提交 7002a4f3 编写于 作者: D Douglas Landgraf 提交者: Mauro Carvalho Chehab

V4L/DVB (5623): Dsbr100.c Replace usb_dsbr100_do_ioctl to use video_ioctl2

Convert dsbr100 to use video_ioctl2
Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
上级 2437c6d4
......@@ -33,6 +33,10 @@
History:
Version 0.42:
Converted dsbr100 to use video_ioctl2
by Douglas Landgraf <dougsland@gmail.com>
Version 0.41-ac1:
Alan Cox: Some cleanups and fixes
......@@ -121,8 +125,6 @@ devices, that would be 76 and 91. */
static int usb_dsbr100_probe(struct usb_interface *intf,
const struct usb_device_id *id);
static void usb_dsbr100_disconnect(struct usb_interface *intf);
static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg);
static int usb_dsbr100_open(struct inode *inode, struct file *file);
static int usb_dsbr100_close(struct inode *inode, struct file *file);
......@@ -142,26 +144,6 @@ struct dsbr100_device {
};
/* File system interface */
static const struct file_operations usb_dsbr100_fops = {
.owner = THIS_MODULE,
.open = usb_dsbr100_open,
.release = usb_dsbr100_close,
.ioctl = usb_dsbr100_ioctl,
.compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
};
/* V4L interface */
static struct video_device dsbr100_videodev_template=
{
.owner = THIS_MODULE,
.name = "D-Link DSB-R 100",
.type = VID_TYPE_TUNER,
.fops = &usb_dsbr100_fops,
.release = video_device_release,
};
static struct usb_device_id usb_dsbr100_device_table [] = {
{ USB_DEVICE(DSB100_VENDOR, DSB100_PRODUCT) },
{ } /* Terminating entry */
......@@ -252,37 +234,6 @@ static void dsbr100_getstat(struct dsbr100_device *radio)
/* USB subsystem interface begins here */
/* check if the device is present and register with v4l and
usb if it is */
static int usb_dsbr100_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct dsbr100_device *radio;
if (!(radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL)))
return -ENOMEM;
if (!(radio->videodev = video_device_alloc())) {
kfree(radio);
return -ENOMEM;
}
memcpy(radio->videodev, &dsbr100_videodev_template,
sizeof(dsbr100_videodev_template));
radio->removed = 0;
radio->users = 0;
radio->usbdev = interface_to_usbdev(intf);
radio->curfreq = FREQ_MIN*FREQ_MUL;
video_set_drvdata(radio->videodev, radio);
if (video_register_device(radio->videodev, VFL_TYPE_RADIO,
radio_nr)) {
warn("Could not register video device");
video_device_release(radio->videodev);
kfree(radio);
return -EIO;
}
usb_set_intfdata(intf, radio);
return 0;
}
/* handle unplugging of the device, release data structures
if nothing keeps us from doing it. If something is still
keeping us busy, the release callback of v4l will take care
......@@ -307,133 +258,147 @@ static void usb_dsbr100_disconnect(struct usb_interface *intf)
}
/* Video for Linux interface */
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
strlcpy(v->driver, "dsbr100", sizeof(v->driver));
strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card));
sprintf(v->bus_info, "ISA");
v->version = RADIO_VERSION;
v->capabilities = V4L2_CAP_TUNER;
return 0;
}
static int usb_dsbr100_do_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, void *arg)
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
struct dsbr100_device *radio=video_get_drvdata(video_devdata(file));
struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
if (v->index > 0)
return -EINVAL;
dsbr100_getstat(radio);
strcpy(v->name, "FM");
v->type = V4L2_TUNER_RADIO;
v->rangelow = FREQ_MIN*FREQ_MUL;
v->rangehigh = FREQ_MAX*FREQ_MUL;
v->rxsubchans = V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO;
v->capability = V4L2_TUNER_CAP_LOW;
if(radio->stereo)
v->audmode = V4L2_TUNER_MODE_STEREO;
else
v->audmode = V4L2_TUNER_MODE_MONO;
v->signal = 0xffff; /* We can't get the signal strength */
return 0;
}
if (!radio)
return -EIO;
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
if (v->index > 0)
return -EINVAL;
switch(cmd) {
case VIDIOC_QUERYCAP:
{
struct v4l2_capability *v = arg;
memset(v,0,sizeof(*v));
strlcpy(v->driver, "dsbr100", sizeof (v->driver));
strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof (v->card));
sprintf(v->bus_info,"ISA");
v->version = RADIO_VERSION;
v->capabilities = V4L2_CAP_TUNER;
return 0;
}
return 0;
}
case VIDIOC_G_TUNER:
{
struct v4l2_tuner *v = arg;
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
if (v->index > 0)
return -EINVAL;
radio->curfreq = f->frequency;
if (dsbr100_setfreq(radio, radio->curfreq)==-1)
warn("Set frequency failed");
return 0;
}
dsbr100_getstat(radio);
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
memset(v,0,sizeof(*v));
strcpy(v->name, "FM");
v->type = V4L2_TUNER_RADIO;
