ARM: OMAP1: Change the comments to C style

Change the comments to C style
Signed-off-by: NDavid Cohen <david.cohen@indt.org.br>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-ams-delta.c

@@ -135,21 +135,21 @@ static void __init ams_delta_init_irq(void)
 }
 
 static struct map_desc ams_delta_io_desc[] __initdata = {
-	// AMS_DELTA_LATCH1
+	/* AMS_DELTA_LATCH1 */
 	{
 		.virtual	= AMS_DELTA_LATCH1_VIRT,
 		.pfn		= __phys_to_pfn(AMS_DELTA_LATCH1_PHYS),
 		.length		= 0x01000000,
 		.type		= MT_DEVICE
 	},
-	// AMS_DELTA_LATCH2
+	/* AMS_DELTA_LATCH2 */
 	{
 		.virtual	= AMS_DELTA_LATCH2_VIRT,
 		.pfn		= __phys_to_pfn(AMS_DELTA_LATCH2_PHYS),
 		.length		= 0x01000000,
 		.type		= MT_DEVICE
 	},
-	// AMS_DELTA_MODEM
+	/* AMS_DELTA_MODEM */
 	{
 		.virtual	= AMS_DELTA_MODEM_VIRT,
 		.pfn		= __phys_to_pfn(AMS_DELTA_MODEM_PHYS),

arch/arm/mach-omap1/board-h2.c

@@ -309,18 +309,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
 	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
 
 	.pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-	//.pcr0 = CLKXP | CLKRP,        /* mcbsp: slave */
+	/*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
 };
 
 static struct omap_alsa_codec_config alsa_config = {
 	.name                   = "H2 TSC2101",
 	.mcbsp_regs_alsa        = &mcbsp_regs,
-	.codec_configure_dev    = NULL, // tsc2101_configure,
-	.codec_set_samplerate   = NULL, // tsc2101_set_samplerate,
-	.codec_clock_setup      = NULL, // tsc2101_clock_setup,
-	.codec_clock_on         = NULL, // tsc2101_clock_on,
-	.codec_clock_off        = NULL, // tsc2101_clock_off,
-	.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+	.codec_configure_dev    = NULL, /* tsc2101_configure, */
+	.codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
+	.codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
+	.codec_clock_on         = NULL, /* tsc2101_clock_on, */
+	.codec_clock_off        = NULL, /* tsc2101_clock_off, */
+	.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
 };
 
 static struct platform_device h2_mcbsp1_device = {
@@ -378,11 +378,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.otg		= 2,
 
 #ifdef	CONFIG_USB_GADGET_OMAP
-	.hmc_mode	= 19,	// 0:host(off) 1:dev|otg 2:disabled
-	// .hmc_mode	= 21,	// 0:host(off) 1:dev(loopback) 2:host(loopback)
+	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
+	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
 #elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
-	.hmc_mode	= 20,	// 1:dev|otg(off) 1:host 2:disabled
+	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
 
 	.pins[1]	= 3,
@@ -443,7 +443,7 @@ static void __init h2_init(void)
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
 
 	/* MMC:  card detect and WP */
-	// omap_cfg_reg(U19_ARMIO1);		/* CD */
+	/* omap_cfg_reg(U19_ARMIO1); */		/* CD */
 	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */
 
 	/* Irda */

arch/arm/mach-omap1/board-h3.c

@@ -388,18 +388,18 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
 	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
 
 	.pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
-	//.pcr0 = CLKXP | CLKRP,        /* mcbsp: slave */
+	/*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
 };
 
 static struct omap_alsa_codec_config alsa_config = {
 	.name                   = "H3 TSC2101",
 	.mcbsp_regs_alsa        = &mcbsp_regs,
-	.codec_configure_dev    = NULL, // tsc2101_configure,
-	.codec_set_samplerate   = NULL, // tsc2101_set_samplerate,
-	.codec_clock_setup      = NULL, // tsc2101_clock_setup,
-	.codec_clock_on         = NULL, // tsc2101_clock_on,
-	.codec_clock_off        = NULL, // tsc2101_clock_off,
-	.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
+	.codec_configure_dev    = NULL, /* tsc2101_configure, */
+	.codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
+	.codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
+	.codec_clock_on         = NULL, /* tsc2101_clock_on, */
+	.codec_clock_off        = NULL, /* tsc2101_clock_off, */
+	.get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
 };
 
 static struct platform_device h3_mcbsp1_device = {

arch/arm/mach-omap1/board-innovator.c

@@ -134,12 +134,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
 static struct omap_alsa_codec_config alsa_config = {
 	.name			= "OMAP Innovator AIC23",
 	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, // aic23_configure,
-	.codec_set_samplerate	= NULL, // aic23_set_samplerate,
-	.codec_clock_setup	= NULL, // aic23_clock_setup,
-	.codec_clock_on		= NULL, // aic23_clock_on,
-	.codec_clock_off	= NULL, // aic23_clock_off,
-	.get_default_samplerate	= NULL, // aic23_get_default_samplerate,
+	.codec_configure_dev	= NULL, /* aic23_configure, */
+	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
+	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
+	.codec_clock_on		= NULL, /* aic23_clock_on, */
+	.codec_clock_off	= NULL, /* aic23_clock_off, */
+	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
 };
 
 static struct platform_device innovator_mcbsp1_device = {
@@ -345,11 +345,11 @@ static struct omap_usb_config h2_usb_config __initdata = {
 	.otg		= 2,
 
