Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of...

Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Omap device tree fixes for issue discovered during the merge window:

- Fix triggering for GPIO interrupts that's needed for 4430sdp
  Ethernet. Otherwise booting with nfsroot won't work.
- Fix CPU operating point values
- Fix wrong assumption that twl PMIC is always connected to omap3
- Add gpmc for am33xx so beaglebone users can use the bus
- Cosmetic fix for mcspi pin muxing to avoid confusion

* tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: don't assume boards are using twl4030 for omap3
  ARM: dts: Configure and fix the McSPI pins for 4430sdp
  ARM: dts: AM33XX: Add GPMC node
  ARM: dts: OMAP4460: Fix CPU OPP voltages
  ARM: dts: OMAP36xx: Fix CPU OPP voltages
  ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards

arch/arm/boot/dts/am33xx.dtsi

@@ -403,5 +403,17 @@
 			       0x44d80000 0x2000>;	/* M3 DMEM */
 			ti,hwmods = "wkup_m3";
 		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			num-cs = <7>;
+			num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -122,6 +122,7 @@
 
 &usb_otg_hs {
 	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
 	mode = <3>;
 	power = <50>;
 };

arch/arm/boot/dts/omap3-evm.dts

@@ -68,6 +68,7 @@
 
 &usb_otg_hs {
 	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
 	mode = <3>;
 	power = <50>;
 };

arch/arm/boot/dts/omap3-overo.dtsi

@@ -73,6 +73,7 @@
 
 &usb_otg_hs {
 	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
 	mode = <3>;
 	power = <50>;
 };

arch/arm/boot/dts/omap3.dtsi

@@ -519,7 +519,6 @@
 			interrupts = <0 92 0x4>, <0 93 0x4>;
 			interrupt-names = "mc", "dma";
 			ti,hwmods = "usb_otg_hs";
-			usb-phy = <&usb2_phy>;
 			multipoint = <1>;
 			num-eps = <16>;
 			ram-bits = <12>;

arch/arm/boot/dts/omap36xx.dtsi

@@ -20,9 +20,9 @@
 		cpu@0 {
 			operating-points = <
 				/* kHz    uV */
-				300000   975000
-				600000  1075000
-				800000  1200000
+				300000  1012500
+				600000  1200000
+				800000  1325000
 			>;
 			clock-latency = <300000>; /* From legacy driver */
 		};

arch/arm/boot/dts/omap4-sdp.dts

@@ -223,6 +223,15 @@
 		>;
 	};
 
+	mcspi1_pins: pinmux_mcspi1_pins {
+		pinctrl-single,pins = <
+			0xf2 0x100	/*  mcspi1_clk.mcspi1_clk INPUT | MODE0 */
+			0xf4 0x100	/*  mcspi1_somi.mcspi1_somi INPUT | MODE0 */
+			0xf6 0x100	/*  mcspi1_simo.mcspi1_simo INPUT | MODE0 */
+			0xf8 0x100	/*  mcspi1_cs0.mcspi1_cs0 INPUT | MODE0*/
+		>;
+	};
+
 	dss_hdmi_pins: pinmux_dss_hdmi_pins {
 		pinctrl-single,pins = <
 			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
@@ -358,12 +367,15 @@
 };
 
 &mcspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcspi1_pins>;
+
 	eth@0 {
 		compatible = "ks8851";
 		spi-max-frequency = <24000000>;
 		reg = <0>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <2>; /* gpio line 34 */
+		interrupts = <2 8>; /* gpio line 34, low triggered */
 		vdd-supply = <&vdd_eth>;
 	};
 };

arch/arm/boot/dts/omap4-var-som.dts

@@ -68,7 +68,7 @@
 		spi-max-frequency = <24000000>;
 		reg = <0>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <11>; /* gpio line 171 */
+		interrupts = <11 8>; /* gpio line 171, low triggered */
 		vdd-supply = <&vdd_eth>;
 	};
 };

arch/arm/boot/dts/omap4460.dtsi

@@ -15,9 +15,9 @@
 		cpu@0 {
 			operating-points = <
 				/* kHz    uV */
-				350000   975000
-				700000  1075000
-				920000  1200000
+				350000  1025000
+				700000  1200000
+				920000  1313000
 			>;
 			clock-latency = <300000>; /* From legacy driver */
 		};