提交 7183dc29 编写于 作者: J Jesse Barnes 提交者: Keith Packard

drm/i915/dp: use DP DPCD defines when looking at DPCD values

Makes it easier to search for DP related constants.
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>
上级 61da5fab
......@@ -138,8 +138,8 @@ intel_dp_max_lane_count(struct intel_dp *intel_dp)
{
int max_lane_count = 4;
if (intel_dp->dpcd[0] >= 0x11) {
max_lane_count = intel_dp->dpcd[2] & 0x1f;
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) {
max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f;
switch (max_lane_count) {
case 1: case 2: case 4:
break;
......@@ -153,7 +153,7 @@ intel_dp_max_lane_count(struct intel_dp *intel_dp)
static int
intel_dp_max_link_bw(struct intel_dp *intel_dp)
{
int max_link_bw = intel_dp->dpcd[1];
int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE];
switch (max_link_bw) {
case DP_LINK_BW_1_62:
......@@ -774,7 +774,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
/*
* Check for DPCD version > 1.1 and enhanced framing support
*/
if (intel_dp->dpcd[0] >= 0x11 && (intel_dp->dpcd[2] & DP_ENHANCED_FRAME_CAP)) {
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 &&
(intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) {
intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
intel_dp->DP |= DP_ENHANCED_FRAMING;
}
......@@ -1553,7 +1554,7 @@ ironlake_dp_detect(struct intel_dp *intel_dp)
0x000, intel_dp->dpcd,
sizeof (intel_dp->dpcd))
== sizeof(intel_dp->dpcd)) {
if (intel_dp->dpcd[0] != 0)
if (intel_dp->dpcd[DP_DPCD_REV] != 0)
status = connector_status_connected;
}
DRM_DEBUG_KMS("DPCD: %hx%hx%hx%hx\n", intel_dp->dpcd[0],
......@@ -1592,7 +1593,7 @@ g4x_dp_detect(struct intel_dp *intel_dp)
if (intel_dp_aux_native_read(intel_dp, 0x000, intel_dp->dpcd,
sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd))
{
if (intel_dp->dpcd[0] != 0)
if (intel_dp->dpcd[DP_DPCD_REV] != 0)
status = connector_status_connected;
}
......@@ -1960,8 +1961,9 @@ intel_dp_init(struct drm_device *dev, int output_reg)
sizeof(intel_dp->dpcd));
ironlake_edp_panel_vdd_off(intel_dp);
if (ret == sizeof(intel_dp->dpcd)) {
if (intel_dp->dpcd[0] >= 0x11)
dev_priv->no_aux_handshake = intel_dp->dpcd[3] &
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11)
dev_priv->no_aux_handshake =
intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
DP_NO_AUX_HANDSHAKE_LINK_TRAINING;
} else {
/* if this fails, presume the device is a ghost */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册