 #ifdef	CONFIG_USB_GADGET_OMAP
-	.hmc_mode	= 19,	// 0:host(off) 1:dev|otg 2:disabled
-	// .hmc_mode	= 21,	// 0:host(off) 1:dev(loopback) 2:host(loopback)
+	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
+	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
 #elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
-	.hmc_mode	= 20,	// 1:dev|otg(off) 1:host 2:disabled
+	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
 
 	.pins[1]	= 3,

arch/arm/mach-omap1/board-osk.c

@@ -160,12 +160,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
 static struct omap_alsa_codec_config alsa_config = {
 	.name			= "OSK AIC23",
 	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, // aic23_configure,
-	.codec_set_samplerate	= NULL, // aic23_set_samplerate,
-	.codec_clock_setup	= NULL, // aic23_clock_setup,
-	.codec_clock_on		= NULL, // aic23_clock_on,
-	.codec_clock_off	= NULL, // aic23_clock_off,
-	.get_default_samplerate	= NULL, // aic23_get_default_samplerate,
+	.codec_configure_dev	= NULL, /* aic23_configure, */
+	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
+	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
+	.codec_clock_on		= NULL, /* aic23_clock_on, */
+	.codec_clock_off	= NULL, /* aic23_clock_off, */
+	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
 };
 
 static struct platform_device osk5912_mcbsp1_device = {
@@ -392,7 +392,7 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(W13_1610_CCP_CLKM);
 	omap_cfg_reg(Y12_1610_CCP_CLKP);
 	/* CCP_DATAM CONFLICTS WITH UART1.TX (and serial console) */
-	// omap_cfg_reg(Y14_1610_CCP_DATAM);
+	/* omap_cfg_reg(Y14_1610_CCP_DATAM); */
 	omap_cfg_reg(W14_1610_CCP_DATAP);
 
 	/* CAM_PWDN */
@@ -404,8 +404,8 @@ static void __init osk_mistral_init(void)
 		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
 
 
-	// omap_cfg_reg(P19_1610_GPIO6);	// BUSY
-	omap_cfg_reg(P20_1610_GPIO4);	// PENIRQ
+	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
+	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));

arch/arm/mach-omap1/board-palmtt.c

@@ -144,12 +144,12 @@ static struct omap_mcbsp_reg_cfg mcbsp_regs = {
 static struct omap_alsa_codec_config alsa_config = {
 	.name			= "PalmTT AIC23",
 	.mcbsp_regs_alsa	= &mcbsp_regs,
-	.codec_configure_dev	= NULL, // aic23_configure,
-	.codec_set_samplerate	= NULL, // aic23_set_samplerate,
-	.codec_clock_setup	= NULL, // aic23_clock_setup,
-	.codec_clock_on		= NULL, // aic23_clock_on,
-	.codec_clock_off	= NULL, // aic23_clock_off,
-	.get_default_samplerate	= NULL, // aic23_get_default_samplerate,
+	.codec_configure_dev	= NULL, /* aic23_configure, */
+	.codec_set_samplerate	= NULL, /* aic23_set_samplerate, */
+	.codec_clock_setup	= NULL, /* aic23_clock_setup, */
+	.codec_clock_on		= NULL, /* aic23_clock_on, */
+	.codec_clock_off	= NULL, /* aic23_clock_off, */
+	.get_default_samplerate	= NULL, /* aic23_get_default_samplerate, */
 };
 
 static struct platform_device palmtt_mcbsp1_device = {

arch/arm/mach-omap1/clock.c

-//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text)
 /*
  *  linux/arch/arm/mach-omap1/clock.c
  *
@@ -650,9 +649,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 
 	/* FIXME: This clock seems to be necessary but no-one
 	 * has asked for its activation. */
-	if (clk == &tc2_ck		// FIX: pm.c (SRAM), CCP, Camera
-	    || clk == &ck_dpll1out.clk	// FIX: SoSSI, SSR
-	    || clk == &arm_gpio_ck	// FIX: GPIO code for 1510
+	if (clk == &tc2_ck		/* FIX: pm.c (SRAM), CCP, Camera */
+	    || clk == &ck_dpll1out.clk	/* FIX: SoSSI, SSR */
+	    || clk == &arm_gpio_ck	/* FIX: GPIO code for 1510 */
 		) {
 		printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
 		       clk->name);

arch/arm/mach-omap1/leds-osk.c

@@ -82,7 +82,7 @@ static void mistral_setled(void)
 		red = 1;
 	else if (hw_led_state & IDLE_LED)
 		green = 1;
-	// else both sides are disabled
+	/* else both sides are disabled */
 
 	omap_set_gpio_dataout(GPIO_LED_GREEN, green);
 	omap_set_gpio_dataout(GPIO_LED_RED, red);
@@ -112,7 +112,7 @@ void osk_leds_event(led_event_t evt)
 	case led_stop:
 		led_state &= ~LED_STATE_ENABLED;
 		hw_led_state = 0;
-		// NOTE:  work may still be pending!!
+		/* NOTE:  work may still be pending!! */
 		break;
 
 	case led_claim: