ARM: OMAP1: Make plat/mux.h omap1 only

We are moving omap2+ to use the device tree based pinctrl-single.c
and will be removing the old mux framework. This will remove the
omap1 specific parts from plat-omap.
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Cc: spi-devel-general@lists.sourceforge.net
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-ams-delta.c

@@ -37,7 +37,7 @@
 
 #include <plat/board-ams-delta.h>
 #include <linux/platform_data/keypad-omap.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>

arch/arm/mach-omap1/board-fsample.c

@@ -28,7 +28,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <linux/platform_data/keypad-omap.h>

arch/arm/mach-omap1/board-generic.c

@@ -22,7 +22,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>
 

arch/arm/mach-omap1/board-h2.c

@@ -37,7 +37,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/irda.h>

arch/arm/mach-omap1/board-h3.c

@@ -39,7 +39,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <linux/platform_data/keypad-omap.h>
 #include <plat/dma.h>

arch/arm/mach-omap1/board-innovator.c

@@ -31,7 +31,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/tc.h>

arch/arm/mach-omap1/board-nokia770.c

@@ -28,7 +28,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
 

arch/arm/mach-omap1/board-osk.c

@@ -47,7 +47,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap1/board-palmte.c

@@ -35,7 +35,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
 #include <plat/irda.h>

arch/arm/mach-omap1/board-palmtt.c

@@ -35,7 +35,7 @@
 
 #include <plat/led.h>
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/irda.h>

arch/arm/mach-omap1/board-palmz71.c

@@ -37,7 +37,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
 #include <plat/irda.h>

arch/arm/mach-omap1/board-perseus2.c

@@ -29,7 +29,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
 #include <plat/flash.h>
 

arch/arm/mach-omap1/board-sx1.c

@@ -35,7 +35,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/irda.h>
 #include <plat/tc.h>

arch/arm/mach-omap1/board-voiceblue.c

@@ -33,7 +33,7 @@
 
 #include <plat/board-voiceblue.h>
 #include <plat/flash.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 
 #include <mach/hardware.h>

arch/arm/mach-omap1/devices.c

@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/mmc.h>
 

arch/arm/mach-omap1/i2c.c

@@ -20,7 +20,7 @@
  */
 
 #include <plat/i2c.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/cpu.h>
 
 void __init omap1_i2c_mux_pins(int bus_id)

arch/arm/mach-omap1/io.c

@@ -16,7 +16,7 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
 

arch/arm/mach-omap1/leds.c

@@ -11,7 +11,7 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include "leds.h"
 

arch/arm/mach-omap1/mcbsp.c

@@ -20,7 +20,7 @@
 #include <linux/slab.h>
 
 #include <plat/dma.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 

arch/arm/mach-omap1/mux.c

@@ -29,7 +29,7 @@
 
 #include <mach/hardware.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
@@ -451,6 +451,56 @@ static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 #endif
 }
 
+static struct omap_mux_cfg *mux_cfg;
+
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
+{
+	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+			|| !arch_mux_cfg->cfg_reg) {
+		printk(KERN_ERR "Invalid pin table\n");
+		return -EINVAL;
+	}
+
+	mux_cfg = arch_mux_cfg;
+
+	return 0;
+}
+
+/*
+ * Sets the Omap MUX and PULL_DWN registers based on the table
+ */
+int __init_or_module omap_cfg_reg(const unsigned long index)
+{
+	struct pin_config *reg;
+
+	if (!cpu_class_is_omap1()) {
+		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+				index);
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (mux_cfg == NULL) {
+		printk(KERN_ERR "Pin mux table not initialized\n");
+		return -ENODEV;
+	}
+
+	if (index >= mux_cfg->size) {
+		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+		       index, mux_cfg->size);
+		dump_stack();
+		return -ENODEV;
+	}
+
+	reg = &mux_cfg->pins[index];
+
+	if (!mux_cfg->cfg_reg)
+		return -ENODEV;
+
+	return mux_cfg->cfg_reg(reg);
+}
+EXPORT_SYMBOL(omap_cfg_reg);
+
 int __init omap1_mux_init(void)
 {
 	if (cpu_is_omap7xx()) {
@@ -468,4 +518,8 @@ int __init omap1_mux_init(void)
 	return omap_mux_register(&arch_mux_cfg);
 }
 
