提交 6f13fd57 编写于 作者: A Andrew Vasquez 提交者: James Bottomley

[SCSI] qla2xxx: Wait for FLASH write-protection to complete after a write.

Some flash parts have a slow enable write-protection (WP)
operation whereby subsequent FLASH accesses would fail if the WP
operation had not completed.  Software now polls the SPI's
status-register for WP completion.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
上级 3776541d
......@@ -550,7 +550,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
int ret;
uint32_t liter, miter;
uint32_t sec_mask, rest_addr, conf_addr;
uint32_t fdata, findex ;
uint32_t fdata, findex, cnt;
uint8_t man_id, flash_id;
struct device_reg_24xx __iomem *reg = &ha->iobase->isp24;
dma_addr_t optrom_dma;
......@@ -690,8 +690,14 @@ qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
0xff0000) | ((fdata >> 16) & 0xff));
}
/* Enable flash write-protection. */
/* Enable flash write-protection and wait for completion. */
qla24xx_write_flash_dword(ha, flash_conf_to_access_addr(0x101), 0x9c);
for (cnt = 300; cnt &&
qla24xx_read_flash_dword(ha,
flash_conf_to_access_addr(0x005)) & BIT_0;
cnt--) {
udelay(10);
}
/* Disable flash write. */
WRT_REG_DWORD(&reg->ctrl_status,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册