Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver changes from Olof Johansson: "This is a rather large set of patches for device drivers that for one reason or another the subsystem maintainer preferred to get merged through the arm-soc tree. There are both new drivers as well as existing drivers that are getting converted from platform-specific code into standalone drivers using the appropriate subsystem specific interfaces. In particular, we can now have pinctrl, clk, clksource and irqchip drivers in one file per driver, without the need to call into platform specific interface, or to get called from platform specific code, as long as all information about the hardware is provided through a device tree. Most of the drivers we touch this time are for clocksource. Since now most of them are part of drivers/clocksource, I expect that we won't have to touch these again from arm-soc and can let the clocksource maintainers take care of these in the future. Another larger part of this series is specific to the exynos platform, which is seeing some significant effort in upstreaming and modernization of its device drivers this time around, which unfortunately is also the cause for the churn and a lot of the merge conflicts. There is one new subsystem that gets merged as part of this series: the reset controller interface, which is a very simple interface for taking devices on the SoC out of reset or back into reset. Patches to use this interface on i.MX follow later in this merge window, and we are going to have other platforms (at least tegra and sirf) get converted in 3.11. This will let us get rid of platform specific callbacks in a number of platform independent device drivers." * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits) irqchip: s3c24xx: add missing __init annotations ARM: dts: Disable the RTC by default on exynos5 clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3} ARM: exynos: restore mach/regs-clock.h for exynos5 clocksource: exynos_mct: fix build error on non-DT pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register() irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure reset: NULL deref on allocation failure reset: Add reset controller API dt: describe base reset signal binding ARM: EXYNOS: Add arm-pmu DT binding for exynos421x ARM: EXYNOS: Add arm-pmu DT binding for exynos5250 ARM: EXYNOS: Enable PMUs for exynos4 irqchip: exynos-combiner: Correct combined IRQs for exynos4 irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq ARM: EXYNOS: fix compilation error introduced due to common clock migration clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3} clk: exynos4: export clocks required for fimc-is clk: samsung: Fix compilation error clk: tegra: fix enum tegra114_clk to match binding ...
6fa52ed3 · Linus Torvalds · 1db77221 · bc8fd900 · 6fa52ed3 · 6fa52ed3
252 changed file
--- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
@@ -35,36 +35,83 @@ Required properties:

 Timing properties for child nodes. All are optional and default to 0.

- - gpmc,sync-clk:	Minimum clock period for synchronous mode, in picoseconds
-
- Chip-select signal timings corresponding to GPMC_CONFIG2:
- - gpmc,cs-on:		Assertion time
- - gpmc,cs-rd-off:	Read deassertion time
- - gpmc,cs-wr-off:	Write deassertion time
-
- ADV signal timings corresponding to GPMC_CONFIG3:
- - gpmc,adv-on:		Assertion time
- - gpmc,adv-rd-off:	Read deassertion time
- - gpmc,adv-wr-off:	Write deassertion time
-
- WE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,we-on:		Assertion time
- - gpmc,we-off:		Deassertion time
-
- OE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,oe-on:		Assertion time
- - gpmc,oe-off:		Deassertion time
-
- Access time and cycle time timings corresponding to GPMC_CONFIG5:
- - gpmc,page-burst-access: Multiple access word delay
- - gpmc,access:		Start-cycle to first data valid delay
- - gpmc,rd-cycle:	Total read cycle time
- - gpmc,wr-cycle:	Total write cycle time
+ - gpmc,sync-clk-ps:	Minimum clock period for synchronous mode, in picoseconds
+
+ Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
+ - gpmc,cs-on-ns:	Assertion time
+ - gpmc,cs-rd-off-ns:	Read deassertion time
+ - gpmc,cs-wr-off-ns:	Write deassertion time
+
+ ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
+ - gpmc,adv-on-ns:	Assertion time
+ - gpmc,adv-rd-off-ns:	Read deassertion time
+ - gpmc,adv-wr-off-ns:	Write deassertion time
+
+ WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,we-on-ns	Assertion time
+ - gpmc,we-off-ns:	Deassertion time
+
+ OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,oe-on-ns:	Assertion time
+ - gpmc,oe-off-ns:	Deassertion time
+
+ Access time and cycle time timings (in nanoseconds) corresponding to
+ GPMC_CONFIG5:
+ - gpmc,page-burst-access-ns: 	Multiple access word delay
+ - gpmc,access-ns:		Start-cycle to first data valid delay
+ - gpmc,rd-cycle-ns:		Total read cycle time
+ - gpmc,wr-cycle-ns:		Total write cycle time
+ - gpmc,bus-turnaround-ns:	Turn-around time between successive accesses
+ - gpmc,cycle2cycle-delay-ns:	Delay between chip-select pulses
+ - gpmc,clk-activation-ns: 	GPMC clock activation time
+ - gpmc,wait-monitoring-ns:	Start of wait monitoring with regard to valid
+				data
+
+Boolean timing parameters. If property is present parameter enabled and
+disabled if omitted:
+ - gpmc,adv-extra-delay:	ADV signal is delayed by half GPMC clock
+ - gpmc,cs-extra-delay:		CS signal is delayed by half GPMC clock
+ - gpmc,cycle2cycle-diffcsen:	Add "cycle2cycle-delay" between successive
+				accesses to a different CS
+ - gpmc,cycle2cycle-samecsen:	Add "cycle2cycle-delay" between successive
+				accesses to the same CS
+ - gpmc,oe-extra-delay:		OE signal is delayed by half GPMC clock
+ - gpmc,we-extra-delay:		WE signal is delayed by half GPMC clock
+ - gpmc,time-para-granularity:	Multiply all access times by 2

 The following are only applicable to OMAP3+ and AM335x:
- - gpmc,wr-access
- - gpmc,wr-data-mux-bus
-
+ - gpmc,wr-access-ns:		In synchronous write mode, for single or
+				burst accesses, defines the number of
+				GPMC_FCLK cycles from start access time
+				to the GPMC_CLK rising edge used by the
+				memory device for the first data capture.
+ - gpmc,wr-data-mux-bus-ns:	In address-data multiplex mode, specifies
+				the time when the first data is driven on
+				the address-data bus.
+
+GPMC chip-select settings properties for child nodes. All are optional.
+
+- gpmc,burst-length	Page/burst length. Must be 4, 8 or 16.
+- gpmc,burst-wrap	Enables wrap bursting
+- gpmc,burst-read	Enables read page/burst mode
+- gpmc,burst-write	Enables write page/burst mode
+- gpmc,device-nand	Device is NAND
+- gpmc,device-width	Total width of device(s) connected to a GPMC
+			chip-select in bytes. The GPMC supports 8-bit
+			and 16-bit devices and so this property must be
+			1 or 2.
+- gpmc,mux-add-data	Address and data multiplexing configuration.
+			Valid values are 1 for address-address-data
+			multiplexing mode and 2 for address-data
+			multiplexing mode.
+- gpmc,sync-read	Enables synchronous read. Defaults to asynchronous
+			is this is not set.
+- gpmc,sync-write	Enables synchronous writes. Defaults to asynchronous
+			is this is not set.
+- gpmc,wait-pin		Wait-pin used by client. Must be less than
+			"gpmc,num-waitpins".
+- gpmc,wait-on-read	Enables wait monitoring on reads.
+- gpmc,wait-on-write	Enables wait monitoring on writes.

 Example for an AM33xx board:


--- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+  - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+
+		 [Core Clocks]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  xxti                1
+  xusbxti             2
+  fin_pll             3
+  fout_apll           4
+  fout_mpll           5
+  fout_epll           6
+  fout_vpll           7
+  sclk_apll           8
+  sclk_mpll           9
+  sclk_epll           10
+  sclk_vpll           11
+  arm_clk             12
+  aclk200             13
+  aclk100             14
+  aclk160             15
+  aclk133             16
+  mout_mpll_user_t    17      Exynos4x12
+  mout_mpll_user_c    18      Exynos4x12
+  mout_core           19
+  mout_apll           20
+
+
+            [Clock Gate for Special Clocks]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  sclk_fimc0          128
+  sclk_fimc1          129
+  sclk_fimc2          130
+  sclk_fimc3          131
+  sclk_cam0           132
+  sclk_cam1           133
+  sclk_csis0          134
+  sclk_csis1          135
+  sclk_hdmi           136
+  sclk_mixer          137
+  sclk_dac            138
+  sclk_pixel          139
+  sclk_fimd0          140
+  sclk_mdnie0         141     Exynos4412
+  sclk_mdnie_pwm0 12  142     Exynos4412
+  sclk_mipi0          143
+  sclk_audio0         144
+  sclk_mmc0           145
+  sclk_mmc1           146
+  sclk_mmc2           147
+  sclk_mmc3           148
+  sclk_mmc4           149
+  sclk_sata           150     Exynos4210
+  sclk_uart0          151
+  sclk_uart1          152
+  sclk_uart2          153
+  sclk_uart3          154
+  sclk_uart4          155
+  sclk_audio1         156
+  sclk_audio2         157
+  sclk_spdif          158
+  sclk_spi0           159
+  sclk_spi1           160
+  sclk_spi2           161
+  sclk_slimbus        162
+  sclk_fimd1          163     Exynos4210
+  sclk_mipi1          164     Exynos4210
+  sclk_pcm1           165
+  sclk_pcm2           166
+  sclk_i2s1           167
+  sclk_i2s2           168
+  sclk_mipihsi        169     Exynos4412
+  sclk_mfc            170
+  sclk_pcm0           171
+  sclk_g3d            172
+  sclk_pwm_isp        173     Exynos4x12
+  sclk_spi0_isp       174     Exynos4x12
+  sclk_spi1_isp       175     Exynos4x12
+  sclk_uart_isp       176     Exynos4x12
+
+	      [Peripheral Clock Gates]
+
+  Clock               ID      SoC (if specific)
+  -----------------------------------------------
+
+  fimc0               256
+  fimc1               257
+  fimc2               258
+  fimc3               259
+  csis0               260
+  csis1               261
+  jpeg                262
+  smmu_fimc0          263
+  smmu_fimc1          264
+  smmu_fimc2          265
+  smmu_fimc3          266
+  smmu_jpeg           267
+  vp                  268
+  mixer               269
+  tvenc               270     Exynos4210
+  hdmi                271
+  smmu_tv             272
+  mfc                 273
+  smmu_mfcl           274
+  smmu_mfcr           275
+  g3d                 276
+  g2d                 277     Exynos4210
+  rotator             278     Exynos4210
+  mdma                279     Exynos4210
+  smmu_g2d            280     Exynos4210
+  smmu_rotator        281     Exynos4210
+  smmu_mdma           282     Exynos4210
+  fimd0               283
+  mie0                284
+  mdnie0              285     Exynos4412
+  dsim0               286
+  smmu_fimd0          287
+  fimd1               288     Exynos4210
+  mie1                289     Exynos4210
+  dsim1               290     Exynos4210
+  smmu_fimd1          291     Exynos4210
+  pdma0               292
+  pdma1               293
+  pcie_phy            294
+  sata_phy            295     Exynos4210
+  tsi                 296
+  sdmmc0              297
+  sdmmc1              298
+  sdmmc2              299
+  sdmmc3              300
+  sdmmc4              301
+  sata                302     Exynos4210
+  sromc               303
+  usb_host            304
+  usb_device          305
+  pcie                306
+  onenand             307
+  nfcon               308
+  smmu_pcie           309
+  gps                 310
+  smmu_gps            311
+  uart0               312
+  uart1               313
+  uart2               314
+  uart3               315
+  uart4               316
+  i2c0                317
+  i2c1                318
+  i2c2                319
+  i2c3                320
+  i2c4                321
+  i2c5                322
+  i2c6                323
+  i2c7                324
+  i2c_hdmi            325
+  tsadc               326
+  spi0                327
+  spi1                328
+  spi2                329
+  i2s1                330
+  i2s2                331
+  pcm0                332
+  i2s0                333
+  pcm1                334
+  pcm2                335
+  pwm                 336
+  slimbus             337
+  spdif               338
+  ac97                339
+  modemif             340
+  chipid              341
+  sysreg              342
+  hdmi_cec            343
+  mct                 344
+  wdt                 345
+  rtc                 346
+  keyif               347
+  audss               348
+  mipi_hsi            349     Exynos4210
+  mdma2               350     Exynos4210
+  pixelasyncm0        351
+  pixelasyncm1        352
+  fimc_lite0          353     Exynos4x12
+  fimc_lite1          354     Exynos4x12
+  ppmuispx            355     Exynos4x12
+  ppmuispmx           356     Exynos4x12
+  fimc_isp            357     Exynos4x12
+  fimc_drc            358     Exynos4x12
+  fimc_fd             359     Exynos4x12
+  mcuisp              360     Exynos4x12
+  gicisp              361     Exynos4x12
+  smmu_isp            362     Exynos4x12
+  smmu_drc            363     Exynos4x12
+  smmu_fd             364     Exynos4x12
+  smmu_lite0          365     Exynos4x12
+  smmu_lite1          366     Exynos4x12
+  mcuctl_isp          367     Exynos4x12
+  mpwm_isp            368     Exynos4x12
+  i2c0_isp            369     Exynos4x12
+  i2c1_isp            370     Exynos4x12
+  mtcadc_isp          371     Exynos4x12
+  pwm_isp             372     Exynos4x12
+  wdt_isp             373     Exynos4x12
+  uart_isp            374     Exynos4x12
+  asyncaxim           375     Exynos4x12
+  smmu_ispcx          376     Exynos4x12
+  spi0_isp            377     Exynos4x12
+  spi1_isp            378     Exynos4x12
+  pwm_isp_sclk        379     Exynos4x12
+  spi0_isp_sclk       380     Exynos4x12
+  spi1_isp_sclk       381     Exynos4x12
+  uart_isp_sclk       382     Exynos4x12
+
+		[Mux Clocks]
+
+  Clock			ID	SoC (if specific)
+  -----------------------------------------------
+
+  mout_fimc0		384
+  mout_fimc1		385
+  mout_fimc2		386
+  mout_fimc3		387
+  mout_cam0		388
+  mout_cam1		389
+  mout_csis0		390
+  mout_csis1		391
+  mout_g3d0		392
+  mout_g3d1		393
+  mout_g3d		394
+  aclk400_mcuisp	395	Exynos4x12
+
+		[Div Clocks]
+
+  Clock			ID	SoC (if specific)
+  -----------------------------------------------
+
+  div_isp0		450	Exynos4x12
+  div_isp1		451	Exynos4x12
+  div_mcuisp0		452	Exynos4x12
+  div_mcuisp1		453	Exynos4x12
+  div_aclk200		454	Exynos4x12
+  div_aclk400_mcuisp	455	Exynos4x12
+
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
--- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
+* Samsung Exynos5250 Clock Controller
+
+The Exynos5250 clock controller generates and supplies clock to various
+controllers within the Exynos5250 SoC.
+
+Required Properties:
+
+- comptible: should be one of the following.
+  - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  fin_pll		1
+
+  [Clock Gate for Special Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  sclk_cam_bayer	128
+  sclk_cam0		129
+  sclk_cam1		130
+  sclk_gscl_wa		131
+  sclk_gscl_wb		132
+  sclk_fimd1		133
+  sclk_mipi1		134
+  sclk_dp		135
+  sclk_hdmi		136
+  sclk_pixel		137
+  sclk_audio0		138
+  sclk_mmc0		139
+  sclk_mmc1		140
+  sclk_mmc2		141
+  sclk_mmc3		142
+  sclk_sata		143
+  sclk_usb3		144
+  sclk_jpeg		145
+  sclk_uart0		146
+  sclk_uart1		147
+  sclk_uart2		148
+  sclk_uart3		149
+  sclk_pwm		150
+  sclk_audio1		151
+  sclk_audio2		152
+  sclk_spdif		153
+  sclk_spi0		154
+  sclk_spi1		155
+  sclk_spi2		156
+
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  gscl0			256
+  gscl1			257
+  gscl2			258
+  gscl3			259
+  gscl_wa		260
+  gscl_wb		261
+  smmu_gscl0		262
+  smmu_gscl1		263
+  smmu_gscl2		264
+  smmu_gscl3		265
+  mfc			266
+  smmu_mfcl		267
+  smmu_mfcr		268
+  rotator		269
+  jpeg			270
+  mdma1			271
+  smmu_rotator		272
+  smmu_jpeg		273
+  smmu_mdma1		274
+  pdma0			275
+  pdma1			276
+  sata			277
+  usbotg		278
+  mipi_hsi		279
+  sdmmc0		280
+  sdmmc1		281
+  sdmmc2		282
+  sdmmc3		283
+  sromc			284
+  usb2			285
+  usb3			286
+  sata_phyctrl		287
+  sata_phyi2c		288
+  uart0			289
+  uart1			290
+  uart2			291
+  uart3			292
+  uart4			293
+  i2c0			294
+  i2c1			295
+  i2c2			296
+  i2c3			297
+  i2c4			298
+  i2c5			299
+  i2c6			300
+  i2c7			301
+  i2c_hdmi		302
+  adc			303
+  spi0			304
+  spi1			305
+  spi2			306
+  i2s1			307
+  i2s2			308
+  pcm1			309
+  pcm2			310
+  pwm			311
+  spdif			312
+  ac97			313
+  hsi2c0		314
+  hsi2c1		315
+  hs12c2		316
+  hs12c3		317
+  chipid		318
+  sysreg		319
+  pmu			320
+  cmu_top		321
+  cmu_core		322
+  cmu_mem		323
+  tzpc0			324
+  tzpc1			325
+  tzpc2			326
+  tzpc3			327
+  tzpc4			328
+  tzpc5			329
+  tzpc6			330
+  tzpc7			331
+  tzpc8			332
+  tzpc9			333
+  hdmi_cec		334
+  mct			335
+  wdt			336
+  rtc			337
+  tmu			338
+  fimd1			339
+  mie1			340
+  dsim0			341
+  dp			342
+  mixer			343
+  hdmi			345
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5250-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the clock
+	   controller. Refer to the standard clock bindings for information
+	   about 'clocks' and 'clock-names' property.
+
+	serial@13820000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x13820000 0x100>;
+		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+       [Core Clocks]
+
+  Clock			ID
+  ----------------------------
+
+  xtal			1
+  arm_clk		2
+
+   [Peripheral Clock Gates]
+
+  Clock			ID
+  ----------------------------
+
+  spi_baud		16
+  pb0_250		17
+  pr0_250		18
+  pr1_250		19
+  b_250			20
+  b_125			21
+  b_200			22
+  sata			23
+  usb			24
+  gmac0			25
+  cs250			26
+  pb0_250_o		27
+  pr0_250_o		28
+  pr1_250_o		29
+  b_250_o		30
+  b_125_o		31
+  b_200_o		32
+  sata_o		33
+  usb_o			34
+  gmac0_o		35
+  cs250_o		36
+
+Example: An example of a clock controller node is listed below.
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x10000>;
+		#clock-cells = <1>;
+	};
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
+NVIDIA Tegra114 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra114-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+  the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+  In clock consumers, this cell represents the clock ID exposed by the CAR.
+
+  The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+  registers. These IDs often match those in the CAR's RST_DEVICES registers,
+  but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+  this case, those clocks are assigned IDs above 160 in order to highlight
+  this issue. Implementations that interpret these clock IDs as bit values
+  within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+  explicitly handle these special cases.
+
+  The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+  above.
+
+  0	unassigned
+  1	unassigned
+  2	unassigned
+  3	unassigned
+  4	rtc
+  5	timer
+  6	uarta
+  7	unassigned	(register bit affects uartb and vfir)
+  8	unassigned
+  9	sdmmc2
+  10	unassigned	(register bit affects spdif_in and spdif_out)
+  11	i2s1
+  12	i2c1
+  13	ndflash
+  14	sdmmc1
+  15	sdmmc4
+  16	unassigned
+  17	pwm
+  18	i2s2
+  19	epp
+  20	unassigned	(register bit affects vi and vi_sensor)
+  21	2d
+  22	usbd
+  23	isp
+  24	3d
+  25	unassigned
+  26	disp2
+  27	disp1
+  28	host1x
+  29	vcp
+  30	i2s0
+  31	unassigned
+
+  32	unassigned
+  33	unassigned
+  34	apbdma
+  35	unassigned
+  36	kbc
+  37	unassigned
+  38	unassigned
+  39	unassigned	(register bit affects fuse and fuse_burn)
+  40	kfuse
+  41	sbc1
+  42	nor
+  43	unassigned
+  44	sbc2
+  45	unassigned
+  46	sbc3
+  47	i2c5
+  48	dsia
+  49	unassigned
+  50	mipi
+  51	hdmi
+  52	csi
+  53	unassigned
+  54	i2c2
+  55	uartc
+  56	mipi-cal
+  57	emc
+  58	usb2
+  59	usb3
+  60	msenc
+  61	vde
+  62	bsea
+  63	bsev
+
+  64	unassigned
+  65	uartd
+  66	unassigned
+  67	i2c3
+  68	sbc4
+  69	sdmmc3
+  70	unassigned
+  71	owr
+  72	afi
+  73	csite
+  74	unassigned
+  75	unassigned
+  76	la
+  77	trace
+  78	soc_therm
+  79	dtv
+  80	ndspeed
+  81	i2cslow
+  82	dsib
+  83	tsec
+  84	unassigned
+  85	unassigned
+  86	unassigned
+  87	unassigned
+  88	unassigned
+  89	xusb_host
+  90	unassigned
+  91	msenc
+  92	csus
+  93	unassigned
+  94	unassigned
+  95	unassigned	(bit affects xusb_dev and xusb_dev_src)
+
+  96	unassigned
+  97	unassigned
+  98	unassigned
+  99	mselect
+  100	tsensor
+  101	i2s3
+  102	i2s4
+  103	i2c4
+  104	sbc5
+  105	sbc6
+  106	d_audio
+  107	apbif
+  108	dam0
+  109	dam1
+  110	dam2
+  111	hda2codec_2x
+  112	unassigned
+  113	audio0_2x
+  114	audio1_2x
+  115	audio2_2x
+  116	audio3_2x
+  117	audio4_2x
+  118	spdif_2x
+  119	actmon
+  120	extern1
+  121	extern2
+  122	extern3
+  123	unassigned
+  124	unassigned
+  125	hda
+  126	unassigned
+  127	se
+
+  128	hda2hdmi
+  129	unassigned
+  130	unassigned
+  131	unassigned
+  132	unassigned
+  133	unassigned
+  134	unassigned
+  135	unassigned
+  136	unassigned
+  137	unassigned
+  138	unassigned
+  139	unassigned
+  140	unassigned
+  141	unassigned
+  142	unassigned
+  143	unassigned	(bit affects xusb_falcon_src, xusb_fs_src,
+			 xusb_host_src and xusb_ss_src)
+  144	cilab
+  145	cilcd
+  146	cile
+  147	dsialp
+  148	dsiblp
+  149	unassigned
+  150	dds
+  151	unassigned
+  152	dp2
+  153	amx
+  154	adx
+  155	unassigned	(bit affects dfll_ref and dfll_soc)
+  156	xusb_ss
+
+  192	uartb
+  193	vfir
+  194	spdif_in
+  195	spdif_out
+  196	vi
+  197	vi_sensor
+  198	fuse
+  199	fuse_burn
+  200	clk_32k
+  201	clk_m
+  202	clk_m_div2
+  203	clk_m_div4
+  204	pll_ref
+  205	pll_c
+  206	pll_c_out1
+  207	pll_c2
+  208	pll_c3
+  209	pll_m
+  210	pll_m_out1
+  211	pll_p
+  212	pll_p_out1
+  213	pll_p_out2
+  214	pll_p_out3
+  215	pll_p_out4
+  216	pll_a
+  217	pll_a_out0
+  218	pll_d
+  219	pll_d_out0
+  220	pll_d2
+  221	pll_d2_out0
+  222	pll_u
+  223	pll_u_480M
+  224	pll_u_60M
+  225	pll_u_48M
+  226	pll_u_12M
+  227	pll_x
+  228	pll_x_out0
+  229	pll_re_vco
+  230	pll_re_out
+  231	pll_e_out0
+  232	spdif_in_sync
+  233	i2s0_sync
+  234	i2s1_sync
+  235	i2s2_sync
+  236	i2s3_sync
+  237	i2s4_sync
+  238	vimclk_sync
+  239	audio0
+  240	audio1
+  241	audio2
+  242	audio3
+  243	audio4
+  244	spdif
+  245	clk_out_1
+  246	clk_out_2
+  247	clk_out_3
+  248	blink
+  252	xusb_host_src
+  253	xusb_falcon_src
+  254	xusb_fs_src
+  255	xusb_ss_src
+  256	xusb_dev_src
+  257	xusb_dev
+  258	xusb_hs_src
+  259	sclk
+  260	hclk
+  261	pclk
+  262	cclk_g
+  263	cclk_lp
+  264	dfll_ref
+  265	dfll_soc
+
+Example SoC include file:
+
+/ {
+	tegra_car: clock {
+		compatible = "nvidia,tegra114-car";
+		reg = <0x60006000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	usb@c5004000 {
+		clocks = <&tegra_car 58>; /* usb2 */
+	};
+};
+
+Example board file:
+
+/ {
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc: clock@0 {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		clk_32k: clock@1 {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	&tegra_car {
+		clocks = <&clk_32k> <&osc>;
+	};
+};
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -120,8 +120,8 @@ Required properties :
  90	clk_d
  91	unassigned
  92	sus
-  93	cdev1
-  94	cdev2
+  93	cdev2
+  94	cdev1
  95	unassigned

