提交 70e3f3d4 编写于 作者: K Kuninori Morimoto 提交者: Simon Horman

ARM: shmobile: r8a7740: move r8a7740_init_irq_of() to setup

This patch moves r8a7740_init_irq_of() to setup code,
and remove intc-r8a7740
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
上级 8c23c7ca
......@@ -9,7 +9,7 @@ obj-y := timer.o console.o clock.o
obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o
......
/*
* R8A7740 processor support
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
void __init r8a7740_init_irq_of(void)
{
void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
irqchip_init();
/* route signals to GIC */
iowrite32(0x0, pfc_inta_ctrl);
/*
* To mask the shared interrupt to SPI 149 we must ensure to set
* PRIO *and* MASK. Else we run into IRQ floods when registering
* the intc_irqpin devices
*/
iowrite32(0x0, intc_prio_base + 0x0);
iowrite32(0x0, intc_prio_base + 0x4);
iowrite32(0x0, intc_prio_base + 0x8);
iowrite32(0x0, intc_prio_base + 0xc);
iowrite8(0xff, intc_msk_base + 0x0);
iowrite8(0xff, intc_msk_base + 0x4);
iowrite8(0xff, intc_msk_base + 0x8);
iowrite8(0xff, intc_msk_base + 0xc);
iounmap(intc_prio_base);
iounmap(intc_msk_base);
iounmap(pfc_inta_ctrl);
}
......@@ -22,6 +22,8 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
......@@ -1019,6 +1021,36 @@ void __init r8a7740_init_delay(void)
shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
};
void __init r8a7740_init_irq_of(void)
{
void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10);
void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);
irqchip_init();
/* route signals to GIC */
iowrite32(0x0, pfc_inta_ctrl);
/*
* To mask the shared interrupt to SPI 149 we must ensure to set
* PRIO *and* MASK. Else we run into IRQ floods when registering
* the intc_irqpin devices
*/
iowrite32(0x0, intc_prio_base + 0x0);
iowrite32(0x0, intc_prio_base + 0x4);
iowrite32(0x0, intc_prio_base + 0x8);
iowrite32(0x0, intc_prio_base + 0xc);
iowrite8(0xff, intc_msk_base + 0x0);
iowrite8(0xff, intc_msk_base + 0x4);
iowrite8(0xff, intc_msk_base + 0x8);
iowrite8(0xff, intc_msk_base + 0xc);
iounmap(intc_prio_base);
iounmap(intc_msk_base);
iounmap(pfc_inta_ctrl);
}
static void __init r8a7740_generic_init(void)
{
r8a7740_clock_init(0);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册