提交 6e8ab30e 编写于 作者: S Santiago Leon 提交者: David S. Miller

ibmveth: Add scatter-gather support

ibmveth can scatter gather up to 6 segments. If we go over this then
we have no option but to call skb_linearize, like other drivers with
similar limitations do.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NSantiago Leon <santil@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 f89e49e7
...@@ -897,6 +897,7 @@ static const struct ethtool_ops netdev_ethtool_ops = { ...@@ -897,6 +897,7 @@ static const struct ethtool_ops netdev_ethtool_ops = {
.get_strings = ibmveth_get_strings, .get_strings = ibmveth_get_strings,
.get_sset_count = ibmveth_get_sset_count, .get_sset_count = ibmveth_get_sset_count,
.get_ethtool_stats = ibmveth_get_ethtool_stats, .get_ethtool_stats = ibmveth_get_ethtool_stats,
.set_sg = ethtool_op_set_sg,
}; };
static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
...@@ -906,96 +907,158 @@ static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ...@@ -906,96 +907,158 @@ static int ibmveth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
#define page_offset(v) ((unsigned long)(v) & ((1 << 12) - 1)) #define page_offset(v) ((unsigned long)(v) & ((1 << 12) - 1))
static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb, static int ibmveth_send(struct ibmveth_adapter *adapter,
struct net_device *netdev) union ibmveth_buf_desc *descs)
{ {
struct ibmveth_adapter *adapter = netdev_priv(netdev);
union ibmveth_buf_desc desc;
unsigned long lpar_rc;
unsigned long correlator; unsigned long correlator;
unsigned int retry_count; unsigned int retry_count;
unsigned int tx_dropped = 0; unsigned long ret;
unsigned int tx_bytes = 0;
unsigned int tx_packets = 0; /*
unsigned int tx_send_failed = 0; * The retry count sets a maximum for the number of broadcast and
unsigned int tx_map_failed = 0; * multicast destinations within the system.
int used_bounce = 0; */
unsigned long data_dma_addr; retry_count = 1024;
correlator = 0;
do {
ret = h_send_logical_lan(adapter->vdev->unit_address,
descs[0].desc, descs[1].desc,
descs[2].desc, descs[3].desc,
descs[4].desc, descs[5].desc,
correlator, &correlator);
} while ((ret == H_BUSY) && (retry_count--));
if (ret != H_SUCCESS && ret != H_DROPPED) {
ibmveth_error_printk("tx: h_send_logical_lan failed with "
"rc=%ld\n", ret);
return 1;
}
return 0;
}
desc.fields.flags_len = IBMVETH_BUF_VALID | skb->len; static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb,
struct net_device *netdev)
{
struct ibmveth_adapter *adapter = netdev_priv(netdev);
unsigned int desc_flags;
union ibmveth_buf_desc descs[6];
int last, i;
int force_bounce = 0;
/*
* veth handles a maximum of 6 segments including the header, so
* we have to linearize the skb if there are more than this.
*/
if (skb_shinfo(skb)->nr_frags > 5 && __skb_linearize(skb)) {
netdev->stats.tx_dropped++;
goto out;
}
/* veth can't checksum offload UDP */
if (skb->ip_summed == CHECKSUM_PARTIAL && if (skb->ip_summed == CHECKSUM_PARTIAL &&
ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) { ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) {
ibmveth_error_printk("tx: failed to checksum packet\n"); ibmveth_error_printk("tx: failed to checksum packet\n");
tx_dropped++; netdev->stats.tx_dropped++;
goto out; goto out;
} }
desc_flags = IBMVETH_BUF_VALID;
if (skb->ip_summed == CHECKSUM_PARTIAL) { if (skb->ip_summed == CHECKSUM_PARTIAL) {
unsigned char *buf = skb_transport_header(skb) + skb->csum_offset; unsigned char *buf = skb_transport_header(skb) +
skb->csum_offset;
desc.fields.flags_len |= (IBMVETH_BUF_NO_CSUM | IBMVETH_BUF_CSUM_GOOD); desc_flags |= (IBMVETH_BUF_NO_CSUM | IBMVETH_BUF_CSUM_GOOD);
/* Need to zero out the checksum */ /* Need to zero out the checksum */
buf[0] = 0; buf[0] = 0;
buf[1] = 0; buf[1] = 0;
} }
if (skb->len < tx_copybreak) { retry_bounce:
used_bounce = 1; memset(descs, 0, sizeof(descs));
} else {
data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
skb->len, DMA_TO_DEVICE);
if (dma_mapping_error(&adapter->vdev->dev, data_dma_addr)) {
if (!firmware_has_feature(FW_FEATURE_CMO))
ibmveth_error_printk("tx: unable to map "
"xmit buffer\n");
tx_map_failed++;
used_bounce = 1;
}
}
if (used_bounce) { /*
* If a linear packet is below the rx threshold then
* copy it into the static bounce buffer. This avoids the
* cost of a TCE insert and remove.