  96	uart2

--- a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
-VIA/Wondermedia VT8500 GPIO Controller
-----------------------------------------------------
-
-Required properties:
- compatible : "via,vt8500-gpio", "wm,wm8505-gpio"
-	or "wm,wm8650-gpio" depending on your SoC
- reg : Should contain 1 register range (address and length)
- #gpio-cells : should be <3>.
-	1) bank
-	2) pin number
-	3) flags - should be 0
-
-Example:
-
-	gpio: gpio-controller@d8110000 {
-		compatible = "via,vt8500-gpio";
-		gpio-controller;
-		reg = <0xd8110000 0x10000>;
-		#gpio-cells = <3>;
-	};
-
-	vibrate {
-		gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */
-	};
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
+Samsung S3C24XX Interrupt Controllers
+
+The S3C24XX SoCs contain a custom set of interrupt controllers providing a
+varying number of interrupt sources. The set consists of a main- and sub-
+controller and on newer SoCs even a second main controller.
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c2410-irq"
+  for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
+
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 4 and interrupt descriptor shall
+  have the following format:
+      <ctrl_num parent_irq ctrl_irq type>
+
+  ctrl_num contains the controller to use:
+      - 0 ... main controller
+      - 1 ... sub controller
+      - 2 ... second main controller on s3c2416 and s3c2450
+  parent_irq contains the parent bit in the main controller and will be
+             ignored in main controllers
+  ctrl_irq contains the interrupt bit of the controller
+  type contains the trigger type to use
+
+Example:
+
+	interrupt-controller@4a000000 {
+		compatible = "samsung,s3c2410-irq";
+		reg = <0x4a000000 0x100>;
+		interrupt-controller;
+		#interrupt-cells=<4>;
+	};
+
+	[...]
+
+	serial@50000000 {
+		compatible = "samsung,s3c2410-uart";
+		reg = <0x50000000 0x4000>;
+		interrupt-parent = <&subintc>;
+		interrupts = <1 28 0 4>, <1 28 1 4>;
+	};
+
+	rtc@57000000 {
+		compatible = "samsung,s3c2410-rtc";
+		reg = <0x57000000 0x100>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 30 0 3>, <0 8 0 3>;
+	};
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -21,3 +21,24 @@ Required properties:

  - samsung,mfc-l : Base address of the second memory bank used by MFC
 		    for DMA contiguous memory allocation and its size.
+
+Optional properties:
+  - samsung,power-domain : power-domain property defined with a phandle
+			   to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+	compatible = "samsung,mfc-v5";
+	reg = <0x13400000 0x10000>;
+	interrupts = <0 94 0>;
+	samsung,power-domain = <&pd_mfc>;
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
--- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
+Device tree bindings for NOR flash connect to TI GPMC
+
+NOR flash connected to the TI GPMC (found on OMAP boards) are represented as
+child nodes of the GPMC controller with a name of "nor".
+
+All timing relevant properties as well as generic GPMC child properties are
+explained in a separate documents. Please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Required properties:
+- bank-width: 		Width of NOR flash in bytes. GPMC supports 8-bit and
+			16-bit devices and so must be either 1 or 2 bytes.
+- compatible:		Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+- gpmc,cs-on-ns:		Chip-select assertion time
+- gpmc,cs-rd-off-ns:	Chip-select de-assertion time for reads
+- gpmc,cs-wr-off-ns:	Chip-select de-assertion time for writes
+- gpmc,oe-on-ns:	Output-enable assertion time
+- gpmc,oe-off-ns:	Output-enable de-assertion time
+- gpmc,we-on-ns		Write-enable assertion time
+- gpmc,we-off-ns:	Write-enable de-assertion time
+- gpmc,access-ns:	Start cycle to first data capture (read access)
+- gpmc,rd-cycle-ns:	Total read cycle time
+- gpmc,wr-cycle-ns:	Total write cycle time
+- linux,mtd-name:	Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+- reg:			Chip-select, base address (relative to chip-select)
+			and size of NOR flash. Note that base address will be
+			typically 0 as this is the start of the chip-select.
+
+Optional properties:
+- gpmc,XXX		Additional GPMC timings and settings parameters. See
+			Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Optional properties for partiton table parsing:
+- #address-cells: should be set to 1
+- #size-cells: should be set to 1
+
+Example:
+
+gpmc: gpmc@6e000000 {
+	compatible = "ti,omap3430-gpmc", "simple-bus";
+	ti,hwmods = "gpmc";
+	reg = <0x6e000000 0x1000>;
+	interrupts = <20>;
+	gpmc,num-cs = <8>;
+	gpmc,num-waitpins = <4>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	ranges = <0 0 0x10000000 0x08000000>;
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		linux,mtd-name= "intel,pf48f6000m0y1be";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0 0 0x08000000>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <186>;
+		gpmc,cs-wr-off-ns = <186>;
+		gpmc,adv-on-ns = <12>;
+		gpmc,adv-rd-off-ns = <48>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <114>;
+		gpmc,page-burst-access-ns = <6>;
+		gpmc,bus-turnaround-ns = <12>;
+		gpmc,cycle2cycle-delay-ns = <18>;
+		gpmc,wr-data-mux-bus-ns = <90>;
+		gpmc,wr-access-ns = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		partition@0 {
+			label = "bootloader-nor";
+			reg = <0 0x40000>;
+		};
+		partition@0x40000 {
+			label = "params-nor";
+			reg = <0x40000 0x40000>;
+		};
+		partition@0x80000 {
+			label = "kernel-nor";
+			reg = <0x80000 0x200000>;
+		};
+		partition@0x280000 {
+			label = "filesystem-nor";
+			reg = <0x240000 0x7d80000>;
+		};
+	};
+};
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
@@ -10,6 +10,8 @@ Documentation/devicetree/bindings/bus/ti-gpmc.txt
 Required properties:

 - reg:			The CS line the peripheral is connected to
+ - gpmc,device-width	Width of the ONENAND device connected to the GPMC
+			in bytes. Must be 1 or 2.

 Optional properties:

@@ -34,6 +36,7 @@ Example for an OMAP3430 board:

 		onenand@0 {
 			reg = <0 0 0>; /* CS0, offset 0 */
+			gpmc,device-width = <2>;

 			#address-cells = <1>;
 			#size-cells = <1>;

--- a/Documentation/devicetree/bindings/net/gpmc-eth.txt
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
+Device tree bindings for Ethernet chip connected to TI GPMC
+
+Besides being used to interface with external memory devices, the
+General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices
+such as ethernet controllers to processors using the TI GPMC as a data bus.
+
+Ethernet controllers connected to TI GPMC are represented as child nodes of
+the GPMC controller with an "ethernet" name.
+
+All timing relevant properties as well as generic GPMC child properties are
+explained in a separate documents. Please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+For the properties relevant to the ethernet controller connected to the GPMC
+refer to the binding documentation of the device. For example, the documentation
+for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt
+
+Child nodes need to specify the GPMC bus address width using the "bank-width"
+property but is possible that an ethernet controller also has a property to
+specify the I/O registers address width. Even when the GPMC has a maximum 16-bit
+address width, it supports devices with 32-bit word registers.
+For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an
+OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;".
+
+Required properties:
+- bank-width: 		Address width of the device in bytes. GPMC supports 8-bit
+			and 16-bit devices and so must be either 1 or 2 bytes.
+- compatible:		Compatible string property for the ethernet child device.
+- gpmc,cs-on:		Chip-select assertion time
+- gpmc,cs-rd-off:	Chip-select de-assertion time for reads
+- gpmc,cs-wr-off:	Chip-select de-assertion time for writes
+- gpmc,oe-on:		Output-enable assertion time
+- gpmc,oe-off		Output-enable de-assertion time
+- gpmc,we-on:		Write-enable assertion time
+- gpmc,we-off:		Write-enable de-assertion time
+- gpmc,access:		Start cycle to first data capture (read access)
+- gpmc,rd-cycle:	Total read cycle time
+- gpmc,wr-cycle:	Total write cycle time
+- reg:			Chip-select, base address (relative to chip-select)
+			and size of the memory mapped for the device.
+			Note that base address will be typically 0 as this
+			is the start of the chip-select.
+
+Optional properties:
+- gpmc,XXX		Additional GPMC timings and settings parameters. See
+			Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Example:
+
+gpmc: gpmc@6e000000 {
+	compatible = "ti,omap3430-gpmc";
+	ti,hwmods = "gpmc";
+	reg = <0x6e000000 0x1000>;
+	interrupts = <20>;
+	gpmc,num-cs = <8>;
+	gpmc,num-waitpins = <4>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	ranges = <5 0 0x2c000000 0x1000000>;
+
+	ethernet@5,0 {
+		compatible = "smsc,lan9221", "smsc,lan9115";
+		reg = <5 0 0xff>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data;
+		gpmc,cs-on = <0>;
+		gpmc,cs-rd-off = <186>;
+		gpmc,cs-wr-off = <186>;
+		gpmc,adv-on = <12>;
+		gpmc,adv-rd-off = <48>;
+		gpmc,adv-wr-off = <48>;
+		gpmc,oe-on = <54>;
+		gpmc,oe-off = <168>;
+		gpmc,we-on = <54>;
+		gpmc,we-off = <168>;
+		gpmc,rd-cycle = <186>;
+		gpmc,wr-cycle = <186>;
+		gpmc,access = <114>;
+		gpmc,page-burst-access = <6>;
+		gpmc,bus-turnaround = <12>;
+		gpmc,cycle2cycle-delay = <18>;
+		gpmc,wr-data-mux-bus = <90>;
+		gpmc,wr-access = <186>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <16>;
+		vmmc-supply = <&vddvario>;
+		vmmc_aux-supply = <&vdd33a>;
+		reg-io-width = <4>;
+
+		smsc,save-mac-address;
+	};
+};
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
+VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller
+
+These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as
+either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc).
+
+Required properties:
+- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl",
+	"wm8750-pinctrl" or "wm,wm8850-pinctrl"
+- reg: Should contain the physical address of the module's registers.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters.
+	bit 0 - active low
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux functions to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pull parameter implies no information about the mux function.
+
+Required subnode-properties:
+- wm,pins: An array of cells. Each cell contains the ID of a pin.
+
+Optional subnode-properties:
+- wm,function: Integer, containing the function to mux to the pin(s):
+  0: GPIO in
+  1: GPIO out
+  2: alternate
+
+- wm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+  0: none
+  1: down
+  2: up
+
+Each of wm,function and wm,pull may contain either a single value which
+will be applied to all pins in wm,pins, or one value for each entry in
+wm,pins.
+
+Example:
+
+	pinctrl: pinctrl {
+		compatible = "wm,wm8505-pinctrl";
+		reg = <0xD8110000 0x10000>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
--- a/Documentation/devicetree/bindings/reset/reset.txt
+++ b/Documentation/devicetree/bindings/reset/reset.txt
+= Reset Signal Device Tree Bindings =
+
+This binding is intended to represent the hardware reset signals present
+internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
+standalone chips are most likely better represented as GPIOs, although there
+are likely to be exceptions to this rule.
+
+Hardware blocks typically receive a reset signal. This signal is generated by
+a reset provider (e.g. power management or clock module) and received by a
+reset consumer (the module being reset, or a module managing when a sub-
+ordinate module is reset). This binding exists to represent the provider and
+consumer, and provide a way to couple the two together.
+
+A reset signal is represented by the phandle of the provider, plus a reset
+specifier - a list of DT cells that represents the reset signal within the
+provider. The length (number of cells) and semantics of the reset specifier
+are dictated by the binding of the reset provider, although common schemes
+are described below.
+
+A word on where to place reset signal consumers in device tree: It is possible
+in hardware for a reset signal to affect multiple logically separate HW blocks
+at once. In this case, it would be unwise to represent this reset signal in
+the DT node of each affected HW block, since if activated, an unrelated block
+may be reset. Instead, reset signals should be represented in the DT node
+where it makes most sense to control it; this may be a bus node if all
+children of the bus are affected by the reset signal, or an individual HW
+block node for dedicated reset signals. The intent of this binding is to give
+appropriate software access to the reset signals in order to manage the HW,
+rather than to slavishly enumerate the reset signal that affects each HW
+block.
+
+= Reset providers =
+
+Required properties:
+#reset-cells:	Number of cells in a reset specifier; Typically 0 for nodes
+		with a single reset output and 1 for nodes with multiple
+		reset outputs.
+
+For example:
+
+	rst: reset-controller {
+		#reset-cells = <1>;
+	};
+
+= Reset consumers =
+
+Required properties:
+resets:		List of phandle and reset specifier pairs, one pair
+		for each reset signal that affects the device, or that the
+		device manages. Note: if the reset provider specifies '0' for
+		#reset-cells, then only the phandle portion of the pair will
+		appear.
+
+Optional properties:
+reset-names:	List of reset signal name strings sorted in the same order as
+		the resets property. Consumers drivers will use reset-names to
+		match reset signal names with reset specifiers.
+
+For example:
+
+	device {
+		resets = <&rst 20>;
+		reset-names = "reset";
+	};
+
+This represents a device with a single reset signal named "reset".
+
+	bus {
+		resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
+		reset-names = "i2s1", "i2s2", "dma", "mixer";
+	};
+
+This represents a bus that controls the reset signal of each of four sub-
+ordinate devices. Consider for example a bus that fails to operate unless no
+child device has reset asserted.
--- a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
+++ b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
+Cadence TTC - Triple Timer Counter
+
+Required properties:
+- compatible : Should be "cdns,ttc".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 3 interrupts; one per timer channel.
+- clocks: phandle to the source clock
+
+Example:
+
+ttc0: ttc0@f8001000 {
+	interrupt-parent = <&intc>;
+	interrupts = < 0 10 4 0 11 4 0 12 4 >;
+	compatible = "cdns,ttc";
+	reg = <0xF8001000 0x1000>;
+	clocks = <&cpu_clk 3>;
+};
--- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+  (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+  (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+  it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+  should be the order of the interrupts specified. The local timer interrupts
+  should be specified after the four global timer interrupts have been
+  specified.
+
+	0: Global Timer Interrupt 0
+	1: Global Timer Interrupt 1
+	2: Global Timer Interrupt 2
+	3: Global Timer Interrupt 3
+	4: Local Timer Interrupt 0
+	5: Local Timer Interrupt 1
+	6: ..
+	7: ..
+	i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+	   interrupt generated by MCT and the remaining three global timer
+	   interrupts are unused. Two local timer interrupts have been
+	   specified.
+
+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+			     <0 42 0>, <0 48 0>;
+	};
+
+Example 2: In this example, the MCT global and local timer interrupts are
+	   connected to two seperate interrupt controllers. Hence, an
+	   interrupt-map is created to map the interrupts to the respective
+	   interrupt controllers.
+
+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+   EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+
+Optional properties:
+ - samsung,vbus-gpio:  if present, specifies the GPIO that
+   needs to be pulled up for the bus to be powered.
+
+Example:
+
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+   OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+
+Example:
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+	};
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -689,12 +689,15 @@ config ARCH_SA1100
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
 	select ARCH_HAS_CPUFREQ
-	select ARCH_USES_GETTIMEOFFSET
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
+	select MULTI_IRQ_HANDLER
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	help
@@ -707,10 +710,11 @@ config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select ARM_VIC
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_V6
+	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -744,9 +748,11 @@ config ARCH_S5P64X0

 config ARCH_S5PC100
 	bool "Samsung S5PC100"
-	select ARCH_USES_GETTIMEOFFSET
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_V7
+	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -779,6 +785,7 @@ config ARCH_EXYNOS
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
@@ -1552,7 +1559,8 @@ config ARCH_NR_GPIO
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 512 if SOC_OMAP5
 	default 392 if ARCH_U8500
-	default 288 if ARCH_VT8500 || ARCH_SUNXI
+	default 352 if ARCH_VT8500
+	default 288 if ARCH_SUNXI
 	default 264 if MACH_H4700
 	default 0
 	help

