Merge branch 'omap-for-v3.8/cleanup-headers-usb' into omap-for-v3.8/cleanup-headers

Conflicts:
	arch/arm/mach-omap1/clock.c
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-cm-t35.c
	arch/arm/mach-omap2/board-igep0020.c
	arch/arm/mach-omap2/board-ldp.c
	arch/arm/mach-omap2/board-omap3beagle.c
	arch/arm/mach-omap2/board-omap3logic.c
	arch/arm/mach-omap2/board-omap4panda.c
	arch/arm/mach-omap2/board-overo.c
	arch/arm/mach-omap2/board-rm680.c
	arch/arm/mach-omap2/board-rx51.c
	arch/arm/mach-omap2/twl-common.c
	arch/arm/mach-omap2/usb-host.c
	arch/arm/mach-omap2/usb-musb.c

arch/arm/mach-omap1/clock.c

@@ -22,13 +22,11 @@
 
 #include <asm/mach-types.h>
 
-#include "soc.h"
-#include <plat/usb.h>
-
 #include <mach/hardware.h>
 
 #include "../plat-omap/sram.h"
 
+#include "soc.h"
 #include "iomap.h"
 #include "clock.h"
 #include "opp.h"

arch/arm/mach-omap2/board-2430sdp.c

@@ -35,7 +35,6 @@
 
 #include "common.h"
 #include "gpmc.h"
-#include <plat/usb.h>
 #include "gpmc-smc91x.h"
 
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-3430sdp.c

@@ -30,7 +30,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/usb.h>
 #include "common.h"
 #include <plat-omap/dma-omap.h>
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-3630sdp.c

@@ -18,7 +18,6 @@
 
 #include "common.h"
 #include "gpmc-smc91x.h"
-#include <plat/usb.h>
 
 #include "board-zoom.h"
 

arch/arm/mach-omap2/board-4430sdp.c

@@ -27,6 +27,7 @@
 #include <linux/leds.h>
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
+#include <linux/usb/musb.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -34,7 +35,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include "omap4-keypad.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-nokia-dsi.h>

arch/arm/mach-omap2/board-am3517crane.c

@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 
 #include "am35xx-emac.h"
 #include "mux.h"

arch/arm/mach-omap2/board-am3517evm.c

@@ -25,6 +25,7 @@
 #include <linux/can/platform/ti_hecc.h>
 #include <linux/davinci_emac.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/musb.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include "am35xx.h"
@@ -33,7 +34,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>

arch/arm/mach-omap2/board-cm-t35.c

@@ -38,10 +38,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include "gpmc.h"
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
@@ -49,10 +46,12 @@
 
 #include <mach/hardware.h>
 
+#include "common.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc.h"
 #include "gpmc-nand.h"
 
 #define CM_T35_GPIO_PENDOWN		57

arch/arm/mach-omap2/board-cm-t3517.c

@@ -39,7 +39,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include "gpmc.h"
 

arch/arm/mach-omap2/board-devkit8000.c

@@ -41,7 +41,6 @@
 #include "common.h"
 #include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>

arch/arm/mach-omap2/board-igep0020.c

@@ -29,14 +29,12 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include "common.h"
-#include "gpmc.h"
-#include <plat/usb.h>
-
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 
+#include "common.h"
+#include "gpmc.h"
 #include "mux.h"
 #include "hsmmc.h"
 #include "sdram-numonyx-m65kxxxxam.h"

arch/arm/mach-omap2/board-ldp.c

@@ -35,9 +35,8 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include "gpmc.h"
 #include "board-zoom.h"
-#include <plat/usb.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-omap3beagle.c

@@ -38,14 +38,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
-#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
-#include "omap_device.h"
 
+#include "common.h"
+#include "omap_device.h"
+#include "gpmc.h"
 #include "soc.h"
 #include "mux.h"
 #include "hsmmc.h"

arch/arm/mach-omap2/board-omap3evm.c

@@ -32,6 +32,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/musb.h>
 #include <linux/usb/nop-usb-xceiv.h>
 #include <linux/smsc911x.h>
 