-#endif
+#else
+#define omap_mux_init() do {} while(0)
+#define omap_cfg_reg(x)	do {} while(0)
+#endif	/* CONFIG_OMAP_MUX */
+

arch/arm/mach-omap1/pm.c

@@ -53,7 +53,7 @@
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/tc.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 

arch/arm/mach-omap1/serial.c

@@ -22,7 +22,7 @@
 
 #include <asm/mach-types.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
 
 #include "pm.h"

arch/arm/mach-omap1/usb.c

@@ -26,7 +26,7 @@
 
 #include <asm/irq.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>
 

arch/arm/mach-omap2/common.c

@@ -17,7 +17,6 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <plat/mux.h>
 #include <plat/clock.h>
 
 #include "soc.h"

arch/arm/mach-omap2/hsmmc.c

@@ -19,7 +19,6 @@
 
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
-#include <plat/mux.h>
 #include <plat/omap_device.h>
 
 #include "mux.h"

arch/arm/plat-omap/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o sram.o clock.o dma.o mux.o fb.o counter_32k.o
+obj-y := common.o sram.o clock.o dma.o fb.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=

arch/arm/plat-omap/i2c.c

@@ -32,7 +32,6 @@
 #include <linux/clk.h>
 
 #include <mach/irqs.h>
-#include <plat/mux.h>
 #include <plat/i2c.h>
 #include <plat/omap-pm.h>
 #include <plat/omap_device.h>

arch/arm/plat-omap/include/plat/omap-serial.h

@@ -21,8 +21,6 @@
 #include <linux/device.h>
 #include <linux/pm_qos.h>
 
-#include <plat/mux.h>
-
 #define DRIVER_NAME	"omap_uart"
 
 /*

arch/arm/plat-omap/mux.c

-/*
- * linux/arch/arm/plat-omap/mux.c
- *
- * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
- *
- * Copyright (C) 2003 - 2008 Nokia Corporation
- *
- * Written by Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-#include <asm/system.h>
-
-#include <plat/cpu.h>
-#include <plat/mux.h>
-
-#ifdef CONFIG_OMAP_MUX
-
-static struct omap_mux_cfg *mux_cfg;
-
-int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
-{
-	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
-			|| !arch_mux_cfg->cfg_reg) {
-		printk(KERN_ERR "Invalid pin table\n");
-		return -EINVAL;
-	}
-
-	mux_cfg = arch_mux_cfg;
-
-	return 0;
-}
-
-/*
- * Sets the Omap MUX and PULL_DWN registers based on the table
- */
-int __init_or_module omap_cfg_reg(const unsigned long index)
-{
-	struct pin_config *reg;
-
-	if (!cpu_class_is_omap1()) {
-		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
-				index);
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	if (mux_cfg == NULL) {
-		printk(KERN_ERR "Pin mux table not initialized\n");
-		return -ENODEV;
-	}
-
-	if (index >= mux_cfg->size) {
-		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, mux_cfg->size);
-		dump_stack();
-		return -ENODEV;
-	}
-
-	reg = &mux_cfg->pins[index];
-
-	if (!mux_cfg->cfg_reg)
-		return -ENODEV;
-
-	return mux_cfg->cfg_reg(reg);
-}
-EXPORT_SYMBOL(omap_cfg_reg);
-#else
-#define omap_mux_init() do {} while(0)
-#define omap_cfg_reg(x)	do {} while(0)
-#endif	/* CONFIG_OMAP_MUX */

drivers/mmc/host/omap.c

@@ -36,7 +36,6 @@
 #include <plat/mmc.h>
 #include <asm/gpio.h>
 #include <plat/dma.h>
-#include <plat/mux.h>
 #include <plat/fpga.h>
 
 #define	OMAP_MMC_REG_CMD	0x00

drivers/pcmcia/omap_cf.c

@@ -24,7 +24,7 @@
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/tc.h>
 
 

drivers/spi/spi-omap-uwire.c

@@ -52,7 +52,7 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/omap7xx.h>	/* OMAP7XX_IO_CONF registers */
 

drivers/usb/host/ohci-omap.c

@@ -24,7 +24,7 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include <plat/fpga.h>
 
 #include <mach/hardware.h>

drivers/usb/musb/tusb6010_omap.c

@@ -17,7 +17,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/slab.h>
 #include <plat/dma.h>
-#include <plat/mux.h>
 
 #include "musb_core.h"
 #include "tusb6010.h"

drivers/usb/otg/isp1301_omap.c

@@ -36,7 +36,7 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #include <mach/usb.h>
 

drivers/video/backlight/omap1_bl.c

@@ -30,7 +30,7 @@
 #include <linux/platform_data/omap1_bl.h>
 
 #include <mach/hardware.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 
 #define OMAPBL_MAX_INTENSITY		0xff
 

drivers/video/omap/lcd_osk.c

@@ -24,7 +24,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/gpio.h>
-#include <plat/mux.h>
+#include <mach/mux.h>
 #include "omapfb.h"
 
 static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)