USB: spcp8x5: correct handling of CS5 setting

This patch removes an erroneous check of CSIZE, which made it impossible to set
CS5.

Compiles clean, but couldn't test against hardware.
Signed-off-by: NColin Leitner <colin.leitner@gmail.com>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/serial/spcp8x5.c

@@ -348,22 +348,20 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	}
 
 	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
-	if (cflag & CSIZE) {
-		switch (cflag & CSIZE) {
-		case CS5:
-			buf[1] |= SET_UART_FORMAT_SIZE_5;
-			break;
-		case CS6:
-			buf[1] |= SET_UART_FORMAT_SIZE_6;
-			break;
-		case CS7:
-			buf[1] |= SET_UART_FORMAT_SIZE_7;
-			break;
-		default:
-		case CS8:
-			buf[1] |= SET_UART_FORMAT_SIZE_8;
-			break;
-		}
+	switch (cflag & CSIZE) {
+	case CS5:
+		buf[1] |= SET_UART_FORMAT_SIZE_5;
+		break;
+	case CS6:
+		buf[1] |= SET_UART_FORMAT_SIZE_6;
+		break;
+	case CS7:
+		buf[1] |= SET_UART_FORMAT_SIZE_7;
+		break;
+	default:
+	case CS8:
+		buf[1] |= SET_UART_FORMAT_SIZE_8;
+		break;
 	}
 
 	/* Set Stop bit2 : 0:1bit 1:2bit */