提交 6c119ff4 编写于 作者: H Henk Vergonet 提交者: Mauro Carvalho Chehab

V4L/DVB (13002): Adds support for Zolid Hybrid PCI card:

http://linuxtv.org/wiki/index.php/Zolid_Hybrid_TV_Tuner

test status analog (PAL-B):
- Sometimes picture is noisy, but it becomes crystal clear after
  switching between channels. (happens for example at 687.25 Mhz)
- On a lower frequency (511.25 Mhz) the picture is always sharp, but
  lacks colour.
- No sound problems.
- radio untested.

Digital:
- DVB-T/H stream reception works.
- Would expect to see some more channels in the higher frequency region.

Overall is the impression that sensitivity still needs improvement
both in analog and digital modes.
Signed-off-by: NHenk Vergonet <Henk.Vergonet@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 2d21ffe0
......@@ -171,3 +171,4 @@
170 -> AverMedia AverTV Studio 505 [1461:a115]
171 -> Beholder BeholdTV X7 [5ace:7595]
172 -> RoverMedia TV Link Pro FM [19d1:0138]
173 -> Zolid Hybrid TV Tuner PCI [1131:2004]
......@@ -5257,6 +5257,27 @@ struct saa7134_board saa7134_boards[] = {
.amux = TV,
},
},
[SAA7134_BOARD_ZOLID_HYBRID_PCI] = {
.name = "Zolid Hybrid TV Tuner PCI",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.tuner_config = 0,
.mpeg = SAA7134_MPEG_DVB,
.ts_type = SAA7134_MPEG_TS_PARALLEL,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
} },
.radio = { /* untested */
.name = name_radio,
.amux = TV,
},
},
};
......@@ -6389,6 +6410,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x19d1, /* RoverMedia */
.subdevice = 0x0138, /* LifeView FlyTV Prime30 OEM */
.driver_data = SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM,
}, {
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = PCI_VENDOR_ID_PHILIPS,
.subdevice = 0x2004,
.driver_data = SAA7134_BOARD_ZOLID_HYBRID_PCI,
}, {
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
......
......@@ -1014,6 +1014,22 @@ static struct tda829x_config tda829x_no_probe = {
.probe_tuner = TDA829X_DONT_PROBE,
};
static struct tda10048_config zolid_tda10048_config = {
.demod_address = 0x10 >> 1,
.output_mode = TDA10048_PARALLEL_OUTPUT,
.fwbulkwritelen = TDA10048_BULKWRITE_200,
.inversion = TDA10048_INVERSION_ON,
.dtv6_if_freq_khz = TDA10048_IF_3300,
.dtv7_if_freq_khz = TDA10048_IF_3500,
.dtv8_if_freq_khz = TDA10048_IF_4000,
.clk_freq_khz = TDA10048_CLK_16000,
.disable_gate_access = 1,
};
static struct tda18271_config zolid_tda18271_config = {
.gate = TDA18271_GATE_ANALOG,
};
/* ==================================================================
* Core code
*/
......@@ -1488,6 +1504,19 @@ static int dvb_init(struct saa7134_dev *dev)
wprintk("%s: No zl10039 found!\n",
__func__);
break;
case SAA7134_BOARD_ZOLID_HYBRID_PCI:
fe0->dvb.frontend = dvb_attach(tda10048_attach,
&zolid_tda10048_config,
&dev->i2c_adap);
if (fe0->dvb.frontend != NULL) {
dvb_attach(tda829x_attach, fe0->dvb.frontend,
&dev->i2c_adap, 0x4b,
&tda829x_no_probe);
dvb_attach(tda18271_attach, fe0->dvb.frontend,
0x60, &dev->i2c_adap,
&zolid_tda18271_config);
}
break;
default:
wprintk("Huh? unknown DVB card?\n");
......
......@@ -296,6 +296,7 @@ struct saa7134_format {
#define SAA7134_BOARD_AVERMEDIA_STUDIO_505 170
#define SAA7134_BOARD_BEHOLD_X7 171
#define SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM 172
#define SAA7134_BOARD_ZOLID_HYBRID_PCI 173
#define SAA7134_MAXBOARDS 32
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册