;	/* pointer corresponding to dtl_ridx */

arch/powerpc/include/asm/ppc_asm.h

@@ -24,27 +24,27 @@
  */
 
 #ifndef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
-#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
-#define ACCOUNT_CPU_USER_EXIT(ra, rb)
+#define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb)
+#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb)
 #define ACCOUNT_STOLEN_TIME
 #else
-#define ACCOUNT_CPU_USER_ENTRY(ra, rb)					\
+#define ACCOUNT_CPU_USER_ENTRY(ptr, ra, rb)				\
 	MFTB(ra);			/* get timebase */		\
-	ld	rb,PACA_STARTTIME_USER(r13);				\
-	std	ra,PACA_STARTTIME(r13);					\
+	PPC_LL	rb, ACCOUNT_STARTTIME_USER(ptr);			\
+	PPC_STL	ra, ACCOUNT_STARTTIME(ptr);				\
 	subf	rb,rb,ra;		/* subtract start value */	\
-	ld	ra,PACA_USER_TIME(r13);					\
+	PPC_LL	ra, ACCOUNT_USER_TIME(ptr);				\
 	add	ra,ra,rb;		/* add on to user time */	\
-	std	ra,PACA_USER_TIME(r13);					\
+	PPC_STL	ra, ACCOUNT_USER_TIME(ptr);				\
 
-#define ACCOUNT_CPU_USER_EXIT(ra, rb)					\
+#define ACCOUNT_CPU_USER_EXIT(ptr, ra, rb)				\
 	MFTB(ra);			/* get timebase */		\
-	ld	rb,PACA_STARTTIME(r13);					\
-	std	ra,PACA_STARTTIME_USER(r13);				\
+	PPC_LL	rb, ACCOUNT_STARTTIME(ptr);				\
+	PPC_STL	ra, ACCOUNT_STARTTIME_USER(ptr);			\
 	subf	rb,rb,ra;		/* subtract start value */	\
-	ld	ra,PACA_SYSTEM_TIME(r13);				\
+	PPC_LL	ra, ACCOUNT_SYSTEM_TIME(ptr);				\
 	add	ra,ra,rb;		/* add on to system time */	\
-	std	ra,PACA_SYSTEM_TIME(r13)
+	PPC_STL	ra, ACCOUNT_SYSTEM_TIME(ptr)
 
 #ifdef CONFIG_PPC_SPLPAR
 #define ACCOUNT_STOLEN_TIME						\

arch/powerpc/include/asm/reg.h

@@ -1307,6 +1307,7 @@ static inline unsigned long mfvtb (void)
 			asm volatile("mfspr %0, %1" : "=r" (rval) : \
 				"i" (SPRN_TBRU)); rval;})
 #endif
+#define mftb()		mftbl()
 #endif /* !__powerpc64__ */
 
 #define mttbl(v)	asm volatile("mttbl %0":: "r"(v))

arch/powerpc/include/asm/thread_info.h

@@ -33,6 +33,7 @@
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <linux/stringify.h>
+#include <asm/accounting.h>
 
 /*
  * low level task data.
@@ -45,6 +46,9 @@ struct thread_info {
 	unsigned long	local_flags;		/* private flags for thread */
 #ifdef CONFIG_LIVEPATCH
 	unsigned long *livepatch_sp;
+#endif
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC32)
+	struct cpu_accounting_data accounting;
 #endif
 	/* low level flags - has atomic operations done on it */
 	unsigned long	flags ____cacheline_aligned_in_smp;

arch/powerpc/kernel/asm-offsets.c

@@ -68,6 +68,10 @@
 #include "../mm/mmu_decl.h"
 #endif
 
+#ifdef CONFIG_PPC_8xx
+#include <asm/fixmap.h>
+#endif
+
 int main(void)
 {
 	DEFINE(THREAD, offsetof(struct task_struct, thread));
@@ -240,13 +244,28 @@ int main(void)
 	DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id));
 	DEFINE(PACAKEXECSTATE, offsetof(struct paca_struct, kexec_state));
 	DEFINE(PACA_DSCR_DEFAULT, offsetof(struct paca_struct, dscr_default));
-	DEFINE(PACA_STARTTIME, offsetof(struct paca_struct, starttime));
-	DEFINE(PACA_STARTTIME_USER, offsetof(struct paca_struct, starttime_user));
-	DEFINE(PACA_USER_TIME, offsetof(struct paca_struct, user_time));
-	DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time));
+	DEFINE(ACCOUNT_STARTTIME,
+	       offsetof(struct paca_struct, accounting.starttime));
+	DEFINE(ACCOUNT_STARTTIME_USER,
+	       offsetof(struct paca_struct, accounting.starttime_user));
+	DEFINE(ACCOUNT_USER_TIME,
+	       offsetof(struct paca_struct, accounting.user_time));
+	DEFINE(ACCOUNT_SYSTEM_TIME,
+	       offsetof(struct paca_struct, accounting.system_time));
 	DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save));
 	DEFINE(PACA_NAPSTATELOST, offsetof(struct paca_struct, nap_state_lost));
 	DEFINE(PACA_SPRG_VDSO, offsetof(struct paca_struct, sprg_vdso));
+#else /* CONFIG_PPC64 */
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+	DEFINE(ACCOUNT_STARTTIME,
+	       offsetof(struct thread_info, accounting.starttime));
+	DEFINE(ACCOUNT_STARTTIME_USER,
+	       offsetof(struct thread_info, accounting.starttime_user));
+	DEFINE(ACCOUNT_USER_TIME,
+	       offsetof(struct thread_info, accounting.user_time));
+	DEFINE(ACCOUNT_SYSTEM_TIME,
+	       offsetof(struct thread_info, accounting.system_time));
+#endif
 #endif /* CONFIG_PPC64 */
 
