提交 6c777e87 编写于 作者: B Bjorn Helgaas

Revert "PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()"

991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and
pcibios_free_irq()") appeared in v4.3 and helps support IOAPIC hotplug.

Олег reported that the Elcus-1553 TA1-PCI driver worked in v4.2 but not
v4.3 and bisected it to 991de2e5.  Sunjin reported that the RocketRAID
272x driver worked in v4.2 but not v4.3.  In both cases booting with
"pci=routirq" is a workaround.

I think the problem is that after 991de2e5, we no longer call
pcibios_enable_irq() for upstream bridges.  Prior to 991de2e5, when a
driver called pci_enable_device(), we recursively called
pcibios_enable_irq() for upstream bridges via pci_enable_bridge().

After 991de2e5, we call pcibios_enable_irq() from pci_device_probe()
instead of the pci_enable_device() path, which does *not* call
pcibios_enable_irq() for upstream bridges.

Revert 991de2e5 to fix these driver regressions.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=111211
Fixes: 991de2e5 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()")
Reported-and-tested-by: NОлег Мороз <oleg.moroz@mcc.vniiem.ru>
Reported-by: NSunjin Yang <fan4326@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRafael J. Wysocki <rafael@kernel.org>
CC: Jiang Liu <jiang.liu@linux.intel.com>
上级 67b4eab9
......@@ -93,6 +93,8 @@ extern raw_spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
extern void (*pcibios_disable_irq)(struct pci_dev *dev);
extern bool mp_should_keep_irq(struct device *dev);
struct pci_raw_ops {
int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val);
......
......@@ -711,20 +711,22 @@ int pcibios_add_device(struct pci_dev *dev)
return 0;
}
int pcibios_alloc_irq(struct pci_dev *dev)
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
return pcibios_enable_irq(dev);
}
int err;
void pcibios_free_irq(struct pci_dev *dev)
{
if (pcibios_disable_irq)
pcibios_disable_irq(dev);
if ((err = pci_enable_resources(dev, mask)) < 0)
return err;
if (!pci_dev_msi_enabled(dev))
return pcibios_enable_irq(dev);
return 0;
}
int pcibios_enable_device(struct pci_dev *dev, int mask)
void pcibios_disable_device (struct pci_dev *dev)
{
return pci_enable_resources(dev, mask);
if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
pcibios_disable_irq(dev);
}
int pci_ext_cfg_avail(void)
......
......@@ -256,13 +256,10 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
static void intel_mid_pci_irq_disable(struct pci_dev *dev)
{
if (dev->irq_managed && dev->irq > 0) {
if (!mp_should_keep_irq(&dev->dev) && dev->irq_managed &&
dev->irq > 0) {
mp_unmap_irq(dev->irq);
dev->irq_managed = 0;
/*
* Don't reset dev->irq here, otherwise
* intel_mid_pci_irq_enable() will fail on next call.
*/
}
}
......
......@@ -1257,9 +1257,22 @@ static int pirq_enable_irq(struct pci_dev *dev)
return 0;
}
bool mp_should_keep_irq(struct device *dev)
{
if (dev->power.is_prepared)
return true;
#ifdef CONFIG_PM
if (dev->power.runtime_status == RPM_SUSPENDING)
return true;
#endif
return false;
}
static void pirq_disable_irq(struct pci_dev *dev)
{
if (io_apic_assign_pci_irqs && dev->irq_managed && dev->irq) {
if (io_apic_assign_pci_irqs && !mp_should_keep_irq(&dev->dev) &&
dev->irq_managed && dev->irq) {
mp_unmap_irq(dev->irq);
dev->irq = 0;
dev->irq_managed = 0;
......
......@@ -478,6 +478,14 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
if (!pin || !dev->irq_managed || dev->irq <= 0)
return;
/* Keep IOAPIC pin configuration when suspending */
if (dev->dev.power.is_prepared)
return;
#ifdef CONFIG_PM
if (dev->dev.power.runtime_status == RPM_SUSPENDING)
return;
#endif
entry = acpi_pci_irq_lookup(dev, pin);
if (!entry)
return;
......@@ -498,6 +506,5 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
if (gsi >= 0) {
acpi_unregister_gsi(gsi);
dev->irq_managed = 0;
dev->irq = 0;
}
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册