提交 6eb9c9da 编写于 作者: L Linus Walleij 提交者: David S. Miller

of: mdio: Support fixed links in of_phy_get_and_connect()

By a simple extension of of_phy_get_and_connect() drivers
that have a fixed link on e.g. RGMII can support also
fixed links, so in addition to:

ethernet-port {
	phy-mode = "rgmii";
	phy-handle = <&foo>;
};

This setup with a fixed-link node and no phy-handle will
now also work just fine:

ethernet-port {
	phy-mode = "rgmii";
	fixed-link {
		speed = <1000>;
		full-duplex;
		pause;
	};
};

This is very helpful for connecting random ethernet ports
to e.g. DSA switches that typically reside on fixed links.

The phy-mode is still there as the fixes link in this case
is still an RGMII link.

Tested on the Cortina Gemini driver with the Vitesse DSA
router chip on a fixed 1Gbit link.
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 01683a14
......@@ -367,14 +367,23 @@ struct phy_device *of_phy_get_and_connect(struct net_device *dev,
phy_interface_t iface;
struct device_node *phy_np;
struct phy_device *phy;
int ret;
iface = of_get_phy_mode(np);
if (iface < 0)
return NULL;
phy_np = of_parse_phandle(np, "phy-handle", 0);
if (!phy_np)
return NULL;
if (of_phy_is_fixed_link(np)) {
ret = of_phy_register_fixed_link(np);
if (ret < 0) {
netdev_err(dev, "broken fixed-link specification\n");
return NULL;
}
phy_np = of_node_get(np);
} else {
phy_np = of_parse_phandle(np, "phy-handle", 0);
if (!phy_np)
return NULL;
}
phy = of_phy_connect(dev, phy_np, hndlr, 0, iface);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册