 	/* RTAS */
@@ -734,5 +753,9 @@ int main(void)
 
 	DEFINE(PPC_DBELL_SERVER, PPC_DBELL_SERVER);
 
+#ifdef CONFIG_PPC_8xx
+	DEFINE(VIRT_IMMR_BASE, (u64)__fix_to_virt(FIX_IMMR_BASE));
+#endif
+
 	return 0;
 }

arch/powerpc/kernel/entry_32.S

@@ -175,6 +175,12 @@ transfer_to_handler:
 	addi	r12,r12,-1
 	stw	r12,4(r11)
 #endif
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+	CURRENT_THREAD_INFO(r9, r1)
+	tophys(r9, r9)
+	ACCOUNT_CPU_USER_ENTRY(r9, r11, r12)
+#endif
+
 	b	3f
 
 2:	/* if from kernel, check interrupted DOZE/NAP mode and
@@ -398,6 +404,13 @@ BEGIN_FTR_SECTION
 	lwarx	r7,0,r1
 END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
 	stwcx.	r0,0,r1			/* to clear the reservation */
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+	andi.	r4,r8,MSR_PR
+	beq	3f
+	CURRENT_THREAD_INFO(r4, r1)
+	ACCOUNT_CPU_USER_EXIT(r4, r5, r7)
+3:
+#endif
 	lwz	r4,_LINK(r1)
 	lwz	r5,_CCR(r1)
 	mtlr	r4
@@ -769,6 +782,10 @@ restore_user:
 	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
+	CURRENT_THREAD_INFO(r9, r1)
+	ACCOUNT_CPU_USER_EXIT(r9, r10, r11)
+#endif
 
 	b	restore
 

arch/powerpc/kernel/entry_64.S

@@ -72,7 +72,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM)
 	std	r0,GPR0(r1)
 	std	r10,GPR1(r1)
 	beq	2f			/* if from kernel mode */
-	ACCOUNT_CPU_USER_ENTRY(r10, r11)
+	ACCOUNT_CPU_USER_ENTRY(r13, r10, r11)
 2:	std	r2,GPR2(r1)
 	std	r3,GPR3(r1)
 	mfcr	r2
@@ -246,7 +246,7 @@ END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
 	ld	r4,_LINK(r1)
 
 	beq-	1f
-	ACCOUNT_CPU_USER_EXIT(r11, r12)
+	ACCOUNT_CPU_USER_EXIT(r13, r11, r12)
 
 BEGIN_FTR_SECTION
 	HMT_MEDIUM_LOW
@@ -859,7 +859,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 BEGIN_FTR_SECTION
 	mtspr	SPRN_PPR,r2	/* Restore PPR */
 END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
-	ACCOUNT_CPU_USER_EXIT(r2, r4)
+	ACCOUNT_CPU_USER_EXIT(r13, r2, r4)
 	REST_GPR(13, r1)
 1:
 	mtspr	SPRN_SRR1,r3

arch/powerpc/kernel/exceptions-64e.S

@@ -386,7 +386,7 @@ exc_##n##_common:							    \
 	std	r10,_NIP(r1);		/* save SRR0 to stackframe */	    \
 	std	r11,_MSR(r1);		/* save SRR1 to stackframe */	    \
 	beq	2f;			/* if from kernel mode */	    \
-	ACCOUNT_CPU_USER_ENTRY(r10,r11);/* accounting (uses cr0+eq) */	    \
+	ACCOUNT_CPU_USER_ENTRY(r13,r10,r11);/* accounting (uses cr0+eq) */  \
 2:	ld	r3,excf+EX_R10(r13);	/* get back r10 */		    \
 	ld	r4,excf+EX_R11(r13);	/* get back r11 */		    \
 	mfspr	r5,scratch;		/* get back r13 */		    \
@@ -1059,7 +1059,7 @@ fast_exception_return:
 	andi.	r6,r10,MSR_PR
 	REST_2GPRS(6, r1)
 	beq	1f
-	ACCOUNT_CPU_USER_EXIT(r10, r11)
+	ACCOUNT_CPU_USER_EXIT(r13, r10, r11)
 	ld	r0,GPR13(r1)
 
 1:	stdcx.	r0,0,r1		/* to clear the reservation */

arch/powerpc/kernel/head_8xx.S

@@ -30,6 +30,7 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/ptrace.h>
+#include <asm/fixmap.h>
 
 /* Macro to make the code more readable. */
 #ifdef CONFIG_8xx_CPU6
@@ -383,28 +384,57 @@ InstructionTLBMiss:
 	EXCEPTION_EPILOG_0
 	rfi
 
+/*
+ * Bottom part of DataStoreTLBMiss handler for IMMR area
+ * not enough space in the DataStoreTLBMiss area
+ */
+DTLBMissIMMR:
+	mtcr	r10
+	/* Set 512k byte guarded page and mark it valid */
+	li	r10, MD_PS512K | MD_GUARDED | MD_SVALID
+	MTSPR_CPU6(SPRN_MD_TWC, r10, r11)
+	mfspr	r10, SPRN_IMMR			/* Get current IMMR */
+	rlwinm	r10, r10, 0, 0xfff80000		/* Get 512 kbytes boundary */
+	ori	r10, r10, 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY	| \
+			  _PAGE_PRESENT | _PAGE_NO_CACHE
+	MTSPR_CPU6(SPRN_MD_RPN, r10, r11)	/* Update TLB entry */
+
+	li	r11, RPN_PATTERN
+	mtspr	SPRN_DAR, r11	/* Tag DAR */
+	EXCEPTION_EPILOG_0
+	rfi
+
 	. = 0x1200
 DataStoreTLBMiss:
-	mtspr	SPRN_SPRG_SCRATCH2, r3
 	EXCEPTION_PROLOG_0
-	mfcr	r3
+	mfcr	r10
 
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	mfspr	r10, SPRN_MD_EPN
-	IS_KERNEL(r11, r10)
+	mfspr	r11, SPRN_MD_EPN
+	rlwinm	r11, r11, 16, 0xfff8
+#ifndef CONFIG_PIN_TLB_IMMR
+	cmpli	cr0, r11, VIRT_IMMR_BASE@h
+#endif
+	cmpli	cr7, r11, PAGE_OFFSET@h
+#ifndef CONFIG_PIN_TLB_IMMR
+_ENTRY(DTLBMiss_jmp)
+	beq-	DTLBMissIMMR
+#endif
+	bge-	cr7, 4f
+
 	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
-	BRANCH_UNLESS_KERNEL(3f)
-	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 3:
+	mtcr	r10
+#ifdef CONFIG_8xx_CPU6
+	mtspr	SPRN_SPRG_SCRATCH2, r3
+#endif
+	mfspr	r10, SPRN_MD_EPN
 
 	/* Insert level 1 index */
 	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
-	mtcr	r11
-	bt-	28,DTLBMiss8M		/* bit 28 = Large page (8M) */
-	mtcr	r3
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
@@ -452,29 +482,30 @@ DataStoreTLBMiss:
 	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
 
 	/* Restore registers */
+#ifdef CONFIG_8xx_CPU6
 	mfspr	r3, SPRN_SPRG_SCRATCH2
+#endif
 	mtspr	SPRN_DAR, r11	/* Tag DAR */
 	EXCEPTION_EPILOG_0
 	rfi
 
-DTLBMiss8M:
-	mtcr	r3
-	ori	r11, r11, MD_SVALID
-	MTSPR_CPU6(SPRN_MD_TWC, r11, r3)
-#ifdef CONFIG_PPC_16K_PAGES
-	/*
-	 * In 16k pages mode, each PGD entry defines a 64M block.
-	 * Here we select the 8M page within the block.
-	 */
-	rlwimi	r11, r10, 0, 0x03800000
-#endif
-	rlwinm	r10, r11, 0, 0xff800000
+4:
+_ENTRY(DTLBMiss_cmp)
+	cmpli	cr0, r11, (PAGE_OFFSET + 0x1800000)@h
+	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
+	bge-	3b
+
+	mtcr	r10
+	/* Set 8M byte page and mark it valid */
+	li	r10, MD_PS8MEG | MD_SVALID
+	MTSPR_CPU6(SPRN_MD_TWC, r10, r11)
+	mfspr	r10, SPRN_MD_EPN
+	rlwinm	r10, r10, 0, 0x0f800000		/* 8xx supports max 256Mb RAM */
 	ori	r10, r10, 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY	| \
 			  _PAGE_PRESENT
-	MTSPR_CPU6(SPRN_MD_RPN, r10, r3)	/* Update TLB entry */
+	MTSPR_CPU6(SPRN_MD_RPN, r10, r11)	/* Update TLB entry */
 
 	li	r11, RPN_PATTERN
-	mfspr	r3, SPRN_SPRG_SCRATCH2
 	mtspr	SPRN_DAR, r11	/* Tag DAR */
 	EXCEPTION_EPILOG_0
 	rfi
@@ -553,12 +584,14 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	IS_KERNEL(r11, r10)
 	mfspr	r11, SPRN_M_TW	/* Get level 1 table */
 	BRANCH_UNLESS_KERNEL(3f)
+	rlwinm	r11, r10, 16, 0xfff8
+_ENTRY(FixupDAR_cmp)
+	cmpli	cr7, r11, (PAGE_OFFSET + 0x1800000)@h
+	blt-	cr7, 200f
 	lis	r11, (swapper_pg_dir-PAGE_OFFSET)@ha
 	/* Insert level 1 index */
 3:	rlwimi	r11, r10, 32 - ((PAGE_SHIFT - 2) << 1), (PAGE_SHIFT - 2) << 1, 29
 	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
-	mtcr	r11
-	bt	28,200f		/* bit 28 = Large page (8M) */
 	rlwinm	r11, r11,0,0,19	/* Extract page descriptor page address */
 	/* Insert level 2 index */
 	rlwimi	r11, r10, 32 - (PAGE_SHIFT - 2), 32 - PAGE_SHIFT, 29
@@ -584,8 +617,8 @@ FixupDAR:/* Entry point for dcbx workaround. */
 141:	mfspr	r10,SPRN_SPRG_SCRATCH2
 	b	DARFixed	/* Nope, go back to normal TLB processing */
 
-	/* concat physical page address(r11) and page offset(r10) */
-200:	rlwimi	r11, r10, 0, 32 - (PAGE_SHIFT << 1), 31
+	/* create physical page address from effective address */
+200:	tophys(r11, r10)
 	b	201b
 
