提交 6e941192 编写于 作者: B Boris BREZILLON 提交者: Brian Norris

mtd: nand: return consistent error codes in ecc.correct() implementations

The error code returned by the ecc.correct() are not consistent over the
all implementations.

Document the expected behavior in include/linux/mtd/nand.h and fix
offending implementations.

[Brian: this looks like a bugfix for the ECC reporting in the bf5xx_nand
driver, but we haven't seen any testing results for it]
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: NFranklin S Cooper Jr. <fcooper@ti.com>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
上级 6f357de8
......@@ -1445,7 +1445,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
* We can't correct so many errors */
dev_dbg(host->dev, "atmel_nand : multiple errors detected."
" Unable to correct.\n");
return -EIO;
return -EBADMSG;
}
/* if there's a single bit error : we can correct it */
......
......@@ -252,7 +252,7 @@ static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
*/
if (hweight32(syndrome[0]) == 1) {
dev_err(info->device, "ECC data was incorrect!\n");
return 1;
return -EBADMSG;
}
syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF);
......@@ -285,7 +285,7 @@ static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
data = data ^ (0x1 << failing_bit);
*(dat + failing_byte) = data;
return 0;
return 1;
}
/*
......@@ -298,26 +298,34 @@ static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
dev_err(info->device,
"Please discard data, mark bad block\n");
return 1;
return -EBADMSG;
}
static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
u_char *read_ecc, u_char *calc_ecc)
{
struct nand_chip *chip = mtd_to_nand(mtd);
int ret;
int ret, bitflips = 0;
ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
if (ret < 0)
return ret;
bitflips = ret;
/* If ecc size is 512, correct second 256 bytes */
if (chip->ecc.size == 512) {
dat += 256;
read_ecc += 3;
calc_ecc += 3;
ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
if (ret < 0)
return ret;
bitflips += ret;
}
return ret;
return bitflips;
}
static void bf5xx_nand_enable_hwecc(struct mtd_info *mtd, int mode)
......
......@@ -207,7 +207,7 @@ static int nand_davinci_correct_1bit(struct mtd_info *mtd, u_char *dat,
dat[diff >> (12 + 3)] ^= BIT((diff >> 12) & 7);
return 1;
} else {
return -1;
return -EBADMSG;
}
} else if (!(diff & (diff - 1))) {
/* Single bit ECC error in the ECC itself,
......@@ -215,7 +215,7 @@ static int nand_davinci_correct_1bit(struct mtd_info *mtd, u_char *dat,
return 1;
} else {
/* Uncorrectable error */
return -1;
return -EBADMSG;
}
}
......@@ -391,7 +391,7 @@ static int nand_davinci_correct_4bit(struct mtd_info *mtd,
return 0;
case 1: /* five or more errors detected */
davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
return -EIO;
return -EBADMSG;
case 2: /* error addresses computed */
case 3:
num_errors = 1 + ((fsr >> 16) & 0x03);
......
......@@ -254,7 +254,7 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
} while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
if (timeout == 0)
return -1;
return -ETIMEDOUT;
reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
......@@ -262,7 +262,7 @@ static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
if (status & JZ_NAND_STATUS_ERROR) {
if (status & JZ_NAND_STATUS_UNCOR_ERROR)
return -1;
return -EBADMSG;
error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
......
......@@ -674,7 +674,7 @@ static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
return -1;
return -EBADMSG;
}
return 0;
......@@ -701,7 +701,7 @@ static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
err = ecc_stat & ecc_bit_mask;
if (err > err_limit) {
printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
return -1;
return -EBADMSG;
} else {
ret += err;
}
......
......@@ -98,7 +98,7 @@ int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
}
} else if (count < 0) {
printk(KERN_ERR "ecc unrecoverable error\n");
count = -1;
count = -EBADMSG;
}
return count;
}
......
......@@ -507,7 +507,7 @@ int __nand_correct_data(unsigned char *buf,
return 1; /* error in ECC data; no action needed */
pr_err("%s: uncorrectable ECC error\n", __func__);
return -1;
return -EBADMSG;
}
EXPORT_SYMBOL(__nand_correct_data);
......
......@@ -826,12 +826,12 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
case 1:
/* Uncorrectable error */
pr_debug("ECC UNCORRECTED_ERROR 1\n");
return -1;
return -EBADMSG;
case 11:
/* UN-Correctable error */
pr_debug("ECC UNCORRECTED_ERROR B\n");
return -1;
return -EBADMSG;
case 12:
/* Correctable error */
......@@ -861,7 +861,7 @@ static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
return 0;
}
pr_debug("UNCORRECTED_ERROR default\n");
return -1;
return -EBADMSG;
}
}
......
......@@ -477,7 +477,7 @@ static int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
if (dev->dma_error) {
dev->dma_error = 0;
return -1;
return -EIO;
}
r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
......@@ -491,7 +491,7 @@ static int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
/* ecc uncorrectable error */
if (ecc_status & R852_ECC_FAIL) {
dbg("ecc: unrecoverable error, in half %d", i);
error = -1;
error = -EBADMSG;
goto exit;
}
......
......@@ -456,7 +456,13 @@ struct nand_hw_control {
* @hwctl: function to control hardware ECC generator. Must only
* be provided if an hardware ECC is available
* @calculate: function for ECC calculation or readback from ECC hardware
* @correct: function for ECC correction, matching to ECC generator (sw/hw)
* @correct: function for ECC correction, matching to ECC generator (sw/hw).
* Should return a positive number representing the number of
* corrected bitflips, -EBADMSG if the number of bitflips exceed
* ECC strength, or any other error code if the error is not
* directly related to correction.
* If -EBADMSG is returned the input buffers should be left
* untouched.
* @read_page_raw: function to read a raw page without ECC. This function
* should hide the specific layout used by the ECC
* controller and always return contiguous in-band and
......
......@@ -55,7 +55,7 @@ static inline int
nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
unsigned char *read_ecc, unsigned char *calc_ecc)
{
return -1;
return -ENOTSUPP;
}
static inline struct nand_bch_control *
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册