提交 6ded7cd6 编写于 作者: T trem 提交者: David S. Miller

net: phy: smsc: force all capable mode if the phy is started in powerdown mode

A SMSC PHY in power down mode can't be used.
If a SMSC PHY is in this mode in the config_init
stage, the mode "all capable" is set. So the PHY
could then be used.
Signed-off-by: NPhilippe Reynes <tremyfr@yahoo.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 4bd9b0ff
......@@ -43,7 +43,31 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
static int smsc_phy_config_init(struct phy_device *phydev)
{
int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
if (rc < 0)
return rc;
/* If the SMSC PHY is in power down mode, then set it
* in all capable mode before using it.
*/
if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
int timeout = 50000;
/* set "all capable" mode and reset the phy */
rc |= MII_LAN83C185_MODE_ALL;
phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
phy_write(phydev, MII_BMCR, BMCR_RESET);
/* wait end of reset (max 500 ms) */
do {
udelay(10);
if (timeout-- == 0)
return -1;
rc = phy_read(phydev, MII_BMCR);
} while (rc & BMCR_RESET);
}
rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
if (rc < 0)
return rc;
......
......@@ -4,6 +4,7 @@
#define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */
#define MII_LAN83C185_IM 30 /* Interrupt Mask */
#define MII_LAN83C185_CTRL_STATUS 17 /* Mode/Status Register */
#define MII_LAN83C185_SPECIAL_MODES 18 /* Special Modes Register */
#define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */
#define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */
......@@ -22,4 +23,8 @@
#define MII_LAN83C185_EDPWRDOWN (1 << 13) /* EDPWRDOWN */
#define MII_LAN83C185_ENERGYON (1 << 1) /* ENERGYON */
#define MII_LAN83C185_MODE_MASK 0xE0
#define MII_LAN83C185_MODE_POWERDOWN 0xC0 /* Power Down mode */
#define MII_LAN83C185_MODE_ALL 0xE0 /* All capable mode */
#endif /* __LINUX_SMSCPHY_H__ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册