Merge tag 'samsung-cpuidle' of...

Merge tag 'samsung-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers

Merge "Samsung CPUIdle updates for v3.20" from Kukjin Kim:

- adds coupled cpuidle support for exynos4210
  : fix for Exynos platform PM code preparing it for the coupled
  cpuidle support and adds coupled cpuidle AFTR mode on exynos4210

Note this is mostrly based on earlier cpuidle-exynos4210 driver
from Daniel Lezcano and Bart updated.

* tag 'samsung-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  cpuidle: exynos: add coupled cpuidle support for exynos4210
  ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/mach-exynos/common.h

@@ -13,6 +13,7 @@
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
 #include <linux/of.h>
+#include <linux/platform_data/cpuidle-exynos.h>
 
 #define EXYNOS3250_SOC_ID	0xE3472000
 #define EXYNOS3_SOC_MASK	0xFFFFF000
@@ -150,8 +151,11 @@ extern void exynos_pm_central_suspend(void);
 extern int exynos_pm_central_resume(void);
 extern void exynos_enter_aftr(void);
 
+extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
+
 extern void s5p_init_cpu(void __iomem *cpuid_addr);
 extern unsigned int samsung_rev(void);
+extern void __iomem *cpu_boot_reg_base(void);
 
 static inline void pmu_raw_writel(u32 val, u32 offset)
 {

arch/arm/mach-exynos/exynos.c

@@ -246,6 +246,10 @@ static void __init exynos_dt_machine_init(void)
 	if (!IS_ENABLED(CONFIG_SMP))
 		exynos_sysram_init();
 
+#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
+	if (of_machine_is_compatible("samsung,exynos4210"))
+		exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data;
+#endif
 	if (of_machine_is_compatible("samsung,exynos4210") ||
 	    of_machine_is_compatible("samsung,exynos4212") ||
 	    (of_machine_is_compatible("samsung,exynos4412") &&

arch/arm/mach-exynos/platsmp.c

@@ -194,7 +194,7 @@ int exynos_cluster_power_state(int cluster)
 		S5P_CORE_LOCAL_PWR_EN);
 }
 
-static inline void __iomem *cpu_boot_reg_base(void)
+void __iomem *cpu_boot_reg_base(void)
 {
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
 		return pmu_base_addr + S5P_INFORM5;

arch/arm/mach-exynos/pm.c

@@ -97,10 +97,6 @@ void exynos_pm_central_suspend(void)
 	tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
 	tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
 	pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
-
-	/* Setting SEQ_OPTION register */
-	pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
-		       S5P_CENTRAL_SEQ_OPTION);
 }
 
 int exynos_pm_central_resume(void)
@@ -164,6 +160,13 @@ void exynos_enter_aftr(void)
 
 	exynos_pm_central_suspend();
 
+	if (of_machine_is_compatible("samsung,exynos4212") ||
+	    of_machine_is_compatible("samsung,exynos4412")) {
+		/* Setting SEQ_OPTION register */
+		pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+			       S5P_CENTRAL_SEQ_OPTION);
+	}
+
 	cpu_suspend(0, exynos_aftr_finisher);
 
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
@@ -176,3 +179,125 @@ void exynos_enter_aftr(void)
 
 	cpu_pm_exit();
 }
+
+static atomic_t cpu1_wakeup = ATOMIC_INIT(0);
+
+static int exynos_cpu0_enter_aftr(void)
+{
+	int ret = -1;
+
+	/*
+	 * If the other cpu is powered on, we have to power it off, because
+	 * the AFTR state won't work otherwise
+	 */
+	if (cpu_online(1)) {
+		/*
+		 * We reach a sync point with the coupled idle state, we know
+		 * the other cpu will power down itself or will abort the
+		 * sequence, let's wait for one of these to happen
+		 */
+		while (exynos_cpu_power_state(1)) {
+			/*
+			 * The other cpu may skip idle and boot back
+			 * up again
+			 */
+			if (atomic_read(&cpu1_wakeup))
+				goto abort;
+
+			/*
+			 * The other cpu may bounce through idle and
+			 * boot back up again, getting stuck in the
+			 * boot rom code
+			 */
+			if (__raw_readl(cpu_boot_reg_base()) == 0)
+				goto abort;
+
+			cpu_relax();
+		}
+	}
+
+	exynos_enter_aftr();
+	ret = 0;
+
+abort:
+	if (cpu_online(1)) {
+		/*
+		 * Set the boot vector to something non-zero
+		 */
+		__raw_writel(virt_to_phys(exynos_cpu_resume),
+			     cpu_boot_reg_base());
+		dsb();
+
+		/*
+		 * Turn on cpu1 and wait for it to be on
+		 */
+		exynos_cpu_power_up(1);
+		while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN)
+			cpu_relax();
+
+		while (!atomic_read(&cpu1_wakeup)) {
+			/*
+			 * Poke cpu1 out of the boot rom
+			 */
+			__raw_writel(virt_to_phys(exynos_cpu_resume),
+				     cpu_boot_reg_base());
+
+			arch_send_wakeup_ipi_mask(cpumask_of(1));
+		}
+	}
+
+	return ret;
+}
+
+static int exynos_wfi_finisher(unsigned long flags)
+{
+	cpu_do_idle();
+
+	return -1;
+}
+
+static int exynos_cpu1_powerdown(void)
+{
+	int ret = -1;
+
+	/*
+	 * Idle sequence for cpu1
+	 */
+	if (cpu_pm_enter())
+		goto cpu1_aborted;
+
+	/*
+	 * Turn off cpu 1
+	 */
+	exynos_cpu_power_down(1);
+
+	ret = cpu_suspend(0, exynos_wfi_finisher);
+
+	cpu_pm_exit();
+
+cpu1_aborted:
+	dsb();
+	/*
+	 * Notify cpu 0 that cpu 1 is awake
+	 */
+	atomic_set(&cpu1_wakeup, 1);
+
+	return ret;
+}
+
+static void exynos_pre_enter_aftr(void)
+{
+	__raw_writel(virt_to_phys(exynos_cpu_resume), cpu_boot_reg_base());
+}
+
+static void exynos_post_enter_aftr(void)
+{
+	atomic_set(&cpu1_wakeup, 0);
+}
+
+struct cpuidle_exynos_data cpuidle_coupled_exynos_data = {
+	.cpu0_enter_aftr		= exynos_cpu0_enter_aftr,
+	.cpu1_powerdown		= exynos_cpu1_powerdown,
+	.pre_enter_aftr		= exynos_pre_enter_aftr,
+	.post_enter_aftr		= exynos_post_enter_aftr,
+};