--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -49,7 +49,10 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
+	exynos4412-odroidx.dtb \
 	exynos4412-smdk4412.dtb \
+	exynos4412-origen.dtb \
+	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
 	exynos5440-ssdk5440.dtb

--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -24,6 +24,144 @@
 		samsung,i2c-max-bus-freq = <378000>;
 		gpios = <&gpb3 0 2 3 0>,
 			<&gpb3 1 2 3 0>;
+
+		max77686@09 {
+			compatible = "maxim,max77686";
+			reg = <0x09>;
+
+			voltage-regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "P1.0V_LDO_OUT1";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "P1.8V_LDO_OUT2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "P1.8V_LDO_OUT3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "P1.1V_LDO_OUT7";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "P1.0V_LDO_OUT8";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "P1.8V_LDO_OUT10";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "P3.0V_LDO_OUT12";
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					regulator-always-on;
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "P1.8V_LDO_OUT14";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "P1.0V_LDO_OUT15";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "P1.8V_LDO_OUT16";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "P1.8V_BUCK_OUT5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "P1.35V_BUCK_OUT6";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+				};
+
+				buck7_reg: BUCK7 {
+					regulator-name = "P2.0V_BUCK_OUT7";
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					regulator-always-on;
+				};
+
+				buck8_reg: BUCK8 {
+					regulator-name = "P2.85V_BUCK_OUT8";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+			};
+		};
 	};

 	i2c@12C70000 {

--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -86,6 +86,8 @@
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
+		clocks = <&clock 345>;
+		clock-names = "watchdog";
 		status = "disabled";
 	};

@@ -93,6 +95,8 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <0 44 0>, <0 45 0>;
+		clocks = <&clock 346>;
+		clock-names = "rtc";
 		status = "disabled";
 	};

@@ -100,6 +104,8 @@
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
+		clocks = <&clock 347>;
+		clock-names = "keypad";
 		status = "disabled";
 	};

@@ -107,6 +113,8 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
+		clocks = <&clock 297>, <&clock 145>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};

@@ -114,6 +122,8 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
+		clocks = <&clock 298>, <&clock 146>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};

@@ -121,6 +131,8 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
+		clocks = <&clock 299>, <&clock 147>;
+		clock-names = "hsmmc", "mmc_busclk.2";
 		status = "disabled";
 	};

@@ -128,6 +140,16 @@
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
+		clocks = <&clock 300>, <&clock 148>;
+		clock-names = "hsmmc", "mmc_busclk.2";
+		status = "disabled";
+	};
+
+	mfc: codec@13400000 {
+		compatible = "samsung,mfc-v5";
+		reg = <0x13400000 0x10000>;
+		interrupts = <0 94 0>;
+		samsung,power-domain = <&pd_mfc>;
 		status = "disabled";
 	};

@@ -135,6 +157,8 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13800000 0x100>;
 		interrupts = <0 52 0>;
+		clocks = <&clock 312>, <&clock 151>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};

@@ -142,6 +166,8 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13810000 0x100>;
 		interrupts = <0 53 0>;
+		clocks = <&clock 313>, <&clock 152>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};

@@ -149,6 +175,8 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13820000 0x100>;
 		interrupts = <0 54 0>;
+		clocks = <&clock 314>, <&clock 153>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};

@@ -156,6 +184,8 @@
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x13830000 0x100>;
 		interrupts = <0 55 0>;
+		clocks = <&clock 315>, <&clock 154>;
+		clock-names = "uart", "clk_uart_baud0";
 		status = "disabled";
 	};

@@ -165,6 +195,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
+		clocks = <&clock 317>;
+		clock-names = "i2c";
 		status = "disabled";
 	};

@@ -174,6 +206,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13870000 0x100>;
 		interrupts = <0 59 0>;
+		clocks = <&clock 318>;
+		clock-names = "i2c";
 		status = "disabled";
 	};

@@ -183,6 +217,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13880000 0x100>;
 		interrupts = <0 60 0>;
+		clocks = <&clock 319>;
+		clock-names = "i2c";
 		status = "disabled";
 	};

@@ -192,6 +228,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13890000 0x100>;
 		interrupts = <0 61 0>;
+		clocks = <&clock 320>;
+		clock-names = "i2c";
 		status = "disabled";
 	};

@@ -201,6 +239,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138A0000 0x100>;
 		interrupts = <0 62 0>;
+		clocks = <&clock 321>;
+		clock-names = "i2c";
 		status = "disabled";
 	};

@@ -210,6 +250,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138B0000 0x100>;
 		interrupts = <0 63 0>;
+		clocks = <&clock 322>;
+		clock-names = "i2c";
 		status = "disabled";
 	};

@@ -219,6 +261,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138C0000 0x100>;
 		interrupts = <0 64 0>;
+		clocks = <&clock 323>;
+		clock-names = "i2c";
 		status = "disabled";
 	};

@@ -228,6 +272,8 @@
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x138D0000 0x100>;
 		interrupts = <0 65 0>;
+		clocks = <&clock 324>;
+		clock-names = "i2c";
 		status = "disabled";
 	};

@@ -239,6 +285,8 @@
 		rx-dma-channel = <&pdma0 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 327>, <&clock 159>;
+		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};

@@ -250,6 +298,8 @@
 		rx-dma-channel = <&pdma1 6>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 328>, <&clock 160>;
+		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};

@@ -261,6 +311,8 @@
 		rx-dma-channel = <&pdma0 8>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 329>, <&clock 161>;
+		clock-names = "spi", "spi_busclk0";
 		status = "disabled";
 	};

@@ -275,6 +327,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 292>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -284,6 +338,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <0 36 0>;
+			clocks = <&clock 293>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -293,6 +349,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 279>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;

--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -57,6 +57,12 @@
 		status = "okay";
 	};

+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -121,4 +127,16 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -43,6 +43,12 @@
 		status = "okay";
 	};

+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -189,4 +195,16 @@
 			};
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <12000000>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -289,4 +289,16 @@
 			};
 		};
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -47,6 +47,42 @@
 			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
 	};

+	mct@10050000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &gic 0 69 0>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 0 42 0>,
+					<0x5 0 &gic 0 48 0>;
+		};
+	};
+
+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4210-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>, <3 2>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;

--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -25,4 +25,26 @@
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Hardkernel ODROID-X board based on Exynos4412";
+	compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "led1:heart";
+			gpios = <&gpc1 0 1>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led2 {
+			label = "led2:mmc0";
+			gpios = <&gpc1 2 1>;
+			default-state = "on";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	mshc@12550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	regulator_p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpa1 1 1>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	rtc@10070000 {
+		status = "okay";
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Insignal Origen evaluation board based on Exynos4412";
+	compatible = "insignal,origen4412", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs ="console=ttySAC2,115200";
+	};
+
+	mmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 0>;
+		enable-active-high;
+	};
+
+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
+		status = "okay";
+	};
+
+	mshc@12550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+		};
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
+	i2c@13860000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <20000>;
+		pinctrl-0 = <&i2c0_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		s5m8767_pmic@66 {
+			compatible = "samsung,s5m8767-pmic";
+			reg = <0x66>;
+
+			s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+			s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+							 <&gpx2 4 0>,
+							 <&gpx2 5 0>;
+
+			s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+							<&gpm3 6 0>,
+							<&gpm3 7 0>;
+
+			s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+							 <1100000>, <1100000>,
+							 <1100000>, <1100000>,
+							 <1100000>, <1100000>;
+
+			s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>,
+							 <1200000>, <1200000>;
+
+			regulators {
+				ldo1_reg: LDO1 {
+					regulator-name = "VDD_ALIVE";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo2_reg: LDO2 {
+					regulator-name = "VDDQ_M12";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo3_reg: LDO3 {
+					regulator-name = "VDDIOAP_18";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo4_reg: LDO4 {
+					regulator-name = "VDDQ_PRE";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo5_reg: LDO5 {
+					regulator-name = "VDD18_2M";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo6_reg: LDO6 {
+					regulator-name = "VDD10_MPLL";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo7_reg: LDO7 {
+					regulator-name = "VDD10_XPLL";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo8_reg: LDO8 {
+					regulator-name = "VDD10_MIPI";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo9_reg: LDO9 {
+					regulator-name = "VDD33_LCD";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo10_reg: LDO10 {
+					regulator-name = "VDD18_MIPI";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo11_reg: LDO11 {
+					regulator-name = "VDD18_ABB1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo12_reg: LDO12 {
+					regulator-name = "VDD33_UOTG";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo13_reg: LDO13 {
+					regulator-name = "VDDIOPERI_18";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo14_reg: LDO14 {
+					regulator-name = "VDD18_ABB02";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo15_reg: LDO15 {
+					regulator-name = "VDD10_USH";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo16_reg: LDO16 {
+					regulator-name = "VDD18_HSIC";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo17_reg: LDO17 {
+					regulator-name = "VDDIOAP_MMC012_28";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo18_reg: LDO18 {
+					regulator-name = "VDDIOPERI_28";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo19_reg: LDO19 {
+					regulator-name = "DVDD25";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo20_reg: LDO20 {
+					regulator-name = "VDD28_CAM";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo21_reg: LDO21 {
+					regulator-name = "VDD28_AF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo22_reg: LDO22 {
+					regulator-name = "VDDA28_2M";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo23_reg: LDO23 {
+					regulator-name = "VDD28_TF";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo24_reg: LDO24 {
+					regulator-name = "VDD33_A31";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo25_reg: LDO25 {
+					regulator-name = "VDD18_CAM";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo26_reg: LDO26 {
+					regulator-name = "VDD18_A31";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo27_reg: LDO27 {
+					regulator-name = "GPS_1V8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				ldo28_reg: LDO28 {
+					regulator-name = "DVDD12";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck1_reg: BUCK1 {
+					regulator-name = "vdd_mif";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt	= <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck2_reg: BUCK2 {
+					regulator-name = "vdd_arm";
+					regulator-min-microvolt = <925000>;
+					regulator-max-microvolt	= <1300000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck3_reg: BUCK3 {
+					regulator-name = "vdd_int";
+					regulator-min-microvolt = <900000>;
+					regulator-max-microvolt	= <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck4_reg: BUCK4 {
+					regulator-name = "vdd_g3d";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck5_reg: BUCK5 {
+					regulator-name = "vdd_m12";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck6_reg: BUCK6 {
+					regulator-name = "vdd12_5m";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+
+				buck9_reg: BUCK9 {
+					regulator-name = "vddf28_emmc";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt	= <3000000>;
+					regulator-always-on;
+					regulator-boot-on;
+					op_mode = <1>; /* Normal Mode */
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -27,6 +27,19 @@
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};

+	sdhci@12530000 {
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	codec@13400000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+		status = "okay";
+	};
+
 	serial@13800000 {
 		status = "okay";
 	};
@@ -42,4 +55,16 @@
 	serial@13830000 {
 		status = "okay";
 	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -25,4 +25,30 @@
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x4000>;
 	};
+
+	mct@10050000 {
+		compatible = "samsung,exynos4412-mct";
+		reg = <0x10050000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>, <6 0>, <7 0>;
+		clocks = <&clock 3>, <&clock 344>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &gic 0 57 0>,
+					<0x1 0 &combiner 12 5>,
+					<0x2 0 &combiner 12 6>,
+					<0x3 0 &combiner 12 7>,
+					<0x4 0 &gic 1 12 0>,
+					<0x5 0 &gic 1 12 0>,
+					<0x6 0 &gic 1 12 0>,
+					<0x7 0 &gic 1 12 0>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -36,6 +36,12 @@
 			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
 	};