*/
if (force_bounce || (!skb_is_nonlinear(skb) &&
(skb->len < tx_copybreak))) {
skb_copy_from_linear_data(skb, adapter->bounce_buffer, skb_copy_from_linear_data(skb, adapter->bounce_buffer,
skb->len); skb->len);
desc.fields.address = adapter->bounce_buffer_dma;
} else
desc.fields.address = data_dma_addr;
/* send the frame. Arbitrarily set retrycount to 1024 */ descs[0].fields.flags_len = desc_flags | skb->len;
correlator = 0; descs[0].fields.address = adapter->bounce_buffer_dma;
retry_count = 1024;
do { if (ibmveth_send(adapter, descs)) {
lpar_rc = h_send_logical_lan(adapter->vdev->unit_address, adapter->tx_send_failed++;
desc.desc, 0, 0, 0, 0, 0, netdev->stats.tx_dropped++;
correlator, &correlator); } else {
} while ((lpar_rc == H_BUSY) && (retry_count--)); netdev->stats.tx_packets++;
netdev->stats.tx_bytes += skb->len;
if(lpar_rc != H_SUCCESS && lpar_rc != H_DROPPED) { }
ibmveth_error_printk("tx: h_send_logical_lan failed with rc=%ld\n", lpar_rc);
ibmveth_error_printk("tx: valid=%d, len=%d, address=0x%08x\n", goto out;
(desc.fields.flags_len & IBMVETH_BUF_VALID) ? 1 : 0, }
skb->len, desc.fields.address);
tx_send_failed++; /* Map the header */
tx_dropped++; descs[0].fields.address = dma_map_single(&adapter->vdev->dev, skb->data,
skb_headlen(skb),
DMA_TO_DEVICE);
if (dma_mapping_error(&adapter->vdev->dev, descs[0].fields.address))
goto map_failed;
descs[0].fields.flags_len = desc_flags | skb_headlen(skb);
/* Map the frags */
for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
unsigned long dma_addr;
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
dma_addr = dma_map_page(&adapter->vdev->dev, frag->page,
frag->page_offset, frag->size,
DMA_TO_DEVICE);
if (dma_mapping_error(&adapter->vdev->dev, dma_addr))
goto map_failed_frags;
descs[i+1].fields.flags_len = desc_flags | frag->size;
descs[i+1].fields.address = dma_addr;
}
if (ibmveth_send(adapter, descs)) {
adapter->tx_send_failed++;
netdev->stats.tx_dropped++;
} else { } else {
tx_packets++; netdev->stats.tx_packets++;
tx_bytes += skb->len; netdev->stats.tx_bytes += skb->len;
} }
if (!used_bounce) for (i = 0; i < skb_shinfo(skb)->nr_frags + 1; i++)
dma_unmap_single(&adapter->vdev->dev, data_dma_addr, dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address,
skb->len, DMA_TO_DEVICE); descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK,
DMA_TO_DEVICE);
out: out:
netdev->stats.tx_dropped += tx_dropped;
netdev->stats.tx_bytes += tx_bytes;
netdev->stats.tx_packets += tx_packets;
adapter->tx_send_failed += tx_send_failed;
adapter->tx_map_failed += tx_map_failed;
dev_kfree_skb(skb); dev_kfree_skb(skb);
return NETDEV_TX_OK; return NETDEV_TX_OK;
map_failed_frags:
last = i+1;
for (i = 0; i < last; i++)
dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address,
descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK,
DMA_TO_DEVICE);
map_failed:
if (!firmware_has_feature(FW_FEATURE_CMO))
ibmveth_error_printk("tx: unable to map xmit buffer\n");
adapter->tx_map_failed++;
skb_linearize(skb);
force_bounce = 1;
goto retry_bounce;
} }
static int ibmveth_poll(struct napi_struct *napi, int budget) static int ibmveth_poll(struct napi_struct *napi, int budget)
...@@ -1316,6 +1379,7 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_ ...@@ -1316,6 +1379,7 @@ static int __devinit ibmveth_probe(struct vio_dev *dev, const struct vio_device_
netdev->netdev_ops = &ibmveth_netdev_ops; netdev->netdev_ops = &ibmveth_netdev_ops;
netdev->ethtool_ops = &netdev_ethtool_ops; netdev->ethtool_ops = &netdev_ethtool_ops;
SET_NETDEV_DEV(netdev, &dev->dev); SET_NETDEV_DEV(netdev, &dev->dev);
netdev->features |= NETIF_F_SG;
memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len); memcpy(netdev->dev_addr, &adapter->mac_addr, netdev->addr_len);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册