arch/arm/mach-exynos/suspend.c

@@ -282,6 +282,10 @@ static int exynos_pm_suspend(void)
 {
 	exynos_pm_central_suspend();
 
+	/* Setting SEQ_OPTION register */
+	pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+		       S5P_CENTRAL_SEQ_OPTION);
+
 	if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
 		exynos_cpu_save_register();
 

drivers/cpuidle/Kconfig.arm

@@ -55,6 +55,7 @@ config ARM_AT91_CPUIDLE
 config ARM_EXYNOS_CPUIDLE
 	bool "Cpu Idle Driver for the Exynos processors"
 	depends on ARCH_EXYNOS
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	help
 	  Select this to enable cpuidle for Exynos processors
 

drivers/cpuidle/cpuidle-exynos.c

-/* linux/arch/arm/mach-exynos/cpuidle.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
+ * Coupled cpuidle support based on the work of:
+ *	Colin Cross <ccross@android.com>
+ *	Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
@@ -13,13 +16,49 @@
 #include <linux/export.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/platform_data/cpuidle-exynos.h>
 
 #include <asm/proc-fns.h>
 #include <asm/suspend.h>
 #include <asm/cpuidle.h>
 
+static atomic_t exynos_idle_barrier;
+
+static struct cpuidle_exynos_data *exynos_cpuidle_pdata;
 static void (*exynos_enter_aftr)(void);
 
+static int exynos_enter_coupled_lowpower(struct cpuidle_device *dev,
+					 struct cpuidle_driver *drv,
+					 int index)
+{
+	int ret;
+
+	exynos_cpuidle_pdata->pre_enter_aftr();
+
+	/*
+	 * Waiting all cpus to reach this point at the same moment
+	 */
+	cpuidle_coupled_parallel_barrier(dev, &exynos_idle_barrier);
+
+	/*
+	 * Both cpus will reach this point at the same time
+	 */
+	ret = dev->cpu ? exynos_cpuidle_pdata->cpu1_powerdown()
+		       : exynos_cpuidle_pdata->cpu0_enter_aftr();
+	if (ret)
+		index = ret;
+
+	/*
+	 * Waiting all cpus to finish the power sequence before going further
+	 */
+	cpuidle_coupled_parallel_barrier(dev, &exynos_idle_barrier);
+
+	exynos_cpuidle_pdata->post_enter_aftr();
+
+	return index;
+}
+
 static int exynos_enter_lowpower(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
@@ -55,13 +94,40 @@ static struct cpuidle_driver exynos_idle_driver = {
 	.safe_state_index = 0,
 };
 
+static struct cpuidle_driver exynos_coupled_idle_driver = {
+	.name			= "exynos_coupled_idle",
+	.owner			= THIS_MODULE,
+	.states = {
+		[0] = ARM_CPUIDLE_WFI_STATE,
+		[1] = {
+			.enter			= exynos_enter_coupled_lowpower,
+			.exit_latency		= 5000,
+			.target_residency	= 10000,
+			.flags			= CPUIDLE_FLAG_COUPLED |
+						  CPUIDLE_FLAG_TIMER_STOP,
+			.name			= "C1",
+			.desc			= "ARM power down",
+		},
+	},
+	.state_count = 2,
+	.safe_state_index = 0,
+};
+
 static int exynos_cpuidle_probe(struct platform_device *pdev)
 {
 	int ret;
 
-	exynos_enter_aftr = (void *)(pdev->dev.platform_data);
+	if (of_machine_is_compatible("samsung,exynos4210")) {
+		exynos_cpuidle_pdata = pdev->dev.platform_data;
+
+		ret = cpuidle_register(&exynos_coupled_idle_driver,
+				       cpu_possible_mask);
+	} else {
+		exynos_enter_aftr = (void *)(pdev->dev.platform_data);
+
+		ret = cpuidle_register(&exynos_idle_driver, NULL);
+	}
 
-	ret = cpuidle_register(&exynos_idle_driver, NULL);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register cpuidle driver\n");
 		return ret;

include/linux/platform_data/cpuidle-exynos.h

+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __CPUIDLE_EXYNOS_H
+#define __CPUIDLE_EXYNOS_H
+
+struct cpuidle_exynos_data {
+	int (*cpu0_enter_aftr)(void);
+	int (*cpu1_powerdown)(void);
+	void (*pre_enter_aftr)(void);
+	void (*post_enter_aftr)(void);
+};
+
+#endif