+	clock: clock-controller@0x10030000 {
+		compatible = "samsung,exynos4412-clock";
+		reg = <0x10030000 0x20000>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl_0: pinctrl@11400000 {
 		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;

--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+	model = "Insignal Arndale evaluation board based on EXYNOS5250";
+	compatible = "insignal,arndale", "samsung,exynos5250";
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttySAC2,115200";
+	};
+
+	i2c@12C60000 {
+		status = "disabled";
+	};
+
+	i2c@12C70000 {
+		status = "disabled";
+	};
+
+	i2c@12C80000 {
+		status = "disabled";
+	};
+
+	i2c@12C90000 {
+		status = "disabled";
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		status = "disabled";
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		status = "disabled";
+	};
+
+	i2c@121D0000 {
+		status = "disabled";
+	};
+
+	dwmmc_0: dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>,
+				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>;
+		};
+	};
+
+	dwmmc_1: dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc_2: dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+		};
+	};
+
+	dwmmc_3: dwmmc3@12230000 {
+		status = "disabled";
+	};
+
+	spi_0: spi@12d20000 {
+		status = "disabled";
+	};
+
+	spi_1: spi@12d30000 {
+		status = "disabled";
+	};
+
+	spi_2: spi@12d40000 {
+		status = "disabled";
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+};
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -231,4 +231,24 @@
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&wm8994>;
 	};
+
+	usb@12110000 {
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+	};
+
+	dp-controller {
+		samsung,color-space = <0>;
+		samsung,dynamic-range = <0>;
+		samsung,ycbcr-coeff = <0>;
+		samsung,color-depth = <1>;
+		samsung,link-rate = <0x0a>;
+		samsung,lane-count = <4>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -40,4 +40,15 @@
 				<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
 		};
 	};
+
+	usb@12110000 {
+		samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -46,6 +46,22 @@
 		i2c8 = &i2c_8;
 	};

+	pd_gsc: gsc-power-domain@0x10044000 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044000 0x20>;
+	};
+
+	pd_mfc: mfc-power-domain@0x10044040 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10044040 0x20>;
+	};
+
+	clock: clock-controller@0x10010000 {
+		compatible = "samsung,exynos5250-clock";
+		reg = <0x10010000 0x30000>;
+		#clock-cells = <1>;
+	};
+
 	gic:interrupt-controller@10481000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
@@ -69,58 +85,106 @@
 			     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
 	};

+	mct@101C0000 {
+		compatible = "samsung,exynos4210-mct";
+		reg = <0x101C0000 0x800>;
+		interrupt-controller;
+		#interrups-cells = <2>;
+		interrupt-parent = <&mct_map>;
+		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+			     <4 0>, <5 0>;
+		clocks = <&clock 1>, <&clock 335>;
+		clock-names = "fin_pll", "mct";
+
+		mct_map: mct-map {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <0x0 0 &combiner 23 3>,
+					<0x1 0 &combiner 23 4>,
+					<0x2 0 &combiner 25 2>,
+					<0x3 0 &combiner 25 3>,
+					<0x4 0 &gic 0 120 0>,
+					<0x5 0 &gic 0 121 0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <1 2>, <22 4>;
+	};
+
 	watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x101D0000 0x100>;
 		interrupts = <0 42 0>;
+		clocks = <&clock 336>;
+		clock-names = "watchdog";
 	};

 	codec@11000000 {
 		compatible = "samsung,mfc-v6";
 		reg = <0x11000000 0x10000>;
 		interrupts = <0 96 0>;
+		samsung,power-domain = <&pd_mfc>;
 	};

 	rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;
+		clocks = <&clock 337>;
+		clock-names = "rtc";
+		status = "disabled";
 	};

 	tmu@10060000 {
 		compatible = "samsung,exynos5250-tmu";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 65 0>;
+		clocks = <&clock 338>;
+		clock-names = "tmu_apbif";
 	};

 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
 		interrupts = <0 51 0>;
+		clocks = <&clock 289>, <&clock 146>;
+		clock-names = "uart", "clk_uart_baud0";
 	};

 	serial@12C10000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C10000 0x100>;
 		interrupts = <0 52 0>;
+		clocks = <&clock 290>, <&clock 147>;
+		clock-names = "uart", "clk_uart_baud0";
 	};

 	serial@12C20000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C20000 0x100>;
 		interrupts = <0 53 0>;
+		clocks = <&clock 291>, <&clock 148>;
+		clock-names = "uart", "clk_uart_baud0";
 	};

 	serial@12C30000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C30000 0x100>;
 		interrupts = <0 54 0>;
+		clocks = <&clock 292>, <&clock 149>;
+		clock-names = "uart", "clk_uart_baud0";
 	};

 	sata@122F0000 {
 		compatible = "samsung,exynos5-sata-ahci";
 		reg = <0x122F0000 0x1ff>;
 		interrupts = <0 115 0>;
+		clocks = <&clock 277>, <&clock 143>;
+		clock-names = "sata", "sclk_sata";
 	};

 	sata-phy@12170000 {
@@ -134,6 +198,8 @@
 		interrupts = <0 56 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 294>;
+		clock-names = "i2c";
 	};

 	i2c_1: i2c@12C70000 {
@@ -142,6 +208,8 @@
 		interrupts = <0 57 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 295>;
+		clock-names = "i2c";
 	};

 	i2c_2: i2c@12C80000 {
@@ -150,6 +218,8 @@
 		interrupts = <0 58 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 296>;
+		clock-names = "i2c";
 	};

 	i2c_3: i2c@12C90000 {
@@ -158,6 +228,8 @@
 		interrupts = <0 59 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 297>;
+		clock-names = "i2c";
 	};

 	i2c_4: i2c@12CA0000 {
@@ -166,6 +238,8 @@
 		interrupts = <0 60 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 298>;
+		clock-names = "i2c";
 	};

 	i2c_5: i2c@12CB0000 {
@@ -174,6 +248,8 @@
 		interrupts = <0 61 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 299>;
+		clock-names = "i2c";
 	};

 	i2c_6: i2c@12CC0000 {
@@ -182,6 +258,8 @@
 		interrupts = <0 62 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 300>;
+		clock-names = "i2c";
 	};

 	i2c_7: i2c@12CD0000 {
@@ -190,6 +268,8 @@
 		interrupts = <0 63 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 301>;
+		clock-names = "i2c";
 	};

 	i2c_8: i2c@12CE0000 {
@@ -198,6 +278,8 @@
 		interrupts = <0 64 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 302>;
+		clock-names = "i2c";
 	};

 	i2c@121D0000 {
@@ -205,6 +287,8 @@
                reg = <0x121D0000 0x100>;
                #address-cells = <1>;
                #size-cells = <0>;
+		clocks = <&clock 288>;
+		clock-names = "i2c";
 	};

 	spi_0: spi@12d20000 {
@@ -216,6 +300,8 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 304>, <&clock 154>;
+		clock-names = "spi", "spi_busclk0";
 	};

 	spi_1: spi@12d30000 {
@@ -227,6 +313,8 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 305>, <&clock 155>;
+		clock-names = "spi", "spi_busclk0";
 	};

 	spi_2: spi@12d40000 {
@@ -238,6 +326,8 @@
 		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 306>, <&clock 156>;
+		clock-names = "spi", "spi_busclk0";
 	};

 	dwmmc_0: dwmmc0@12200000 {
@@ -246,6 +336,8 @@
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 280>, <&clock 139>;
+		clock-names = "biu", "ciu";
 	};

 	dwmmc_1: dwmmc1@12210000 {
@@ -254,6 +346,8 @@
 		interrupts = <0 76 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 281>, <&clock 140>;
+		clock-names = "biu", "ciu";
 	};

 	dwmmc_2: dwmmc2@12220000 {
@@ -262,6 +356,8 @@
 		interrupts = <0 77 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 282>, <&clock 141>;
+		clock-names = "biu", "ciu";
 	};

 	dwmmc_3: dwmmc3@12230000 {
@@ -270,6 +366,8 @@
 		interrupts = <0 78 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 283>, <&clock 142>;
+		clock-names = "biu", "ciu";
 	};

 	i2s0: i2s@03830000 {
@@ -301,6 +399,18 @@
 		dma-names = "tx", "rx";
 	};

+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+	};
+
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+	};
+
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -312,6 +422,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 275>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -321,6 +433,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 276>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -330,6 +444,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <0 33 0>;
+			clocks = <&clock 271>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
@@ -339,6 +455,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <0 124 0>;
+			clocks = <&clock 271>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <1>;
@@ -592,34 +710,51 @@
 		};
 	};

+
 	gsc_0:  gsc@0x13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 256>;
+		clock-names = "gscl";
 	};

 	gsc_1:  gsc@0x13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 257>;
+		clock-names = "gscl";
 	};

 	gsc_2:  gsc@0x13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 258>;
+		clock-names = "gscl";
 	};

 	gsc_3:  gsc@0x13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
+		samsung,power-domain = <&pd_gsc>;
+		clocks = <&clock 259>;
+		clock-names = "gscl";
 	};

 	hdmi {
 		compatible = "samsung,exynos5-hdmi";
 		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
+		clocks = <&clock 333>, <&clock 136>, <&clock 137>,
+				<&clock 333>, <&clock 333>;
+		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "hdmiphy";
 	};

 	mixer {
@@ -627,4 +762,18 @@
 		reg = <0x14450000 0x10000>;
 		interrupts = <0 94 0>;
 	};
+
+	dp-controller {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x1000>;
+		interrupts = <10 3>;
+		interrupt-parent = <&combiner>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dptx-phy {
+			reg = <0x10040720>;
+			samsung,enable-mask = <1>;
+		};
+	};
 };
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -28,19 +28,10 @@
 		status = "disabled";
 	};

-	i2c@F0000 {
-		status = "disabled";
-	};
-
-	i2c@100000 {
-		status = "disabled";
-	};
-
-	watchdog {
-		status = "disabled";
-	};
-
-	rtc {
-		status = "disabled";
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
+		};
 	};
 };
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -16,6 +16,12 @@

 	interrupt-parent = <&gic>;

+	clock: clock-controller@0x160000 {
+		compatible = "samsung,exynos5440-clock";
+		reg = <0x160000 0x1000>;
+		#clock-cells = <1>;
+	};
+
 	gic:interrupt-controller@2E0000 {
 		compatible = "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
@@ -24,55 +30,51 @@
 	};

 	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
 		cpu@0 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 13 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <0>;
 		};
 		cpu@1 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <1>;
 		};
 		cpu@2 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <2>;
 		};
 		cpu@3 {
 			compatible = "arm,cortex-a15";
-			timer {
-				compatible = "arm,armv7-timer";
-				interrupts = <1 14 0xf08>;
-				clock-frequency = <1000000>;
-			};
+			reg = <3>;
 		};
 	};

-	common {
-		compatible = "samsung,exynos5440";
-
+	timer {
+		compatible = "arm,cortex-a15-timer",
+			     "arm,armv7-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		clock-frequency = <50000000>;
 	};

 	serial@B0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xB0000 0x1000>;
 		interrupts = <0 2 0>;
+		clocks = <&clock 21>, <&clock 21>;
+		clock-names = "uart", "clk_uart_baud0";
 	};

 	serial@C0000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0xC0000 0x1000>;
 		interrupts = <0 3 0>;
+		clocks = <&clock 21>, <&clock 21>;
+		clock-names = "uart", "clk_uart_baud0";
 	};

 	spi {
@@ -83,6 +85,8 @@
 		rx-dma-channel = <&pdma0 4>; /* preliminary */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>, <&clock 16>;
+		clock-names = "spi", "spi_busclk0";
 	};

 	pinctrl {
@@ -110,25 +114,31 @@
 	};

 	i2c@F0000 {
-		compatible = "samsung,s3c2440-i2c";
+		compatible = "samsung,exynos5440-i2c";
 		reg = <0xF0000 0x1000>;
 		interrupts = <0 5 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>;
+		clock-names = "i2c";
 	};

 	i2c@100000 {
-		compatible = "samsung,s3c2440-i2c";
+		compatible = "samsung,exynos5440-i2c";
 		reg = <0x100000 0x1000>;
 		interrupts = <0 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clocks = <&clock 21>;
+		clock-names = "i2c";
 	};

 	watchdog {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x110000 0x1000>;
 		interrupts = <0 1 0>;
+		clocks = <&clock 21>;
+		clock-names = "watchdog";
 	};

 	amba {
@@ -142,6 +152,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x120000 0x1000>;
 			interrupts = <0 34 0>;
+			clocks = <&clock 21>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -151,6 +163,8 @@
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121000 0x1000>;
 			interrupts = <0 35 0>;
+			clocks = <&clock 21>;
+			clock-names = "apb_pclk";
 			#dma-cells = <1>;
 			#dma-channels = <8>;
 			#dma-requests = <32>;
@@ -161,5 +175,8 @@
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
 		interrupts = <0 17 0>, <0 16 0>;
+		clocks = <&clock 21>;
+		clock-names = "rtc";
+		status = "disabled";
 	};
 };
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -38,6 +38,57 @@
 		};
 	};

