提交 6f0f6d87 编写于 作者: J Jeff Garzik

[PATCH] WAN/pc300: handle, propagate minor errors

- move definition of 'tmc' and 'br' locals closer to usage

- handle clock_rate_calc() error

- propagate errors back to upper level open routine
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
上级 718ecac2
......@@ -2867,7 +2867,6 @@ static int ch_config(pc300dev_t * d)
uclong clktype = chan->conf.phys_settings.clock_type;
ucshort encoding = chan->conf.proto_settings.encoding;
ucshort parity = chan->conf.proto_settings.parity;
int tmc, br;
ucchar md0, md2;
/* Reset the channel */
......@@ -2940,8 +2939,12 @@ static int ch_config(pc300dev_t * d)
case PC300_RSV:
case PC300_X21:
if (clktype == CLOCK_INT || clktype == CLOCK_TXINT) {
int tmc, br;
/* Calculate the clkrate parameters */
tmc = clock_rate_calc(clkrate, card->hw.clock, &br);
if (tmc < 0)
return -EIO;
cpc_writeb(scabase + M_REG(TMCT, ch), tmc);
cpc_writeb(scabase + M_REG(TXS, ch),
(TXS_DTRXC | TXS_IBRG | br));
......@@ -3097,14 +3100,16 @@ static int cpc_attach(struct net_device *dev, unsigned short encoding,
return 0;
}
static void cpc_opench(pc300dev_t * d)
static int cpc_opench(pc300dev_t * d)
{
pc300ch_t *chan = (pc300ch_t *) d->chan;
pc300_t *card = (pc300_t *) chan->card;
int ch = chan->channel;
int ch = chan->channel, rc;
void __iomem *scabase = card->hw.scabase;
ch_config(d);
rc = ch_config(d);
if (rc)
return rc;
rx_config(d);
......@@ -3113,6 +3118,8 @@ static void cpc_opench(pc300dev_t * d)
/* Assert RTS and DTR */
cpc_writeb(scabase + M_REG(CTL, ch),
cpc_readb(scabase + M_REG(CTL, ch)) & ~(CTL_RTS | CTL_DTR));
return 0;
}
static void cpc_closech(pc300dev_t * d)
......@@ -3168,9 +3175,16 @@ int cpc_open(struct net_device *dev)
}
sprintf(ifr.ifr_name, "%s", dev->name);
cpc_opench(d);
result = cpc_opench(d);
if (result)
goto err_out;
netif_start_queue(dev);
return 0;
err_out:
hdlc_close(dev);
return result;
}
static int cpc_close(struct net_device *dev)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册