提交 6f3df63f 编写于 作者: A Alexandre Courbot 提交者: Stephen Warren

ARM: tegra: add Tegra Note 7 device tree

Tegra Note 7 is a consumer tablet embedding a Tegra 4 SoC with 1GB RAM
and a 720p panel.

The following hardware is enabled by this device tree: UART, eMMC, USB
(needs external power), PMIC, backlight, DSI panel, keys.

SD card, HDMI, charger, self-powered USB, audio, wifi, bluetooth are not
yet supported but might be by future patches (likely in that order).

Touch panel, sensors & cameras will probably never be supported.

Pinctrl is not set yet, as the bootloader-provided values allow us to
use the currently supported hardware.

Initrd addresses are hardcoded to match the static values used by the
bootloader, since it won't add them for us. All the same, a kernel
command-line is provided to replace the one passed by the bootloader
which is filled with garbage.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
[treding@nvidia.com: DT fixes, DSI panel support]
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
上级 cffb57e6
......@@ -368,6 +368,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
tegra114-tn7.dtb \
tegra124-jetson-tk1.dtb \
tegra124-venice2.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
......
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "tegra114.dtsi"
/ {
model = "Tegra Note 7";
compatible = "nvidia,tn7", "nvidia,tegra114";
chosen {
/* TN7's bootloader's arguments need to be overridden */
bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
/* TN7's bootloader will place initrd at this address */
linux,initrd-start = <0x82000000>;
linux,initrd-end = <0x82800000>;
};
firmware {
trusted-foundations {
compatible = "tlm,trusted-foundations";
tlm,version-major = <2>;
tlm,version-minor = <8>;
};
};
memory {
/* memory >= 0x37e00000 is reserved for firmware usage */
reg = <0x80000000 0x37e00000>;
};
host1x@50000000 {
dsi@54300000 {
status = "okay";
vdd-supply = <&vdd_1v2_ap>;
panel@0 {
compatible = "lg,ld070wx3-sl01";
reg = <0>;
power-supply = <&vdd_lcd>;
backlight = <&backlight>;
};
};
};
serial@70006300 {
status = "okay";
};
pwm@7000a000 {
status = "okay";
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
palmas: pmic@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
palmas_gpio: gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
pmic {
compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
ldoln-in-supply = <&vdd_smps10_out2>;
regulators {
smps123 {
regulator-name = "vd-cpu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
smps45 {
regulator-name = "vd-soc";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
smps6 {
regulator-name = "va-lcd-hv";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
};
smps7 {
regulator-name = "vd-ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8: smps8 {
regulator-name = "vs-pmu-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_2v9_sys: smps9 {
regulator-name = "vs-sys-2v9";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-always-on;
regulator-boot-on;
};
vdd_smps10_out1: smps10_out1 {
regulator-name = "vd-smps10-out1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vdd_smps10_out2: smps10_out2 {
regulator-name = "vd-smps10-out2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
ldo1 {
regulator-name = "va-pllx";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v2_ap: ldo2 {
regulator-name = "va-ap-1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
ldo3 {
regulator-name = "vd-fuse";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4 {
regulator-name = "vd-ts-hv";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
regulator-boot-on;
};
ldo5 {
regulator-name = "va-cam2-hv";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
ldo6 {
regulator-name = "va-sns-hv";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
ldo7 {
regulator-name = "va-cam1-hv";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
ldo8 {
regulator-name = "va-ap-rtc";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
ti,enable-ldo8-tracking;
regulator-always-on;
regulator-boot-on;
};
ldo9 {
regulator-name = "vi-sdcard";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
};
ldousb {
regulator-name = "avdd-usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldoln {
regulator-name = "va-hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
};
rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&palmas>;
interrupts = <8 0>;
};
};
};
pmc@7000e400 {
nvidia,invert-interrupt;
};
/* eMMC */
sdhci@78000600 {
status = "okay";
bus-width = <8>;
vmmc-supply = <&vdd_1v8>;
non-removable;
};
usb@7d000000 {
status = "okay";
};
usb-phy@7d000000 {
status = "okay";
nvidia,xcvr-setup = <7>;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
/* Should be changed to "otg" once we have vbus_supply */
/* As of now, USB devices need to be powered externally */
dr_mode = "host";
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 1 40000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&lcd_bl_en>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
volume_down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
volume_up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
/* FIXME: output of BQ24192 */
vs_sys: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "VS_SYS";
regulator-min-microvolt = <4200000>;
regulator-max-microvolt = <4200000>;
regulator-always-on;
regulator-boot-on;
};
lcd_bl_en: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "VDD_LCD_BL";
regulator-min-microvolt = <16500000>;
regulator-max-microvolt = <16500000>;
gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vs_sys>;
regulator-boot-on;
};
vdd_lcd: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "VD_LCD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_1v8>;
regulator-boot-on;
};
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册