+	/* HS USB Port 2 RESET */
+	hsusb2_reset: hsusb2_reset_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_reset";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 19 0>;	/* gpio_147 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	/* HS USB Port 2 Power */
+	hsusb2_power: hsusb2_power_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "hsusb2_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&twl_gpio 18 0>;	/* GPIO LEDA */
+		startup-delay-us = <70000>;
+	};
+
+	/* HS USB Host PHY on PORT 2 */
+	hsusb2_phy: hsusb2_phy {
+		compatible = "usb-nop-xceiv";
+		reset-supply = <&hsusb2_reset>;
+		vcc-supply = <&hsusb2_power>;
+	};
+};
+
+&omap3_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&hsusbb2_pins
+	>;
+
+	hsusbb2_pins: pinmux_hsusbb2_pins {
+		pinctrl-single,pins = <
+			0x5c0 0x3  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
+			0x5c2 0x3  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
+			0x5c4 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
+			0x5c6 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
+			0x5c8 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
+			0x5cA 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
+			0x1a4 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
+			0x1a6 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
+			0x1a8 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
+			0x1aa 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
+			0x1ac 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
+			0x1ae 0x10b  /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+		>;
+	};
 };

 &i2c1 {
@@ -65,3 +116,23 @@
 &mmc3 {
 	status = "disabled";
 };
+
+&usbhshost {
+	port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+	ti,use-leds;
+	/* pullups: BIT(1) */
+	ti,pullups = <0x000002>;
+	/*
+	 * pulldowns:
+	 * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+	 * BIT(15), BIT(16), BIT(17)
+	 */
+	ti,pulldowns = <0x03a1c4>;
+};
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -397,5 +397,36 @@
 			ti,timer-alwon;
 			ti,timer-secure;
 		};
+
+		usbhstll: usbhstll@48062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x48062000 0x1000>;
+			interrupts = <78>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@48064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x48064000 0x400>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbhsohci: ohci@48064400 {
+				compatible = "ti,ohci-omap3", "usb-ohci";
+				reg = <0x48064400 0x400>;
+				interrupt-parent = <&intc>;
+				interrupts = <76>;
+			};
+
+			usbhsehci: ehci@48064800 {
+				compatible = "ti,ehci-omap", "usb-ehci";
+				reg = <0x48064800 0x400>;
+				interrupt-parent = <&intc>;
+				interrupts = <77>;
+			};
+		};
+
 	};
 };
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -529,5 +529,35 @@
 			ti,hwmods = "timer11";
 			ti,timer-pwm;
 		};
+
+		usbhstll: usbhstll@4a062000 {
+			compatible = "ti,usbhs-tll";
+			reg = <0x4a062000 0x1000>;
+			interrupts = <0 78 0x4>;
+			ti,hwmods = "usb_tll_hs";
+		};
+
+		usbhshost: usbhshost@4a064000 {
+			compatible = "ti,usbhs-host";
+			reg = <0x4a064000 0x800>;
+			ti,hwmods = "usb_host_hs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbhsohci: ohci@4a064800 {
+				compatible = "ti,ohci-omap3", "usb-ohci";
+				reg = <0x4a064800 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 76 0x4>;
+			};
+
+			usbhsehci: ehci@4a064c00 {
+				compatible = "ti,ehci-omap", "usb-ehci";
+				reg = <0x4a064c00 0x400>;
+				interrupt-parent = <&gic>;
+				interrupts = <0 77 0x4>;
+			};
+		};
 	};
 };
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -12,7 +12,6 @@

 	serial@70006300 {
 		status = "okay";
-		clock-frequency = <408000000>;
 	};

 	pmc {

--- a/arch/arm/boot/dts/tegra114-pluto.dts
+++ b/arch/arm/boot/dts/tegra114-pluto.dts
@@ -12,7 +12,6 @@

 	serial@70006300 {
 		status = "okay";
-		clock-frequency = <408000000>;
 	};

 	pmc {

--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -24,10 +24,11 @@
 			      0 42 0x04
 			      0 121 0x04
 			      0 122 0x04>;
+		clocks = <&tegra_car 5>;
 	};

 	tegra_car: clock {
-		compatible = "nvidia,tegra114-car, nvidia,tegra30-car";
+		compatible = "nvidia,tegra114-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
 	};
@@ -66,6 +67,7 @@
 		reg-shift = <2>;
 		interrupts = <0 36 0x04>;
 		status = "disabled";
+		clocks = <&tegra_car 6>;
 	};

 	serial@70006040 {
@@ -74,6 +76,7 @@
 		reg-shift = <2>;
 		interrupts = <0 37 0x04>;
 		status = "disabled";
+		clocks = <&tegra_car 192>;
 	};

 	serial@70006200 {
@@ -82,6 +85,7 @@
 		reg-shift = <2>;
 		interrupts = <0 46 0x04>;
 		status = "disabled";
+		clocks = <&tegra_car 55>;
 	};

 	serial@70006300 {
@@ -90,12 +94,14 @@
 		reg-shift = <2>;
 		interrupts = <0 90 0x04>;
 		status = "disabled";
+		clocks = <&tegra_car 65>;
 	};

 	rtc {
 		compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
 		reg = <0x7000e000 0x100>;
 		interrupts = <0 2 0x04>;
+		clocks = <&tegra_car 4>;
 	};

 	pmc {

--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -25,11 +25,13 @@
 			#interrupt-cells = <1>;
 		};

-		gpio: gpio-controller@d8110000 {
-			compatible = "via,vt8500-gpio";
-			gpio-controller;
+		pinctrl: pinctrl@d8110000 {
+			compatible = "via,vt8500-pinctrl";
 			reg = <0xd8110000 0x10000>;
-			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};

 		pmc@d8130000 {

--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -40,11 +40,13 @@
 			interrupts = <56 57 58 59 60 61 62 63>;
 		};

-		gpio: gpio-controller@d8110000 {
-			compatible = "wm,wm8505-gpio";
-			gpio-controller;
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8505-pinctrl";
 			reg = <0xd8110000 0x10000>;
-			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};

 		pmc@d8130000 {

--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -34,11 +34,13 @@
 			interrupts = <56 57 58 59 60 61 62 63>;
 		};

-		gpio: gpio-controller@d8110000 {
-			compatible = "wm,wm8650-gpio";
-			gpio-controller;
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8650-pinctrl";
 			reg = <0xd8110000 0x10000>;
-			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};

 		pmc@d8130000 {

--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -41,11 +41,13 @@
 			interrupts = <56 57 58 59 60 61 62 63>;
 		};

-		gpio: gpio-controller@d8110000 {
-			compatible = "wm,wm8650-gpio";
-			gpio-controller;
+		pinctrl: pinctrl@d8110000 {
+			compatible = "wm,wm8850-pinctrl";
 			reg = <0xd8110000 0x10000>;
-			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};

 		pmc@d8130000 {

--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -118,56 +118,23 @@
 		};

 		ttc0: ttc0@f8001000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "xlnx,ttc";
+			interrupt-parent = <&intc>;
+			interrupts = < 0 10 4 0 11 4 0 12 4 >;
+			compatible = "cdns,ttc";
 			reg = <0xF8001000 0x1000>;
 			clocks = <&cpu_clk 3>;
 			clock-names = "cpu_1x";
 			clock-ranges;
-
-			ttc0_0: ttc0.0 {
-				status = "disabled";
-				reg = <0>;
-				interrupts = <0 10 4>;
-			};
-			ttc0_1: ttc0.1 {
-				status = "disabled";
-				reg = <1>;
-				interrupts = <0 11 4>;
-			};
-			ttc0_2: ttc0.2 {
-				status = "disabled";
-				reg = <2>;
-				interrupts = <0 12 4>;
-			};
 		};

 		ttc1: ttc1@f8002000 {
-			#interrupt-parent = <&intc>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "xlnx,ttc";
+			interrupt-parent = <&intc>;
+			interrupts = < 0 37 4 0 38 4 0 39 4 >;
+			compatible = "cdns,ttc";
 			reg = <0xF8002000 0x1000>;
 			clocks = <&cpu_clk 3>;
 			clock-names = "cpu_1x";
 			clock-ranges;
-
-			ttc1_0: ttc1.0 {
-				status = "disabled";
-				reg = <0>;
-				interrupts = <0 37 4>;
-			};
-			ttc1_1: ttc1.1 {
-				status = "disabled";
-				reg = <1>;
-				interrupts = <0 38 4>;
-			};
-			ttc1_2: ttc1.2 {
-				status = "disabled";
-				reg = <2>;
-				interrupts = <0 39 4>;
-			};
 		};
 	};
 };
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -32,13 +32,3 @@
 &ps_clk {
 	clock-frequency = <33333330>;
 };
-
-&ttc0_0 {
-	status = "ok";
-	compatible = "xlnx,ttc-counter-clocksource";
-};
-
-&ttc0_1 {
-	status = "ok";
-	compatible = "xlnx,ttc-counter-clockevent";
-};
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -169,6 +169,8 @@ static struct clk *periph_clocks[] __initdata = {
 };

 static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1),
+	CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),

--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -488,7 +488,6 @@ static struct resource lcdc_resources[] = {
 };

 static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &lcdc_dmamask,
@@ -505,6 +504,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 		return;
 	}

+	if (cpu_is_at91sam9g10())
+		at91_lcdc_device.name = "at91sam9g10-lcdfb";
+	else
+		at91_lcdc_device.name = "at91sam9261-lcdfb";
+
 #if defined(CONFIG_FB_ATMEL_STN)
 	at91_set_A_periph(AT91_PIN_PB0, 0);     /* LCDVSYNC */
 	at91_set_A_periph(AT91_PIN_PB1, 0);     /* LCDHSYNC */

--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -190,6 +190,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),

--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -848,7 +848,7 @@ static struct resource lcdc_resources[] = {
 };

 static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
+	.name		= "at91sam9263-lcdfb",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &lcdc_dmamask,

--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -228,6 +228,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_ID("hclk", &macb_clk),
 	/* One additional fake clock for ohci */
 	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
+	CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
 	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
 	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
 	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),

--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -981,7 +981,6 @@ static struct resource lcdc_resources[] = {
 };

 static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &lcdc_dmamask,
@@ -997,6 +996,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
 	if (!data)
 		return;

+	if (cpu_is_at91sam9g45es())
+		at91_lcdc_device.name = "at91sam9g45es-lcdfb";
+	else
+		at91_lcdc_device.name = "at91sam9g45-lcdfb";
+
 	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */

 	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */

--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -179,6 +179,7 @@ static struct clk *periph_clocks[] __initdata = {
 };

 static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
 	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
 	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),

--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -514,7 +514,7 @@ static struct resource lcdc_resources[] = {
 };

 static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
+	.name		= "at91sam9rl-lcdfb",
 	.id		= 0,
 	.dev		= {
 				.dma_mask		= &lcdc_dmamask,

--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -63,6 +63,7 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select S5P_DEV_MFC
@@ -83,12 +84,6 @@ config SOC_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support

-config EXYNOS4_MCT
-	bool
-	default y
-	help
-	  Use MCT (Multi Core Timer) as kernel timers
-
 config EXYNOS_ATAGS
 	bool "ATAGS based boot for EXYNOS (deprecated)"
 	depends on !ARCH_MULTIPLATFORM
@@ -285,8 +280,8 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select S5P_GPIO_INT
-	select S5P_HRT
 	select S5P_SETUP_MIPIPHY
+	select SAMSUNG_HRT
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -414,10 +409,12 @@ config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
 	depends on ARCH_EXYNOS4
 	select ARM_AMBA
+	select CLKSRC_OF
 	select CPU_EXYNOS4210
 	select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
 	select PINCTRL
 	select PINCTRL_EXYNOS
+	select S5P_DEV_MFC
 	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.
@@ -430,6 +427,7 @@ config MACH_EXYNOS5_DT
 	default y
 	depends on ARCH_EXYNOS5
 	select ARM_AMBA
+	select CLKSRC_OF
 	select USE_OF
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.