@@ -45,7 +46,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/usb.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include "common.h"
 #include <linux/platform_data/spi-omap2-mcspi.h>

arch/arm/mach-omap2/board-omap3logic.c

@@ -34,8 +34,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/usb.h>
-
 #include "common.h"
 #include "mux.h"
 #include "hsmmc.h"

arch/arm/mach-omap2/board-omap3pandora.c

@@ -42,7 +42,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 

arch/arm/mach-omap2/board-omap3stalker.c

@@ -42,7 +42,6 @@
 #include "common.h"
 #include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -46,7 +46,6 @@
 #include "common.h"
 #include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/usb.h>
 
 #include "mux.h"
 #include "hsmmc.h"

arch/arm/mach-omap2/board-omap4panda.c

@@ -29,6 +29,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/ti_wilink_st.h>
+#include <linux/usb/musb.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -38,10 +39,9 @@
 #include <asm/mach/map.h>
 #include <video/omapdss.h>
 
-#include "common.h"
-#include <plat/usb.h>
 #include <video/omap-panel-tfp410.h>
 
+#include "common.h"
 #include "soc.h"
 #include "mmc.h"
 #include "hsmmc.h"

arch/arm/mach-omap2/board-overo.c

@@ -49,11 +49,11 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
-#include "gpmc.h"
-#include <plat/usb.h>
 
+#include "common.h"
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
+#include "gpmc.h"
 #include "hsmmc.h"
 #include "board-flash.h"
 #include "common-board-devices.h"

arch/arm/mach-omap2/board-rm680.c

@@ -22,11 +22,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <plat/usb.h>
-#include "gpmc.h"
 #include "common.h"
-
 #include "mux.h"
+#include "gpmc.h"
 #include "mmc.h"
 #include "hsmmc.h"
 #include "sdram-nokia.h"

arch/arm/mach-omap2/board-rx51.c

@@ -17,6 +17,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
+#include <linux/usb/musb.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -24,7 +25,6 @@
 #include <asm/mach/map.h>
 
 #include <plat-omap/dma-omap.h>
-#include <plat/usb.h>
 
 #include "common.h"
 #include "mux.h"

arch/arm/mach-omap2/board-ti8168evm.c

@@ -14,13 +14,14 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/usb/musb.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 
 static struct omap_musb_board_data musb_board_data = {
 	.set_phy_power	= ti81xx_musb_phy_power,

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/usb.h>
 
 #include "board-zoom.h"
 

arch/arm/mach-omap2/board-zoom.c

@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include <plat/usb.h>
 
 #include "board-zoom.h"
 

arch/arm/mach-omap2/common.h

@@ -39,6 +39,8 @@
 #include "i2c.h"
 #include "serial.h"
 
+#include "usb.h"
+
 #define OMAP_INTC_START		NR_IRQS
 
 #ifdef CONFIG_SOC_OMAP2420

arch/arm/mach-omap2/omap_phy_internal.c

@@ -27,11 +27,11 @@
 #include <linux/io.h>
 #include <linux/err.h>
 #include <linux/usb.h>
-
-#include <plat/usb.h>
+#include <linux/usb/musb.h>
 
 #include "soc.h"
 #include "control.h"
+#include "usb.h"
 
 void am35x_musb_reset(void)
 {

arch/arm/mach-omap2/twl-common.c

@@ -26,8 +26,6 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 
-#include <plat/usb.h>
-
 #include "soc.h"
 #include "twl-common.h"
 #include "pm.h"

arch/arm/mach-omap2/usb-host.c

@@ -25,11 +25,10 @@
 
 #include <asm/io.h>
 
-#include <plat/usb.h>
 #include "soc.h"
 #include "omap_device.h"
-
 #include "mux.h"
+#include "usb.h"
 
 #ifdef CONFIG_MFD_OMAP_USB_HOST
 

arch/arm/mach-omap2/usb-musb.c

@@ -25,11 +25,10 @@
 #include <linux/io.h>
 #include <linux/usb/musb.h>
 
-#include <plat/usb.h>
 #include "omap_device.h"
-
 #include "soc.h"
 #include "mux.h"
+#include "usb.h"
 
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= 1,

arch/arm/mach-omap2/usb-tusb6010.c

@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/export.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include <linux/usb/musb.h>
 

arch/arm/plat-omap/include/plat/usb.h → arch/arm/mach-omap2/usb.h

-// include/asm-arm/mach-omap/usb.h
-
-#ifndef	__ASM_ARCH_OMAP_USB_H
-#define	__ASM_ARCH_OMAP_USB_H
-
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#define OMAP3_HS_USB_PORTS	3
-
-enum usbhs_omap_port_mode {
-	OMAP_USBHS_PORT_MODE_UNUSED,
-	OMAP_EHCI_PORT_MODE_PHY,
-	OMAP_EHCI_PORT_MODE_TLL,
-	OMAP_EHCI_PORT_MODE_HSIC,
-	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
-	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
-};
-
-struct usbhs_omap_board_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-
-	/* have to be valid if phy_reset is true and portx is in phy mode */
-	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
-
-	/* Set this to true for ES2.x silicon */
-	unsigned			es2_compatibility:1;
-
-	unsigned			phy_reset:1;
-
-	/*
-	 * Regulators for USB PHYs.
-	 * Each PHY can have a separate regulator.
-	 */
-	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
-};
-
-#ifdef CONFIG_ARCH_OMAP2PLUS
-
-struct ehci_hcd_omap_platform_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
-	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
-	unsigned			phy_reset:1;
-};
-
-struct ohci_hcd_omap_platform_data {
-	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
-	unsigned			es2_compatibility:1;
-};
-
-struct usbhs_omap_platform_data {
-	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
-
-	struct ehci_hcd_omap_platform_data	*ehci_data;
-	struct ohci_hcd_omap_platform_data	*ohci_data;
-};
-
-struct usbtll_omap_platform_data {
-	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
-};
-/*-------------------------------------------------------------------------*/
-
-struct omap_musb_board_data {
-	u8	interface_type;
-	u8	mode;
-	u16	power;
-	unsigned extvbus:1;
-	void	(*set_phy_power)(u8 on);
-	void	(*clear_irq)(void);
-	void	(*set_mode)(u8 mode);
-	void	(*reset)(void);
-};
-
-enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
-
-extern void usb_musb_init(struct omap_musb_board_data *board_data);
-
-extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern int omap_tll_enable(void);
-extern int omap_tll_disable(void);
-
-extern int omap4430_phy_power(struct device *dev, int ID, int on);
-extern int omap4430_phy_set_clk(struct device *dev, int on);
-extern int omap4430_phy_init(struct device *dev);
-extern int omap4430_phy_exit(struct device *dev);
-extern int omap4430_phy_suspend(struct device *dev, int suspend);
-
-#endif
-
-extern void am35x_musb_reset(void);
-extern void am35x_musb_phy_power(u8 on);
-extern void am35x_musb_clear_irq(void);
-extern void am35x_set_mode(u8 musb_mode);
-extern void ti81xx_musb_phy_power(u8 on);
+#include <linux/platform_data/usb-omap.h>
 
 /* AM35x */
 /* USB 2.0 PHY Control */
@@ -156,24 +53,30 @@ extern void ti81xx_musb_phy_power(u8 on);
 #define USBPHY_OTGSESSEND_EN	(1 << 20)
 #define USBPHY_DATA_POLARITY	(1 << 23)
 
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
-u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
-u32 omap1_usb1_init(unsigned nwires);
-u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
-#else
-static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
-{
-	return 0;
-}
-static inline u32 omap1_usb1_init(unsigned nwires)
-{
-	return 0;
+struct usbhs_omap_board_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+
+	/* have to be valid if phy_reset is true and portx is in phy mode */
+	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
 
-}
-static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
-{
-	return 0;
-}
-#endif
+	/* Set this to true for ES2.x silicon */
+	unsigned			es2_compatibility:1;
+
+	unsigned			phy_reset:1;
+
+	/*
+	 * Regulators for USB PHYs.
+	 * Each PHY can have a separate regulator.
+	 */
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
+};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+extern void ti81xx_musb_phy_power(u8 on);
 