 144:	mfspr	r10, SPRN_DSISR
@@ -763,10 +796,18 @@ start_here:
  * virtual to physical.  Also, set the cache mode since that is defined
  * by TLB entries and perform any additional mapping (like of the IMMR).
  * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
- * 24 Mbytes of data, and the 8M IMMR space.  Anything not covered by
+ * 24 Mbytes of data, and the 512k IMMR space.  Anything not covered by
  * these mappings is mapped by page tables.
  */
 initial_mmu:
+	li	r8, 0
+	mtspr	SPRN_MI_CTR, r8		/* remove PINNED ITLB entries */
+	lis	r10, MD_RESETVAL@h
+#ifndef CONFIG_8xx_COPYBACK
+	oris	r10, r10, MD_WTDEF@h
+#endif
+	mtspr	SPRN_MD_CTR, r10	/* remove PINNED DTLB entries */
+
 	tlbia			/* Invalidate all TLB entries */
 /* Always pin the first 8 MB ITLB to prevent ITLB
    misses while mucking around with SRR0/SRR1 in asm
@@ -777,34 +818,20 @@ initial_mmu:
 	mtspr	SPRN_MI_CTR, r8	/* Set instruction MMU control */
 
 #ifdef CONFIG_PIN_TLB
-	lis	r10, (MD_RSV4I | MD_RESETVAL)@h
-	ori	r10, r10, 0x1c00
-	mr	r8, r10
-#else
-	lis	r10, MD_RESETVAL@h
-#endif
-#ifndef CONFIG_8xx_COPYBACK
-	oris	r10, r10, MD_WTDEF@h
-#endif
+	oris	r10, r10, MD_RSV4I@h
 	mtspr	SPRN_MD_CTR, r10	/* Set data TLB control */
+#endif
 
-	/* Now map the lower 8 Meg into the TLBs.  For this quick hack,
-	 * we can load the instruction and data TLB registers with the
-	 * same values.
-	 */
+	/* Now map the lower 8 Meg into the ITLB. */
 	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
 	ori	r8, r8, MI_EVALID	/* Mark it valid */
 	mtspr	SPRN_MI_EPN, r8
-	mtspr	SPRN_MD_EPN, r8
 	li	r8, MI_PS8MEG | (2 << 5)	/* Set 8M byte page, APG 2 */
 	ori	r8, r8, MI_SVALID	/* Make it valid */
 	mtspr	SPRN_MI_TWC, r8
-	li	r8, MI_PS8MEG		/* Set 8M byte page, APG 0 */
-	ori	r8, r8, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r8
 	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
 	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
-	mtspr	SPRN_MD_RPN, r8
+
 	lis	r8, MI_APG_INIT@h	/* Set protection modes */
 	ori	r8, r8, MI_APG_INIT@l
 	mtspr	SPRN_MI_AP, r8
@@ -812,51 +839,25 @@ initial_mmu:
 	ori	r8, r8, MD_APG_INIT@l
 	mtspr	SPRN_MD_AP, r8
 
-	/* Map another 8 MByte at the IMMR to get the processor
+	/* Map a 512k page for the IMMR to get the processor
 	 * internal registers (among other things).
 	 */
-#ifdef CONFIG_PIN_TLB
-	addi	r10, r10, 0x0100
+#ifdef CONFIG_PIN_TLB_IMMR
+	ori	r10, r10, 0x1c00
 	mtspr	SPRN_MD_CTR, r10
-#endif
+
 	mfspr	r9, 638			/* Get current IMMR */
-	andis.	r9, r9, 0xff80		/* Get 8Mbyte boundary */
+	andis.	r9, r9, 0xfff8		/* Get 512 kbytes boundary */
 
-	mr	r8, r9			/* Create vaddr for TLB */
+	lis	r8, VIRT_IMMR_BASE@h	/* Create vaddr for TLB */
 	ori	r8, r8, MD_EVALID	/* Mark it valid */
 	mtspr	SPRN_MD_EPN, r8
-	li	r8, MD_PS8MEG		/* Set 8M byte page */
+	li	r8, MD_PS512K | MD_GUARDED	/* Set 512k byte page */
 	ori	r8, r8, MD_SVALID	/* Make it valid */
 	mtspr	SPRN_MD_TWC, r8
 	mr	r8, r9			/* Create paddr for TLB */
 	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
 	mtspr	SPRN_MD_RPN, r8
-
-#ifdef CONFIG_PIN_TLB
-	/* Map two more 8M kernel data pages.
-	*/
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
-	addis	r8, r8, 0x0080		/* Add 8M */
-	ori	r8, r8, MI_EVALID	/* Mark it valid */
-	mtspr	SPRN_MD_EPN, r8
-	li	r9, MI_PS8MEG		/* Set 8M byte page */
-	ori	r9, r9, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r9
-	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
-
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	addis	r8, r8, 0x0080		/* Add 8M */
-	mtspr	SPRN_MD_EPN, r8
-	mtspr	SPRN_MD_TWC, r9
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
 #endif
 
 	/* Since the cache is enabled according to the information we

arch/powerpc/kernel/time.c

@@ -167,7 +167,15 @@ DEFINE_PER_CPU(unsigned long, cputime_scaled_last_delta);
 
 cputime_t cputime_one_jiffy;
 