--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -13,10 +13,6 @@ obj-				:=
 # Core

 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= clock-exynos4.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
-obj-$(CONFIG_SOC_EXYNOS5250)	+= clock-exynos5.o

 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
@@ -26,8 +22,6 @@ obj-$(CONFIG_ARCH_EXYNOS)	+= pmu.o

 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o

-obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
-
 obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o

 # machine support

--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
--- a/arch/arm/mach-exynos/clock-exynos4.h
+++ b/arch/arm/mach-exynos/clock-exynos4.h
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk exynos4_clk_aclk_133;
-extern struct clksrc_clk exynos4_clk_mout_mpll;
-
-extern struct clksrc_sources exynos4_clkset_mout_corebus;
-extern struct clksrc_sources exynos4_clkset_group;
-
-extern struct clk *exynos4_clkset_aclk_top_list[];
-extern struct clk *exynos4_clkset_group_list[];
-
-extern struct clksrc_sources exynos4_clkset_mout_g2d0;
-extern struct clksrc_sources exynos4_clkset_mout_g2d1;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4210_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
-	SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clksrc_clk *sysclks[] = {
-	/* nothing here yet */
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d0 = {
-	.clk	= {
-		.name		= "mout_g2d0",
-	},
-	.sources = &exynos4_clkset_mout_g2d0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d1 = {
-	.clk	= {
-		.name		= "mout_g2d1",
-	},
-	.sources = &exynos4_clkset_mout_g2d1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4210_clkset_mout_g2d_list[] = {
-	[0] = &exynos4210_clk_mout_g2d0.clk,
-	[1] = &exynos4210_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4210_clkset_mout_g2d = {
-	.sources	= exynos4210_clkset_mout_g2d_list,
-	.nr_sources	= ARRAY_SIZE(exynos4210_clkset_mout_g2d_list),
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk		= {
-			.name		= "sclk_sata",
-			.id		= -1,
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &exynos4_clkset_mout_corebus,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &exynos4_clkset_group,
-		.reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_fimg2d",
-		},
-		.sources = &exynos4210_clkset_mout_g2d,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
-	},
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sataphy",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sata",
-		.id		= -1,
-		.parent		= &exynos4_clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.9",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.11",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "fimg2d",
-		.enable		= exynos4_clk_ip_image_ctrl,
-		.ctrlbit	= (1 << 0),
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
-	return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4210_clock_syscore_ops = {
-	.suspend	= exynos4210_clock_suspend,
-	.resume		= exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
-	int ptr;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
-	exynos4_clk_mout_mpll.reg_src.shift = 8;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4210_clock_syscore_ops);
-}
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4212 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4212_clock_save[] = {
-	SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
-	SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
-	SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
-};
-#endif
-
-static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static struct clk *clk_src_mpll_user_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_mpll_user = {
-	.sources	= clk_src_mpll_user_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk clk_mout_mpll_user = {
-	.clk = {
-		.name		= "mout_mpll_user",
-	},
-	.sources	= &clk_src_mpll_user,
-	.reg_src	= { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d0 = {
-	.clk	= {
-		.name		= "mout_g2d0",
-	},
-	.sources = &exynos4_clkset_mout_g2d0,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d1 = {
-	.clk	= {
-		.name		= "mout_g2d1",
-	},
-	.sources = &exynos4_clkset_mout_g2d1,
-	.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos4x12_clkset_mout_g2d_list[] = {
-	[0] = &exynos4x12_clk_mout_g2d0.clk,
-	[1] = &exynos4x12_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4x12_clkset_mout_g2d = {
-	.sources	= exynos4x12_clkset_mout_g2d_list,
-	.nr_sources	= ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list),
-};
-
-static struct clksrc_clk *sysclks[] = {
-	&clk_mout_mpll_user,
-};
-
-static struct clksrc_clk clksrcs[] = {
-	{
-		.clk	= {
-			.name		= "sclk_fimg2d",
-		},
-		.sources = &exynos4x12_clkset_mout_g2d,
-		.reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 },
-		.reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 },
-	},
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.9",
-		.enable		= exynos4_clk_ip_dmc_ctrl,
-		.ctrlbit	= (1 << 24),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.12",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (7 << 8),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.13",
-		.enable		= exynos4212_clk_ip_isp1_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.14",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 11),
-	}, {
-		.name		= "sysmmu",
-		.devname	= "exynos-sysmmu.15",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 12),
-	}, {
-		.name		= "flite",
-		.devname	= "exynos-fimc-lite.0",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 4),
-	}, {
-		.name		= "flite",
-		.devname	= "exynos-fimc-lite.1",
-		.enable		= exynos4212_clk_ip_isp0_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
-		.name		= "fimg2d",
-		.enable		= exynos4_clk_ip_dmc_ctrl,
-		.ctrlbit	= (1 << 23),
-	},
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4212_clock_suspend(void)
-{
-	s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-
-	return 0;
-}
-
-static void exynos4212_clock_resume(void)
-{
-	s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-}
-
-#else
-#define exynos4212_clock_suspend NULL
-#define exynos4212_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4212_clock_syscore_ops = {
-	.suspend	= exynos4212_clock_suspend,
-	.resume		= exynos4212_clock_resume,
-};
-
-void __init exynos4212_register_clocks(void)
-{
-	int ptr;
-
-	/* usbphy1 is removed */
-	exynos4_clkset_group_list[4] = NULL;
-
-	/* mout_mpll_user is used */
-	exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
-	exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
-
-	exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
-	exynos4_clk_mout_mpll.reg_src.shift = 12;
-	exynos4_clk_mout_mpll.reg_src.size = 1;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
-		s3c_register_clksrc(sysclks[ptr], 1);
-
-	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	register_syscore_ops(&exynos4212_clock_syscore_ops);
-}
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -24,6 +24,8 @@
 #include <linux/export.h>
 #include <linux/irqdomain.h>
 #include <linux/of_address.h>
+#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
 #include <linux/irqchip/arm-gic.h>
 #include <linux/irqchip/chained_irq.h>

@@ -37,9 +39,9 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 #include <mach/regs-gpio.h>
+#include <mach/irqs.h>

 #include <plat/cpu.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
 #include <plat/sdhci.h>
@@ -65,17 +67,16 @@ static const char name_exynos5440[] = "EXYNOS5440";
 static void exynos4_map_io(void);
 static void exynos5_map_io(void);
 static void exynos5440_map_io(void);
-static void exynos4_init_clocks(int xtal);
-static void exynos5_init_clocks(int xtal);
 static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 static int exynos_init(void);

+unsigned long xxti_f = 0, xusbxti_f = 0;
+
 static struct cpu_table cpu_ids[] __initdata = {
 	{
 		.idcode		= EXYNOS4210_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4210,
@@ -83,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS4212_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4212,
@@ -91,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS4412_CPU_ID,
 		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
-		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos_init,
 		.name		= name_exynos4412,
@@ -99,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= EXYNOS5250_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
 		.map_io		= exynos5_map_io,
-		.init_clocks	= exynos5_init_clocks,
 		.init		= exynos_init,
 		.name		= name_exynos5250,
 	}, {
@@ -256,11 +254,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SROMC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_SYSRAM,
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_SYSRAM),
@@ -402,43 +395,26 @@ static void __init exynos5_map_io(void)
 	iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
 }

-static void __init exynos4_init_clocks(int xtal)
-{
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	if (soc_is_exynos4210())
-		exynos4210_register_clocks();
-	else if (soc_is_exynos4212() || soc_is_exynos4412())
-		exynos4212_register_clocks();
-
-	exynos4_register_clocks();
-	exynos4_setup_clocks();
-}
-
 static void __init exynos5440_map_io(void)
 {
 	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
 }

-static void __init exynos5_init_clocks(int xtal)
+void __init exynos_init_time(void)
 {
-	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
-	/* EXYNOS5440 can support only common clock framework */
-
-	if (soc_is_exynos5440())
-		return;
-
-#ifdef CONFIG_SOC_EXYNOS5250
-	s3c24xx_register_baseclocks(xtal);
-	s5p_register_clocks(xtal);
-
-	exynos5_register_clocks();
-	exynos5_setup_clocks();
+	if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
+		of_clk_init(NULL);
+		clocksource_of_init();
+#endif
+	} else {
+		/* todo: remove after migrating legacy E4 platforms to dt */
+#ifdef CONFIG_ARCH_EXYNOS4
+		exynos4_clk_init(NULL);
+		exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
 #endif
+		mct_init();
+	}
 }

 void __init exynos4_init_irq(void)
@@ -824,6 +800,7 @@ static int __init exynos_init_irq_eint(void)
 	static const struct of_device_id exynos_pinctrl_ids[] = {
 		{ .compatible = "samsung,exynos4210-pinctrl", },
 		{ .compatible = "samsung,exynos4x12-pinctrl", },
+		{ .compatible = "samsung,exynos5250-pinctrl", },
 	};
 	struct device_node *pctrl_np, *wkup_np;
 	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
@@ -877,3 +854,30 @@ static int __init exynos_init_irq_eint(void)
 	return 0;
 }
 arch_initcall(exynos_init_irq_eint);
+
+static struct resource exynos4_pmu_resource[] = {
+	DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU),
+	DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU1),
+#if defined(CONFIG_SOC_EXYNOS4412)
+	DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU2),
+	DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU3),
+#endif
+};
+
+static struct platform_device exynos4_device_pmu = {
+	.name		= "arm-pmu",
+	.num_resources	= ARRAY_SIZE(exynos4_pmu_resource),
+	.resource	= exynos4_pmu_resource,
+};
+
+static int __init exynos_armpmu_init(void)
+{
+	if (!of_have_populated_dt()) {
+		if (soc_is_exynos4210() || soc_is_exynos4212())
+			exynos4_device_pmu.num_resources = 2;
+		platform_device_register(&exynos4_device_pmu);
+	}
+
+	return 0;
+}
+arch_initcall(exynos_armpmu_init);
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,7 +12,11 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H

-extern void exynos4_timer_init(void);
+#include <linux/of.h>
+
+extern void mct_init(void);
+void exynos_init_time(void);
+extern unsigned long xxti_f, xusbxti_f;

 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);
@@ -22,6 +26,10 @@ void exynos4_restart(char mode, const char *cmd);
 void exynos5_restart(char mode, const char *cmd);
 void exynos_init_late(void);

+/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
+void exynos4_clk_init(struct device_node *np);
+void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
+
 #ifdef CONFIG_PM_GENERIC_DOMAINS
 int exynos_pm_late_initcall(void);
 #else

--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -30,8 +30,6 @@

 /* For EXYNOS4 and EXYNOS5 */

-#define EXYNOS_IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
-
 #define EXYNOS_IRQ_EINT16_31		IRQ_SPI(32)

 /* For EXYNOS4 SoCs */
@@ -128,7 +126,7 @@
 #define EXYNOS4_IRQ_ADC1		IRQ_SPI(107)
 #define EXYNOS4_IRQ_PEN1		IRQ_SPI(108)
 #define EXYNOS4_IRQ_KEYPAD		IRQ_SPI(109)
-#define EXYNOS4_IRQ_PMU			IRQ_SPI(110)
+#define EXYNOS4_IRQ_POWER_PMU		IRQ_SPI(110)
 #define EXYNOS4_IRQ_GPS			IRQ_SPI(111)
 #define EXYNOS4_IRQ_INTFEEDCTRL_SSS	IRQ_SPI(112)
 #define EXYNOS4_IRQ_SLIMBUS		IRQ_SPI(113)
@@ -136,6 +134,11 @@
 #define EXYNOS4_IRQ_TSI			IRQ_SPI(115)
 #define EXYNOS4_IRQ_SATA		IRQ_SPI(116)

+#define EXYNOS4_IRQ_PMU			COMBINER_IRQ(2, 2)
+#define EXYNOS4_IRQ_PMU_CPU1		COMBINER_IRQ(3, 2)
+#define EXYNOS4_IRQ_PMU_CPU2		COMBINER_IRQ(18, 2)
+#define EXYNOS4_IRQ_PMU_CPU3		COMBINER_IRQ(19, 2)
+
 #define EXYNOS4_IRQ_TMU_TRIG0		COMBINER_IRQ(2, 4)
 #define EXYNOS4_IRQ_TMU_TRIG1		COMBINER_IRQ(3, 4)

@@ -168,7 +171,10 @@
 #define EXYNOS4_IRQ_FIMD0_VSYNC		COMBINER_IRQ(11, 1)
 #define EXYNOS4_IRQ_FIMD0_SYSTEM	COMBINER_IRQ(11, 2)

-#define EXYNOS4_MAX_COMBINER_NR		16
+#define EXYNOS4210_MAX_COMBINER_NR	16
+#define EXYNOS4212_MAX_COMBINER_NR	18
+#define EXYNOS4412_MAX_COMBINER_NR	20
+#define EXYNOS4_MAX_COMBINER_NR		EXYNOS4412_MAX_COMBINER_NR

 #define EXYNOS4_IRQ_GPIO1_NR_GROUPS	16
 #define EXYNOS4_IRQ_GPIO2_NR_GROUPS	9
@@ -233,7 +239,6 @@
 #define IRQ_TC				EXYNOS4_IRQ_PEN0

 #define IRQ_KEYPAD			EXYNOS4_IRQ_KEYPAD
-#define IRQ_PMU				EXYNOS4_IRQ_PMU

 #define IRQ_FIMD0_FIFO			EXYNOS4_IRQ_FIMD0_FIFO
 #define IRQ_FIMD0_VSYNC			EXYNOS4_IRQ_FIMD0_VSYNC
@@ -323,8 +328,6 @@
 #define EXYNOS5_IRQ_CEC			IRQ_SPI(114)
 #define EXYNOS5_IRQ_SATA		IRQ_SPI(115)

-#define EXYNOS5_IRQ_MCT_L0		IRQ_SPI(120)
-#define EXYNOS5_IRQ_MCT_L1		IRQ_SPI(121)
 #define EXYNOS5_IRQ_MMC44		IRQ_SPI(123)
 #define EXYNOS5_IRQ_MDMA1		IRQ_SPI(124)
 #define EXYNOS5_IRQ_FIMC_LITE0		IRQ_SPI(125)
@@ -419,8 +422,6 @@
 #define EXYNOS5_IRQ_PMU_CPU1		COMBINER_IRQ(22, 4)

 #define EXYNOS5_IRQ_EINT0		COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_G0		COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1		COMBINER_IRQ(23, 4)

 #define EXYNOS5_IRQ_EINT1		COMBINER_IRQ(24, 0)
 #define EXYNOS5_IRQ_SYSMMU_LITE1_0	COMBINER_IRQ(24, 1)

--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -65,7 +65,6 @@
 #define EXYNOS5_PA_CMU			0x10010000