f->type = V4L2_TUNER_RADIO;
f->frequency = radio->curfreq;
return 0;
}
v->rangelow = FREQ_MIN*FREQ_MUL;
v->rangehigh = FREQ_MAX*FREQ_MUL;
v->rxsubchans =V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO;
v->capability=V4L2_TUNER_CAP_LOW;
if(radio->stereo)
v->audmode = V4L2_TUNER_MODE_STEREO;
else
v->audmode = V4L2_TUNER_MODE_MONO;
v->signal = 0xFFFF; /* We can't get the signal strength */
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
int i;
for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
if (qc->id && qc->id == radio_qctrl[i].id) {
memcpy(qc, &(radio_qctrl[i]),
sizeof(*qc));
return 0;
}
case VIDIOC_S_TUNER:
{
struct v4l2_tuner *v = arg;
if (v->index > 0)
return -EINVAL;
}
return -EINVAL;
}
return 0;
}
case VIDIOC_S_FREQUENCY:
{
struct v4l2_frequency *f = arg;
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
radio->curfreq = f->frequency;
if (dsbr100_setfreq(radio, radio->curfreq)==-1)
warn("Set frequency failed");
return 0;
}
case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *f = arg;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value = radio->muted;
return 0;
}
return -EINVAL;
}
f->type = V4L2_TUNER_RADIO;
f->frequency = radio->curfreq;
static int vidioc_s_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct dsbr100_device *radio = video_get_drvdata(video_devdata(file));
return 0;
}
case VIDIOC_QUERYCTRL:
{
struct v4l2_queryctrl *qc = arg;
int i;
for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
if (qc->id && qc->id == radio_qctrl[i].id) {
memcpy(qc, &(radio_qctrl[i]),
sizeof(*qc));
return 0;
}
}
return -EINVAL;
}
case VIDIOC_G_CTRL:
{
struct v4l2_control *ctrl= arg;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value=radio->muted;
return 0;
}
return -EINVAL;
}
case VIDIOC_S_CTRL:
{
struct v4l2_control *ctrl= arg;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value) {
if (dsbr100_stop(radio)==-1)
warn("Radio did not respond properly");
} else {
if (dsbr100_start(radio)==-1)
warn("Radio did not respond properly");
}
return 0;
}
return -EINVAL;
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value) {
if (dsbr100_stop(radio)==-1)
warn("Radio did not respond properly");
} else {
if (dsbr100_start(radio)==-1)
warn("Radio did not respond properly");
}
default:
return v4l_compat_translate_ioctl(inode,file,cmd,arg,
usb_dsbr100_do_ioctl);
return 0;
}
return -EINVAL;
}
static int usb_dsbr100_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
static int vidioc_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
return video_usercopy(inode, file, cmd, arg, usb_dsbr100_do_ioctl);
if (a->index > 1)
return -EINVAL;
strcpy(a->name, "Radio");
a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
{
*i = 0;
return 0;
}
static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
{
if (i != 0)
return -EINVAL;
return 0;
}
static int vidioc_s_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
if (a->index != 0)
return -EINVAL;
return 0;
}
static int usb_dsbr100_open(struct inode *inode, struct file *file)
......@@ -465,6 +430,68 @@ static int usb_dsbr100_close(struct inode *inode, struct file *file)
return 0;
}
/* File system interface */
static const struct file_operations usb_dsbr100_fops = {
.owner = THIS_MODULE,
.open = usb_dsbr100_open,
.release = usb_dsbr100_close,
.ioctl = video_ioctl2,
.compat_ioctl = v4l_compat_ioctl32,
.llseek = no_llseek,
};
/* V4L2 interface */
static struct video_device dsbr100_videodev_template =
{
.owner = THIS_MODULE,
.name = "D-Link DSB-R 100",
.type = VID_TYPE_TUNER,
.fops = &usb_dsbr100_fops,
.release = video_device_release,
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
};
/* check if the device is present and register with v4l and
usb if it is */
static int usb_dsbr100_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct dsbr100_device *radio;
if (!(radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL)))
return -ENOMEM;
if (!(radio->videodev = video_device_alloc())) {
kfree(radio);
return -ENOMEM;
}
memcpy(radio->videodev, &dsbr100_videodev_template,
sizeof(dsbr100_videodev_template));
radio->removed = 0;
radio->users = 0;
radio->usbdev = interface_to_usbdev(intf);
radio->curfreq = FREQ_MIN*FREQ_MUL;
video_set_drvdata(radio->videodev, radio);
if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) {
warn("Could not register video device");
video_device_release(radio->videodev);
kfree(radio);
return -EIO;
}
usb_set_intfdata(intf, radio);
return 0;
}
static int __init dsbr100_init(void)
{
int retval = usb_register(&usb_dsbr100_driver);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册