+#ifdef CONFIG_PPC_SPLPAR
 void (*dtl_consumer)(struct dtl_entry *, u64);
+#endif
+
+#ifdef CONFIG_PPC64
+#define get_accounting(tsk)	(&get_paca()->accounting)
+#else
+#define get_accounting(tsk)	(&task_thread_info(tsk)->accounting)
+#endif
 
 static void calc_cputime_factors(void)
 {
@@ -187,7 +195,7 @@ static void calc_cputime_factors(void)
  * Read the SPURR on systems that have it, otherwise the PURR,
  * or if that doesn't exist return the timebase value passed in.
  */
-static u64 read_spurr(u64 tb)
+static unsigned long read_spurr(unsigned long tb)
 {
 	if (cpu_has_feature(CPU_FTR_SPURR))
 		return mfspr(SPRN_SPURR);
@@ -250,8 +258,8 @@ static u64 scan_dispatch_log(u64 stop_tb)
 void accumulate_stolen_time(void)
 {
 	u64 sst, ust;
-
 	u8 save_soft_enabled = local_paca->soft_enabled;
+	struct cpu_accounting_data *acct = &local_paca->accounting;
 
 	/* We are called early in the exception entry, before
 	 * soft/hard_enabled are sync'ed to the expected state
@@ -261,10 +269,10 @@ void accumulate_stolen_time(void)
 	 */
 	local_paca->soft_enabled = 0;
 
-	sst = scan_dispatch_log(local_paca->starttime_user);
-	ust = scan_dispatch_log(local_paca->starttime);
-	local_paca->system_time -= sst;
-	local_paca->user_time -= ust;
+	sst = scan_dispatch_log(acct->starttime_user);
+	ust = scan_dispatch_log(acct->starttime);
+	acct->system_time -= sst;
+	acct->user_time -= ust;
 	local_paca->stolen_time += ust + sst;
 
 	local_paca->soft_enabled = save_soft_enabled;
@@ -276,7 +284,7 @@ static inline u64 calculate_stolen_time(u64 stop_tb)
 
 	if (get_paca()->dtl_ridx != be64_to_cpu(get_lppaca()->dtl_idx)) {
 		stolen = scan_dispatch_log(stop_tb);
-		get_paca()->system_time -= stolen;
+		get_paca()->accounting.system_time -= stolen;
 	}
 
 	stolen += get_paca()->stolen_time;
@@ -296,27 +304,29 @@ static inline u64 calculate_stolen_time(u64 stop_tb)
  * Account time for a transition between system, hard irq
  * or soft irq state.
  */
-static u64 vtime_delta(struct task_struct *tsk,
-			u64 *sys_scaled, u64 *stolen)
+static unsigned long vtime_delta(struct task_struct *tsk,
+				 unsigned long *sys_scaled,
+				 unsigned long *stolen)
 {
-	u64 now, nowscaled, deltascaled;
-	u64 udelta, delta, user_scaled;
+	unsigned long now, nowscaled, deltascaled;
+	unsigned long udelta, delta, user_scaled;
+	struct cpu_accounting_data *acct = get_accounting(tsk);
 
 	WARN_ON_ONCE(!irqs_disabled());
 
 	now = mftb();
 	nowscaled = read_spurr(now);
-	get_paca()->system_time += now - get_paca()->starttime;
-	get_paca()->starttime = now;
-	deltascaled = nowscaled - get_paca()->startspurr;
-	get_paca()->startspurr = nowscaled;
+	acct->system_time += now - acct->starttime;
+	acct->starttime = now;
+	deltascaled = nowscaled - acct->startspurr;
+	acct->startspurr = nowscaled;
 
 	*stolen = calculate_stolen_time(now);
 
-	delta = get_paca()->system_time;
-	get_paca()->system_time = 0;
-	udelta = get_paca()->user_time - get_paca()->utime_sspurr;
-	get_paca()->utime_sspurr = get_paca()->user_time;
+	delta = acct->system_time;
+	acct->system_time = 0;
+	udelta = acct->user_time - acct->utime_sspurr;
+	acct->utime_sspurr = acct->user_time;
 
 	/*
 	 * Because we don't read the SPURR on every kernel entry/exit,
@@ -338,14 +348,14 @@ static u64 vtime_delta(struct task_struct *tsk,
 			*sys_scaled = deltascaled;
 		}
 	}
-	get_paca()->user_time_scaled += user_scaled;
+	acct->user_time_scaled += user_scaled;
 
 	return delta;
 }
 
 void vtime_account_system(struct task_struct *tsk)
 {
-	u64 delta, sys_scaled, stolen;
+	unsigned long delta, sys_scaled, stolen;
 
 	delta = vtime_delta(tsk, &sys_scaled, &stolen);
 	account_system_time(tsk, 0, delta, sys_scaled);
@@ -356,7 +366,7 @@ EXPORT_SYMBOL_GPL(vtime_account_system);
 
 void vtime_account_idle(struct task_struct *tsk)
 {
-	u64 delta, sys_scaled, stolen;
+	unsigned long delta, sys_scaled, stolen;
 
 	delta = vtime_delta(tsk, &sys_scaled, &stolen);
 	account_idle_time(delta + stolen);
@@ -374,15 +384,32 @@ void vtime_account_idle(struct task_struct *tsk)
 void vtime_account_user(struct task_struct *tsk)
 {
 	cputime_t utime, utimescaled;
+	struct cpu_accounting_data *acct = get_accounting(tsk);
 
-	utime = get_paca()->user_time;
-	utimescaled = get_paca()->user_time_scaled;
-	get_paca()->user_time = 0;
-	get_paca()->user_time_scaled = 0;
-	get_paca()->utime_sspurr = 0;
+	utime = acct->user_time;
+	utimescaled = acct->user_time_scaled;
+	acct->user_time = 0;
+	acct->user_time_scaled = 0;
+	acct->utime_sspurr = 0;
 	account_user_time(tsk, utime, utimescaled);
 }
 
+#ifdef CONFIG_PPC32
+/*
+ * Called from the context switch with interrupts disabled, to charge all
+ * accumulated times to the current process, and to prepare accounting on
+ * the next process.
+ */
+void arch_vtime_task_switch(struct task_struct *prev)
+{
+	struct cpu_accounting_data *acct = get_accounting(current);
+
+	acct->starttime = get_accounting(prev)->starttime;
+	acct->system_time = 0;
+	acct->user_time = 0;
+}
+#endif /* CONFIG_PPC32 */
+
 #else /* ! CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */
 #define calc_cputime_factors()
 #endif

arch/powerpc/mm/8xx_mmu.c

@@ -13,62 +13,115 @@
  */
 
 #include <linux/memblock.h>
+#include <asm/fixmap.h>
+#include <asm/code-patching.h>
 
 #include "mmu_decl.h"
 
+#define IMMR_SIZE (FIX_IMMR_SIZE << PAGE_SHIFT)
+
 extern int __map_without_ltlbs;
+
 /*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ * Return PA for this VA if it is in IMMR area, or 0
  */
-void __init MMU_init_hw(void)
+phys_addr_t v_block_mapped(unsigned long va)
 {
-	/* Nothing to do for the time being but keep it similar to other PPC */
+	unsigned long p = PHYS_IMMR_BASE;
+
+	if (__map_without_ltlbs)
+		return 0;
+	if (va >= VIRT_IMMR_BASE && va < VIRT_IMMR_BASE + IMMR_SIZE)
+		return p + va - VIRT_IMMR_BASE;
+	return 0;
+}
+
+/*
+ * Return VA for a given PA or 0 if not mapped
+ */
+unsigned long p_block_mapped(phys_addr_t pa)
+{
+	unsigned long p = PHYS_IMMR_BASE;
+
+	if (__map_without_ltlbs)
+		return 0;
+	if (pa >= p && pa < p + IMMR_SIZE)
+		return VIRT_IMMR_BASE + pa - p;
+	return 0;
 }
 
-#define LARGE_PAGE_SIZE_4M	(1<<22)
 #define LARGE_PAGE_SIZE_8M	(1<<23)
-#define LARGE_PAGE_SIZE_64M	(1<<26)
 
-unsigned long __init mmu_mapin_ram(unsigned long top)
+/*
+ * MMU_init_hw does the chip-specific initialization of the MMU hardware.
+ */
+void __init MMU_init_hw(void)
 {
-	unsigned long v, s, mapped;
-	phys_addr_t p;
+	/* PIN up to the 3 first 8Mb after IMMR in DTLB table */
+#ifdef CONFIG_PIN_TLB
+	unsigned long ctr = mfspr(SPRN_MD_CTR) & 0xfe000000;
+	unsigned long flags = 0xf0 | MD_SPS16K | _PAGE_SHARED | _PAGE_DIRTY;
+#ifdef CONFIG_PIN_TLB_IMMR
+	int i = 29;
+#else
+	int i = 28;
+#endif
+	unsigned long addr = 0;
+	unsigned long mem = total_lowmem;
+
+	for (; i < 32 && mem >= LARGE_PAGE_SIZE_8M; i++) {
+		mtspr(SPRN_MD_CTR, ctr | (i << 8));
+		mtspr(SPRN_MD_EPN, (unsigned long)__va(addr) | MD_EVALID);
+		mtspr(SPRN_MD_TWC, MD_PS8MEG | MD_SVALID);
+		mtspr(SPRN_MD_RPN, addr | flags | _PAGE_PRESENT);
+		addr += LARGE_PAGE_SIZE_8M;
+		mem -= LARGE_PAGE_SIZE_8M;
+	}
+#endif
+}
 
-	v = KERNELBASE;
-	p = 0;
-	s = top;
+static void mmu_mapin_immr(void)
+{
+	unsigned long p = PHYS_IMMR_BASE;
+	unsigned long v = VIRT_IMMR_BASE;
+	unsigned long f = pgprot_val(PAGE_KERNEL_NCG);
+	int offset;
 
-	if (__map_without_ltlbs)
-		return 0;
+	for (offset = 0; offset < IMMR_SIZE; offset += PAGE_SIZE)
+		map_page(v + offset, p + offset, f);
+}
 
-#ifdef CONFIG_PPC_4K_PAGES
-	while (s >= LARGE_PAGE_SIZE_8M) {
-		pmd_t *pmdp;
-		unsigned long val = p | MD_PS8MEG;
+/* Address of instructions to patch */
+#ifndef CONFIG_PIN_TLB_IMMR
+extern unsigned int DTLBMiss_jmp;
+#endif
+extern unsigned int DTLBMiss_cmp, FixupDAR_cmp;
 
-		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
-		*pmdp++ = __pmd(val);
-		*pmdp++ = __pmd(val + LARGE_PAGE_SIZE_4M);
+void mmu_patch_cmp_limit(unsigned int *addr, unsigned long mapped)
+{
+	unsigned int instr = *addr;
 
-		v += LARGE_PAGE_SIZE_8M;
-		p += LARGE_PAGE_SIZE_8M;
-		s -= LARGE_PAGE_SIZE_8M;
-	}
-#else /* CONFIG_PPC_16K_PAGES */
-	while (s >= LARGE_PAGE_SIZE_64M) {
-		pmd_t *pmdp;
-		unsigned long val = p | MD_PS8MEG;
+	instr &= 0xffff0000;
+	instr |= (unsigned long)__va(mapped) >> 16;
+	patch_instruction(addr, instr);
+}
 
-		pmdp = pmd_offset(pud_offset(pgd_offset_k(v), v), v);
-		*pmdp++ = __pmd(val);
+unsigned long __init mmu_mapin_ram(unsigned long top)
+{
+	unsigned long mapped;
 
-		v += LARGE_PAGE_SIZE_64M;
-		p += LARGE_PAGE_SIZE_64M;
-		s -= LARGE_PAGE_SIZE_64M;
-	}
+	if (__map_without_ltlbs) {
+		mapped = 0;
+		mmu_mapin_immr();
+#ifndef CONFIG_PIN_TLB_IMMR
+		patch_instruction(&DTLBMiss_jmp, PPC_INST_NOP);
 #endif
+	} else {
+		mapped = top & ~(LARGE_PAGE_SIZE_8M - 1);
+	}
 
-	mapped = top - s;
+	mmu_patch_cmp_limit(&DTLBMiss_cmp, mapped);
+	mmu_patch_cmp_limit(&FixupDAR_cmp, mapped);
 
 	/* If the size of RAM is not an exact power of two, we may not
 	 * have covered RAM in its entirety with 8 MiB
@@ -77,7 +130,8 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 	 * coverage with normal-sized pages (or other reasons) do not
 	 * attempt to allocate outside the allowed range.
 	 */
-	memblock_set_current_limit(mapped);
+	if (mapped)
+		memblock_set_current_limit(mapped);
 
 	return mapped;
 }
@@ -90,13 +144,8 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	 */
 	BUG_ON(first_memblock_base != 0);
 
-#ifdef CONFIG_PIN_TLB
 	/* 8xx can only access 24MB at the moment */
 	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x01800000));
-#else
-	/* 8xx can only access 8MB at the moment */
-	memblock_set_current_limit(min_t(u64, first_memblock_size, 0x00800000));
-#endif
 }
 
 /*

arch/powerpc/mm/mmu_decl.h

@@ -154,9 +154,10 @@ struct tlbcam {
 };
 #endif
 
-#if defined(CONFIG_6xx) || defined(CONFIG_FSL_BOOKE)
+#if defined(CONFIG_6xx) || defined(CONFIG_FSL_BOOKE) || defined(CONFIG_PPC_8xx)
 /* 6xx have BATS */
 /* FSL_BOOKE have TLBCAM */
+/* 8xx have LTLB */
 phys_addr_t v_block_mapped(unsigned long va);
 unsigned long p_block_mapped(phys_addr_t pa);
 #else

arch/powerpc/platforms/86xx/Kconfig

@@ -61,6 +61,11 @@ config GEF_SBC610
 	help
 	  This option enables support for the GE SBC610.
 
+config MVME7100
+        bool "Artesyn MVME7100"
+        help
+          This option enables support for the Emerson/Artesyn MVME7100 board.
+
 endif
 
 config MPC8641
@@ -69,7 +74,8 @@ config MPC8641
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
-	default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A
+	default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 || GEF_PPC9A \
+			|| MVME7100
 
 config MPC8610
 	bool

arch/powerpc/platforms/86xx/Makefile

@@ -10,3 +10,4 @@ obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
 obj-$(CONFIG_GEF_SBC610)	+= gef_sbc610.o
 obj-$(CONFIG_GEF_SBC310)	+= gef_sbc310.o
 obj-$(CONFIG_GEF_PPC9A)		+= gef_ppc9a.o
+obj-$(CONFIG_MVME7100)          += mvme7100.o