 #define EXYNOS4_PA_SYSTIMER		0x10050000
-#define EXYNOS5_PA_SYSTIMER		0x101C0000

 #define EXYNOS4_PA_WATCHDOG		0x10060000
 #define EXYNOS5_PA_WATCHDOG		0x101D0000

--- a/arch/arm/mach-exynos/include/mach/regs-mct.h
+++ b/arch/arm/mach-exynos/include/mach/regs-mct.h
-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x)		(S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L		EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U		EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT		EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L		EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U		EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR	EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON		EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT		EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK		(0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET		(0x00)
-#define MCT_L_ICNTB_OFFSET		(0x08)
-#define MCT_L_TCON_OFFSET		(0x20)
-#define MCT_L_INT_CSTAT_OFFSET		(0x30)
-#define MCT_L_INT_ENB_OFFSET		(0x34)
-#define MCT_L_WSTAT_OFFSET		(0x40)
-
-#define MCT_G_TCON_START		(1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC	(1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE		(1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE	(1 << 2)
-#define MCT_L_TCON_INT_START		(1 << 1)
-#define MCT_L_TCON_TIMER_START		(1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -178,7 +178,6 @@ static void __init armlex4210_smsc911x_init(void)
 static void __init armlex4210_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(armlex4210_uartcfgs,
 			   ARRAY_SIZE(armlex4210_uartcfgs));
 }
@@ -203,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.map_io		= armlex4210_map_io,
 	.init_machine	= armlex4210_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.restart	= exynos4_restart,
 MACHINE_END
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -11,121 +11,26 @@
 * published by the Free Software Foundation.
 */

+#include <linux/kernel.h>
 #include <linux/of_platform.h>
+#include <linux/of_fdt.h>
 #include <linux/serial_core.h>
+#include <linux/memblock.h>
+#include <linux/clocksource.h>

 #include <asm/mach/arch.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
+#include <plat/mfc.h>

 #include "common.h"

-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the Exynos4 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
-				"exynos4210-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2,
-				"exynos4210-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3,
-				"exynos4210-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
-				"exynos4-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
-				"exynos4-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
-				"exynos4-sdhci.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
-				"exynos4-sdhci.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
-				"s3c2440-i2c.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
-				"s3c2440-i2c.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
-				"s3c2440-i2c.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
-				"s3c2440-i2c.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
-				"s3c2440-i2c.4", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
-				"s3c2440-i2c.5", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
-				"s3c2440-i2c.6", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
-				"s3c2440-i2c.7", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
-				"exynos4210-spi.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
-				"exynos4210-spi.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
-				"exynos4210-spi.2", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
-				"exynos-tmu", NULL),
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000,
-			"exynos-sysmmu.0", NULL), /* MFC_L */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000,
-			"exynos-sysmmu.1", NULL), /* MFC_R */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000,
-			"exynos-sysmmu.2", NULL), /* TV */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000,
-			"exynos-sysmmu.3", NULL), /* JPEG */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000,
-			"exynos-sysmmu.4", NULL), /* ROTATOR */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000,
-			"exynos-sysmmu.5", NULL), /* FIMC0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000,
-			"exynos-sysmmu.6", NULL), /* FIMC1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000,
-			"exynos-sysmmu.7", NULL), /* FIMC2 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000,
-			"exynos-sysmmu.8", NULL), /* FIMC3 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000,
-			"exynos-sysmmu.9", NULL), /* G2D(4210) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000,
-			"exynos-sysmmu.9", NULL), /* G2D(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000,
-			"exynos-sysmmu.10", NULL), /* FIMD0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000,
-			"exynos-sysmmu.11", NULL), /* FIMD1(4210) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000,
-			"exynos-sysmmu.12", NULL), /* IS0(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000,
-			"exynos-sysmmu.13", NULL), /* IS1(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000,
-			"exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000,
-			"exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */
-	{},
-};
-
 static void __init exynos4_dt_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
 }

 static void __init exynos4_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-				exynos4_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }

 static char const *exynos4_dt_compat[] __initdata = {
@@ -135,6 +40,18 @@ static char const *exynos4_dt_compat[] __initdata = {
 	NULL
 };

+static void __init exynos4_reserve(void)
+{
+#ifdef CONFIG_S5P_DEV_MFC
+	struct s5p_mfc_dt_meminfo mfc_mem;
+
+	/* Reserve memory for MFC only if it's available */
+	mfc_mem.compatible = "samsung,mfc-v5";
+	if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+		s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+				mfc_mem.lsize);
+#endif
+}
 DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	.smp		= smp_ops(exynos_smp_ops),
@@ -142,7 +59,8 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	.map_io		= exynos4_dt_map_io,
 	.init_machine	= exynos4_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.dt_compat	= exynos4_dt_compat,
 	.restart        = exynos4_restart,
+	.reserve	= exynos4_reserve,
 MACHINE_END
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -11,151 +11,21 @@

 #include <linux/of_platform.h>
 #include <linux/of_fdt.h>
-#include <linux/serial_core.h>
 #include <linux/memblock.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>

 #include <asm/mach/arch.h>
-#include <mach/map.h>
 #include <mach/regs-pmu.h>

 #include <plat/cpu.h>
-#include <plat/regs-serial.h>
 #include <plat/mfc.h>

 #include "common.h"

-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the EXYNOS5 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
-				"exynos4210-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
-				"exynos4210-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
-				"exynos4210-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
-				"s3c2440-i2c.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
-				"s3c2440-i2c.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
-				"s3c2440-i2c.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
-				"s3c2440-i2c.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
-				"s3c2440-i2c.4", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
-				"s3c2440-i2c.5", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
-				"s3c2440-i2c.6", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
-				"s3c2440-i2c.7", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
-				"s3c2440-hdmiphy-i2c", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
-				"dw_mmc.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
-				"dw_mmc.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
-				"dw_mmc.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
-				"dw_mmc.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
-				"exynos4210-spi.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
-				"exynos4210-spi.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
-				"exynos4210-spi.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
-				"exynos5-sata", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
-				"exynos5-sata-phy", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
-				"exynos5-sata-phy-i2c", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
-	OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
-				"exynos-gsc.0", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
-				"exynos-gsc.1", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
-				"exynos-gsc.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
-				"exynos-gsc.3", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
-				"exynos5-hdmi", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
-				"exynos5-mixer", NULL),
-	OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
-	OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
-				"exynos-tmu", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000,
-				"samsung-i2s.0", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000,
-				"samsung-i2s.1", NULL),
-	OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000,
-				"samsung-i2s.2", NULL),
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000,
-			"exynos-sysmmu.0", "mfc"), /* MFC_L */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000,
-			"exynos-sysmmu.1", "mfc"), /* MFC_R */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000,
-			"exynos-sysmmu.2", NULL), /* TV */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000,
-			"exynos-sysmmu.3", "jpeg"), /* JPEG */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000,
-			"exynos-sysmmu.4", NULL), /* ROTATOR */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000,
-			"exynos-sysmmu.5", "gscl"), /* GSCL0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000,
-			"exynos-sysmmu.6", "gscl"), /* GSCL1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000,
-			"exynos-sysmmu.7", "gscl"), /* GSCL2 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000,
-			"exynos-sysmmu.8", "gscl"), /* GSCL3 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000,
-			"exynos-sysmmu.9", NULL), /* FIMC-IS0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000,
-			"exynos-sysmmu.10", NULL), /* FIMC-IS1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000,
-			"exynos-sysmmu.11", NULL), /* FIMD1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000,
-			"exynos-sysmmu.12", NULL), /* FIMC-LITE0 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000,
-			"exynos-sysmmu.13", NULL), /* FIMC-LITE1 */
-	OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000,
-			"exynos-sysmmu.14", NULL), /* G2D */
-	{},
-};
-
-static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
-				"exynos4210-uart.0", NULL),
-	{},
-};
-
 static void __init exynos5_dt_map_io(void)
 {
-	unsigned long root = of_get_flat_dt_root();
-
 	exynos_init_io(NULL, 0);
-
-	if (of_flat_dt_is_compatible(root, "samsung,exynos5250"))
-		s3c24xx_init_clocks(24000000);
 }

 static void __init exynos5_dt_machine_init(void)
@@ -182,12 +52,7 @@ static void __init exynos5_dt_machine_init(void)
 		}
 	}

-	if (of_machine_is_compatible("samsung,exynos5250"))
-		of_platform_populate(NULL, of_default_bus_match_table,
-				     exynos5250_auxdata_lookup, NULL);
-	else if (of_machine_is_compatible("samsung,exynos5440"))
-		of_platform_populate(NULL, of_default_bus_match_table,
-				     exynos5440_auxdata_lookup, NULL);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }

 static char const *exynos5_dt_compat[] __initdata = {
@@ -216,7 +81,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
 	.map_io		= exynos5_dt_map_io,
 	.init_machine	= exynos5_dt_machine_init,
 	.init_late	= exynos_init_late,
-	.init_time	= exynos4_timer_init,
+	.init_time	= exynos_init_time,
 	.dt_compat	= exynos5_dt_compat,
 	.restart        = exynos5_restart,
 	.reserve	= exynos5_reserve,

--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
--- a/arch/arm/mach-omap2/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
--- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c
--- a/arch/arm/mach-s3c24xx/irq-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2440.c
--- a/arch/arm/mach-s3c24xx/irq-s3c244x.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c244x.c
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
--- a/arch/arm/mach-zynq/Makefile
+++ b/arch/arm/mach-zynq/Makefile
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
--- a/arch/arm/plat-samsung/include/plat/s5p-time.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-time.h
--- a/arch/arm/plat-samsung/s5p-time.c
+++ b/arch/arm/plat-samsung/s5p-time.c
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
--- a/drivers/Makefile
+++ b/drivers/Makefile
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
--- a/drivers/clk/samsung/clk-exynos4.c
+++ b/drivers/clk/samsung/clk-exynos4.c
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
--- a/drivers/clk/samsung/clk-exynos5440.c
+++ b/drivers/clk/samsung/clk-exynos5440.c
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
--- a/drivers/clk/samsung/clk.c
+++ b/drivers/clk/samsung/clk.c
--- a/drivers/clk/samsung/clk.h
+++ b/drivers/clk/samsung/clk.h
--- a/drivers/clk/tegra/Makefile
+++ b/drivers/clk/tegra/Makefile
--- a/drivers/clk/tegra/clk-periph-gate.c
+++ b/drivers/clk/tegra/clk-periph-gate.c
--- a/drivers/clk/tegra/clk-periph.c
+++ b/drivers/clk/tegra/clk-periph.c
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
--- a/drivers/clk/tegra/clk-tegra114.c
+++ b/drivers/clk/tegra/clk-tegra114.c
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
--- a/drivers/clk/tegra/clk.c
+++ b/drivers/clk/tegra/clk.c
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
--- a/drivers/clocksource/cadence_ttc_timer.c
+++ b/drivers/clocksource/cadence_ttc_timer.c
--- a/drivers/clocksource/em_sti.c
+++ b/drivers/clocksource/em_sti.c
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
--- a/drivers/clocksource/sh_cmt.c
+++ b/drivers/clocksource/sh_cmt.c
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
--- a/drivers/gpio/gpio-vt8500.c
+++ b/drivers/gpio/gpio-vt8500.c
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
--- a/drivers/irqchip/exynos-combiner.c
+++ b/drivers/irqchip/exynos-combiner.c
--- a/drivers/irqchip/irq-renesas-intc-irqpin.c
+++ b/drivers/irqchip/irq-renesas-intc-irqpin.c
--- a/drivers/irqchip/irq-renesas-irqc.c
+++ b/drivers/irqchip/irq-renesas-irqc.c
--- a/arch/arm/mach-s3c24xx/irq.c
+++ b/arch/arm/mach-s3c24xx/irq.c
--- a/arch/arm/mach-vt8500/irq.c
+++ b/arch/arm/mach-vt8500/irq.c
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
--- a/drivers/pinctrl/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/pinctrl-bcm2835.c
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
--- a/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh73a0.c
--- a/drivers/pinctrl/vt8500/Kconfig
+++ b/drivers/pinctrl/vt8500/Kconfig
--- a/drivers/pinctrl/vt8500/Makefile
+++ b/drivers/pinctrl/vt8500/Makefile
--- a/drivers/pinctrl/vt8500/pinctrl-vt8500.c
+++ b/drivers/pinctrl/vt8500/pinctrl-vt8500.c
--- a/drivers/pinctrl/vt8500/pinctrl-wm8505.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8505.c
--- a/drivers/pinctrl/vt8500/pinctrl-wm8650.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8650.c
--- a/drivers/pinctrl/vt8500/pinctrl-wm8750.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8750.c
--- a/drivers/pinctrl/vt8500/pinctrl-wm8850.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wm8850.c
--- a/drivers/pinctrl/vt8500/pinctrl-wmt.c
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.c
--- a/drivers/pinctrl/vt8500/pinctrl-wmt.h
+++ b/drivers/pinctrl/vt8500/pinctrl-wmt.h
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
--- a/include/linux/clk/tegra.h
+++ b/include/linux/clk/tegra.h
--- a/include/linux/of.h
+++ b/include/linux/of.h
--- a/include/linux/platform_data/irq-renesas-intc-irqpin.h
+++ b/include/linux/platform_data/irq-renesas-intc-irqpin.h
--- a/include/linux/platform_data/irq-renesas-irqc.h
+++ b/include/linux/platform_data/irq-renesas-irqc.h
--- a/include/linux/reset-controller.h
+++ b/include/linux/reset-controller.h
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h