-#endif	/* __ASM_ARCH_OMAP_USB_H */

drivers/mfd/omap-usb-host.c

@@ -26,9 +26,12 @@
 #include <linux/spinlock.h>
 #include <linux/gpio.h>
 #include <plat/cpu.h>
-#include <plat/usb.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/usb-omap.h>
 #include <linux/pm_runtime.h>
 
+#include "omap-usb.h"
+
 #define USBHS_DRIVER_NAME	"usbhs_omap"
 #define OMAP_EHCI_DEVICE	"ehci-omap"
 #define OMAP_OHCI_DEVICE	"ohci-omap3"

drivers/mfd/omap-usb-tll.c

@@ -25,8 +25,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/err.h>
-#include <plat/usb.h>
 #include <linux/pm_runtime.h>
+#include <linux/platform_data/usb-omap.h>
 
 #define USBTLL_DRIVER_NAME	"usbhs_tll"
 

drivers/mfd/omap-usb.h

+extern int omap_tll_enable(void);
+extern int omap_tll_disable(void);

drivers/usb/host/ehci-omap.c

@@ -39,12 +39,13 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/ulpi.h>
-#include <plat/usb.h>
 #include <linux/regulator/consumer.h>
 #include <linux/pm_runtime.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 
+#include <linux/platform_data/usb-omap.h>
+
 /* EHCI Register Set */
 #define EHCI_INSNREG04					(0xA0)
 #define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)

drivers/usb/host/ohci-omap3.c

@@ -30,7 +30,6 @@
  */
 
 #include <linux/platform_device.h>
-#include <plat/usb.h>
 #include <linux/pm_runtime.h>
 
 /*-------------------------------------------------------------------------*/

drivers/usb/musb/am35x.c

@@ -34,8 +34,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/usb/nop-usb-xceiv.h>
-
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include "musb_core.h"
 

drivers/usb/musb/musb_dsps.c

@@ -38,13 +38,12 @@
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
 #include <linux/usb/nop-usb-xceiv.h>
+#include <linux/platform_data/usb-omap.h>
 
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_address.h>
 
-#include <plat/usb.h>
-
 #include "musb_core.h"
 
 #ifdef CONFIG_OF

drivers/usb/musb/omap2430.h

@@ -10,7 +10,7 @@
 #ifndef __MUSB_OMAP243X_H__
 #define __MUSB_OMAP243X_H__
 
-#include <plat/usb.h>
+#include <linux/platform_data/usb-omap.h>
 
 /*
  * OMAP2430-specific definitions

include/linux/platform_data/usb-omap.h

+/*
+ * usb-omap.h - Platform data for the various OMAP USB IPs
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This software is distributed under the terms of the GNU General Public
+ * License ("GPL") version 2, as published by the Free Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#define OMAP3_HS_USB_PORTS	3
+
+enum usbhs_omap_port_mode {
+	OMAP_USBHS_PORT_MODE_UNUSED,
+	OMAP_EHCI_PORT_MODE_PHY,
+	OMAP_EHCI_PORT_MODE_TLL,
+	OMAP_EHCI_PORT_MODE_HSIC,
+	OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+	OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
+};
+
+struct usbtll_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+};
+
+struct ehci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	int				reset_gpio_port[OMAP3_HS_USB_PORTS];
+	struct regulator		*regulator[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+};
+
+struct ohci_hcd_omap_platform_data {
+	enum usbhs_omap_port_mode	port_mode[OMAP3_HS_USB_PORTS];
+	unsigned			es2_compatibility:1;
+};
+
+struct usbhs_omap_platform_data {
+	enum usbhs_omap_port_mode		port_mode[OMAP3_HS_USB_PORTS];
+
+	struct ehci_hcd_omap_platform_data	*ehci_data;
+	struct ohci_hcd_omap_platform_data	*ohci_data;
+};
+
+/*-------------------------------------------------------------------------*/
+
+struct omap_musb_board_data {
+	u8	interface_type;
+	u8	mode;
+	u16	power;
+	unsigned extvbus:1;
+	void	(*set_phy_power)(u8 on);
+	void	(*clear_irq)(void);
+	void	(*set_mode)(u8 mode);
+	void	(*reset)(void);
+};
+
+enum musb_interface {
+	MUSB_INTERFACE_ULPI,
+	MUSB_INTERFACE_UTMI
+};