brcmfmac: disable packet filtering in promiscuous mode

Disable arp and nd offload to allow all packets sending to host.
Reported-by: NPhil Elwell <phil@raspberrypi.org>
Tested-by: NPhil Elwell <phil@raspberrypi.org>
Reviewed-by: NArend Van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NFranky Lin <franky.lin@broadcom.com>
Signed-off-by: NArend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c

@@ -472,47 +472,6 @@ send_key_to_dongle(struct brcmf_if *ifp, struct brcmf_wsec_key *key)
 	return err;
 }
 
-static s32
-brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable)
-{
-	s32 err;
-	u32 mode;
-
-	if (enable)
-		mode = BRCMF_ARP_OL_AGENT | BRCMF_ARP_OL_PEER_AUTO_REPLY;
-	else
-		mode = 0;
-
-	/* Try to set and enable ARP offload feature, this may fail, then it  */
-	/* is simply not supported and err 0 will be returned                 */
-	err = brcmf_fil_iovar_int_set(ifp, "arp_ol", mode);
-	if (err) {
-		brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n",
-			  mode, err);
-		err = 0;
-	} else {
-		err = brcmf_fil_iovar_int_set(ifp, "arpoe", enable);
-		if (err) {
-			brcmf_dbg(TRACE, "failed to configure (%d) ARP offload err = %d\n",
-				  enable, err);
-			err = 0;
-		} else
-			brcmf_dbg(TRACE, "successfully configured (%d) ARP offload to 0x%x\n",
-				  enable, mode);
-	}
-
-	err = brcmf_fil_iovar_int_set(ifp, "ndoe", enable);
-	if (err) {
-		brcmf_dbg(TRACE, "failed to configure (%d) ND offload err = %d\n",
-			  enable, err);
-		err = 0;
-	} else
-		brcmf_dbg(TRACE, "successfully configured (%d) ND offload to 0x%x\n",
-			  enable, mode);
-
-	return err;
-}
-
 static void
 brcmf_cfg80211_update_proto_addr_mode(struct wireless_dev *wdev)
 {

drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c

@@ -71,6 +71,43 @@ struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx)
 	return ifp;
 }
 
+void brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable)
+{
+	s32 err;
+	u32 mode;
+
+	if (enable)
+		mode = BRCMF_ARP_OL_AGENT | BRCMF_ARP_OL_PEER_AUTO_REPLY;
+	else
+		mode = 0;
+
+	/* Try to set and enable ARP offload feature, this may fail, then it  */
+	/* is simply not supported and err 0 will be returned                 */
+	err = brcmf_fil_iovar_int_set(ifp, "arp_ol", mode);
+	if (err) {
+		brcmf_dbg(TRACE, "failed to set ARP offload mode to 0x%x, err = %d\n",
+			  mode, err);
+	} else {
+		err = brcmf_fil_iovar_int_set(ifp, "arpoe", enable);
+		if (err) {
+			brcmf_dbg(TRACE, "failed to configure (%d) ARP offload err = %d\n",
+				  enable, err);
+		} else {
+			brcmf_dbg(TRACE, "successfully configured (%d) ARP offload to 0x%x\n",
+				  enable, mode);
+		}
+	}
+
+	err = brcmf_fil_iovar_int_set(ifp, "ndoe", enable);
+	if (err) {
+		brcmf_dbg(TRACE, "failed to configure (%d) ND offload err = %d\n",
+			  enable, err);
+	} else {
+		brcmf_dbg(TRACE, "successfully configured (%d) ND offload to 0x%x\n",
+			  enable, mode);
+	}
+}
+
 static void _brcmf_set_multicast_list(struct work_struct *work)
 {
 	struct brcmf_if *ifp;
@@ -134,6 +171,7 @@ static void _brcmf_set_multicast_list(struct work_struct *work)
 	if (err < 0)
 		brcmf_err("Setting BRCMF_C_SET_PROMISC failed, %d\n",
 			  err);
+	brcmf_configure_arp_nd_offload(ifp, !cmd_value);
 }
 
 #if IS_ENABLED(CONFIG_IPV6)

drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h

@@ -203,6 +203,7 @@ int brcmf_netdev_wait_pend8021x(struct brcmf_if *ifp);
 /* Return pointer to interface name */
 char *brcmf_ifname(struct brcmf_if *ifp);
 struct brcmf_if *brcmf_get_ifp(struct brcmf_pub *drvr, int ifidx);
+void brcmf_configure_arp_nd_offload(struct brcmf_if *ifp, bool enable);
 int brcmf_net_attach(struct brcmf_if *ifp, bool rtnl_locked);
 struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, s32 bsscfgidx, s32 ifidx,
 			      bool is_p2pdev, const char *name, u8 *mac_addr);