[media] af9035: change dual mode boolean to bit field

For some reason there seems to be value	0x03 in eeprom for dual mode
(and 0x00 for single mode). Boolean is not always 1 bit wide - it
could be 8 bit wide too. Storing number 0x03 to boolean causes driver
to thing there is 4 tuners in some cases :o
Add also some comments regarding to eeprom.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/usb/dvb-usb-v2/af9035.h

@@ -59,7 +59,7 @@ struct state {
 	u8 prechip_version;
 	u8 chip_version;
 	u16 chip_type;
-	bool dual_mode;
+	u8 dual_mode:1;
 	u16 eeprom_addr;
 	struct af9033_config af9033_config[2];
 };
@@ -96,6 +96,14 @@ static const u32 clock_lut_it9135[] = {
 #define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw"
 #define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw"
 
+/*
+ * eeprom is memory mapped as read only. Writing that memory mapped address
+ * will not corrupt eeprom.
+ *
+ * eeprom has value 0x00 single mode and 0x03 for dual mode as far as I have
+ * seen to this day.
+ */
+
 #define EEPROM_BASE_AF9035        0x42fd
 #define EEPROM_BASE_IT9135        0x499c
 #define EEPROM_SHIFT                0x10