arch/powerpc/platforms/86xx/mvme7100.c

+/*
+ * Board setup routines for the Emerson/Artesyn MVME7100
+ *
+ * Copyright 2016 Elettra-Sincrotrone Trieste S.C.p.A.
+ *
+ * Author: Alessio Igor Bogani <alessio.bogani@elettra.eu>
+ *
+ * Based on earlier code by:
+ *
+ *	Ajit Prem <ajit.prem@emerson.com>
+ *	Copyright 2008 Emerson
+ *
+ * USB host fixup is borrowed by:
+ *
+ *	Martyn Welch <martyn.welch@ge.com>
+ *	Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc86xx.h"
+
+#define MVME7100_INTERRUPT_REG_2_OFFSET	0x05
+#define MVME7100_DS1375_MASK		0x40
+#define MVME7100_MAX6649_MASK		0x20
+#define MVME7100_ABORT_MASK		0x10
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme7100_setup_arch(void)
+{
+	struct device_node *bcsr_node;
+	void __iomem *mvme7100_regs = NULL;
+	u8 reg;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mvme7100_setup_arch()", 0);
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+
+	fsl_pci_assign_primary();
+
+	/* Remap BCSR registers */
+	bcsr_node = of_find_compatible_node(NULL, NULL,
+			"artesyn,mvme7100-bcsr");
+	if (bcsr_node) {
+		mvme7100_regs = of_iomap(bcsr_node, 0);
+		of_node_put(bcsr_node);
+	}
+
+	if (mvme7100_regs) {
+		/* Disable ds1375, max6649, and abort interrupts */
+		reg = readb(mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
+		reg |= MVME7100_DS1375_MASK | MVME7100_MAX6649_MASK
+			| MVME7100_ABORT_MASK;
+		writeb(reg, mvme7100_regs + MVME7100_INTERRUPT_REG_2_OFFSET);
+	} else
+		pr_warn("Unable to map board registers\n");
+
+	pr_info("MVME7100 board from Artesyn\n");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme7100_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "artesyn,MVME7100");
+}
+
+static void mvme7100_usb_host_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	if (!machine_is(mvme7100))
+		return;
+
+	/* Ensure only ports 1 & 2 are enabled */
+	pci_read_config_dword(pdev, 0xe0, &val);
+	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2);
+
+	/* System clock is 48-MHz Oscillator and EHCI Enabled. */
+	pci_write_config_dword(pdev, 0xe4, 1 << 5);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
+	mvme7100_usb_host_fixup);
+
+machine_arch_initcall(mvme7100, mpc86xx_common_publish_devices);
+
+define_machine(mvme7100) {
+	.name			= "MVME7100",
+	.probe			= mvme7100_probe,
+	.setup_arch		= mvme7100_setup_arch,
+	.init_IRQ		= mpc86xx_init_irq,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.time_init		= mpc86xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};

arch/powerpc/platforms/Kconfig.cputype

 config PPC64
 	bool "64-bit kernel"
 	default n
-	select HAVE_VIRT_CPU_ACCOUNTING
 	select ZLIB_DEFLATE
 	help
 	  This option selects whether a 32-bit or a 64-bit kernel

arch/powerpc/sysdev/cpm_common.c

@@ -28,6 +28,7 @@
 #include <asm/udbg.h>
 #include <asm/io.h>
 #include <asm/cpm.h>
+#include <asm/fixmap.h>
 #include <soc/fsl/qe/qe.h>
 
 #include <mm/mmu_decl.h>
@@ -37,25 +38,36 @@
 #endif
 
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
-static u32 __iomem *cpm_udbg_txdesc =
-	(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
+static u32 __iomem *cpm_udbg_txdesc;
+static u8 __iomem *cpm_udbg_txbuf;
 
 static void udbg_putc_cpm(char c)
 {
-	u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
-
 	if (c == '\n')
 		udbg_putc_cpm('\r');
 
 	while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000)
 		;
 
-	out_8(txbuf, c);
+	out_8(cpm_udbg_txbuf, c);
 	out_be32(&cpm_udbg_txdesc[0], 0xa0000001);
 }
 
 void __init udbg_init_cpm(void)
 {
+#ifdef CONFIG_PPC_8xx
+	cpm_udbg_txdesc = (u32 __iomem __force *)
+			  (CONFIG_PPC_EARLY_DEBUG_CPM_ADDR - PHYS_IMMR_BASE +
+			   VIRT_IMMR_BASE);
+	cpm_udbg_txbuf = (u8 __iomem __force *)
+			 (in_be32(&cpm_udbg_txdesc[1]) - PHYS_IMMR_BASE +
+			  VIRT_IMMR_BASE);
+#else
+	cpm_udbg_txdesc = (u32 __iomem __force *)
+			  CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
+	cpm_udbg_txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
+#endif
+
 	if (cpm_udbg_txdesc) {
 #ifdef CONFIG_CPM2
 		setbat(1, 0xf0000000, 0xf0000000, 1024*1024, PAGE_KERNEL_NCG);

arch/powerpc/sysdev/fsl_85xx_l2ctlr.c

@@ -90,12 +90,8 @@ static int mpc85xx_l2ctlr_of_probe(struct platform_device *dev)
 	}
 	l2cache_size = *prop;
 
-	if (get_cache_sram_params(&sram_params)) {
-		dev_err(&dev->dev,
-			"Entire L2 as cache, provide valid sram offset and size\n");
-		return -EINVAL;
-	}
-
+	if (get_cache_sram_params(&sram_params))
+		return 0; /* fall back to L2 cache only */
 
 	rem = l2cache_size % sram_params.sram_size;
 	ways = LOCK_WAYS_FULL * sram_params.sram_size / l2cache_size;

arch/powerpc/xmon/xmon.c

@@ -2284,13 +2284,13 @@ static void dump_one_paca(int cpu)
 	DUMP(p, subcore_sibling_mask, "x");
 #endif
 
-	DUMP(p, user_time, "llx");
-	DUMP(p, system_time, "llx");
-	DUMP(p, user_time_scaled, "llx");
-	DUMP(p, starttime, "llx");
-	DUMP(p, starttime_user, "llx");
-	DUMP(p, startspurr, "llx");
-	DUMP(p, utime_sspurr, "llx");
+	DUMP(p, accounting.user_time, "llx");
+	DUMP(p, accounting.system_time, "llx");
+	DUMP(p, accounting.user_time_scaled, "llx");
+	DUMP(p, accounting.starttime, "llx");
+	DUMP(p, accounting.starttime_user, "llx");
+	DUMP(p, accounting.startspurr, "llx");
+	DUMP(p, accounting.utime_sspurr, "llx");
 	DUMP(p, stolen_time, "llx");
 #undef DUMP