提交 6c0c9a3d 编写于 作者: T Takashi Iwai

Merge tag 'asoc-v3.16-rc1' of...

Merge tag 'asoc-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.16

Quite a few build coverage fixes in here among the usual small driver
fixes includling the sigmadsp change from Lars - moving the driver to
separate modules per bus (which is basically just code motion) avoids
issues with some combinations of buses being enabled.
......@@ -225,11 +225,11 @@ config SND_SOC_ADAU1373
config SND_SOC_ADAU1701
tristate "Analog Devices ADAU1701 CODEC"
depends on I2C
select SND_SOC_SIGMADSP
select SND_SOC_SIGMADSP_I2C
config SND_SOC_ADAU17X1
tristate
select SND_SOC_SIGMADSP
select SND_SOC_SIGMADSP_REGMAP
config SND_SOC_ADAU1761
tristate
......@@ -476,6 +476,14 @@ config SND_SOC_SIGMADSP
tristate
select CRC32
config SND_SOC_SIGMADSP_I2C
tristate
select SND_SOC_SIGMADSP
config SND_SOC_SIGMADSP_REGMAP
tristate
select SND_SOC_SIGMADSP
config SND_SOC_SIRF_AUDIO_CODEC
tristate "SiRF SoC internal audio codec"
select REGMAP_MMIO
......
......@@ -77,6 +77,8 @@ snd-soc-sgtl5000-objs := sgtl5000.o
snd-soc-alc5623-objs := alc5623.o
snd-soc-alc5632-objs := alc5632.o
snd-soc-sigmadsp-objs := sigmadsp.o
snd-soc-sigmadsp-i2c-objs := sigmadsp-i2c.o
snd-soc-sigmadsp-regmap-objs := sigmadsp-regmap.o
snd-soc-si476x-objs := si476x.o
snd-soc-sirf-audio-codec-objs := sirf-audio-codec.o
snd-soc-sn95031-objs := sn95031.o
......@@ -240,6 +242,8 @@ obj-$(CONFIG_SND_SOC_RT5651) += snd-soc-rt5651.o
obj-$(CONFIG_SND_SOC_RT5677) += snd-soc-rt5677.o
obj-$(CONFIG_SND_SOC_SGTL5000) += snd-soc-sgtl5000.o
obj-$(CONFIG_SND_SOC_SIGMADSP) += snd-soc-sigmadsp.o
obj-$(CONFIG_SND_SOC_SIGMADSP_I2C) += snd-soc-sigmadsp-i2c.o
obj-$(CONFIG_SND_SOC_SIGMADSP_REGMAP) += snd-soc-sigmadsp-regmap.o
obj-$(CONFIG_SND_SOC_SI476X) += snd-soc-si476x.o
obj-$(CONFIG_SND_SOC_SN95031) +=snd-soc-sn95031.o
obj-$(CONFIG_SND_SOC_SPDIF) += snd-soc-spdif-rx.o snd-soc-spdif-tx.o
......
/*
* Load Analog Devices SigmaStudio firmware files
*
* Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/i2c.h>
#include <linux/export.h>
#include <linux/module.h>
#include "sigmadsp.h"
static int sigma_action_write_i2c(void *control_data,
const struct sigma_action *sa, size_t len)
{
return i2c_master_send(control_data, (const unsigned char *)&sa->addr,
len);
}
int process_sigma_firmware(struct i2c_client *client, const char *name)
{
struct sigma_firmware ssfw;
ssfw.control_data = client;
ssfw.write = sigma_action_write_i2c;
return _process_sigma_firmware(&client->dev, &ssfw, name);
}
EXPORT_SYMBOL(process_sigma_firmware);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("SigmaDSP I2C firmware loader");
MODULE_LICENSE("GPL");
/*
* Load Analog Devices SigmaStudio firmware files
*
* Copyright 2009-2011 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/regmap.h>
#include <linux/export.h>
#include <linux/module.h>
#include "sigmadsp.h"
static int sigma_action_write_regmap(void *control_data,
const struct sigma_action *sa, size_t len)
{
return regmap_raw_write(control_data, be16_to_cpu(sa->addr),
sa->payload, len - 2);
}
int process_sigma_firmware_regmap(struct device *dev, struct regmap *regmap,
const char *name)
{
struct sigma_firmware ssfw;
ssfw.control_data = regmap;
ssfw.write = sigma_action_write_regmap;
return _process_sigma_firmware(dev, &ssfw, name);
}
EXPORT_SYMBOL(process_sigma_firmware_regmap);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("SigmaDSP regmap firmware loader");
MODULE_LICENSE("GPL");
......@@ -34,23 +34,6 @@ enum {
SIGMA_ACTION_END,
};
struct sigma_action {
u8 instr;
u8 len_hi;
__le16 len;
__be16 addr;
unsigned char payload[];
} __packed;
struct sigma_firmware {
const struct firmware *fw;
size_t pos;
void *control_data;
int (*write)(void *control_data, const struct sigma_action *sa,
size_t len);
};
static inline u32 sigma_action_len(struct sigma_action *sa)
{
return (sa->len_hi << 16) | le16_to_cpu(sa->len);
......@@ -138,7 +121,7 @@ process_sigma_actions(struct sigma_firmware *ssfw)
return 0;
}
static int _process_sigma_firmware(struct device *dev,
int _process_sigma_firmware(struct device *dev,
struct sigma_firmware *ssfw, const char *name)
{
int ret;
......@@ -197,50 +180,6 @@ static int _process_sigma_firmware(struct device *dev,
return ret;
}
#if IS_ENABLED(CONFIG_I2C)
static int sigma_action_write_i2c(void *control_data,
const struct sigma_action *sa, size_t len)
{
return i2c_master_send(control_data, (const unsigned char *)&sa->addr,
len);
}
int process_sigma_firmware(struct i2c_client *client, const char *name)
{
struct sigma_firmware ssfw;
ssfw.control_data = client;
ssfw.write = sigma_action_write_i2c;
return _process_sigma_firmware(&client->dev, &ssfw, name);
}
EXPORT_SYMBOL(process_sigma_firmware);
#endif
#if IS_ENABLED(CONFIG_REGMAP)
static int sigma_action_write_regmap(void *control_data,
const struct sigma_action *sa, size_t len)
{
return regmap_raw_write(control_data, be16_to_cpu(sa->addr),
sa->payload, len - 2);
}
int process_sigma_firmware_regmap(struct device *dev, struct regmap *regmap,
const char *name)
{
struct sigma_firmware ssfw;
ssfw.control_data = regmap;
ssfw.write = sigma_action_write_regmap;
return _process_sigma_firmware(dev, &ssfw, name);
}
EXPORT_SYMBOL(process_sigma_firmware_regmap);
#endif
EXPORT_SYMBOL_GPL(_process_sigma_firmware);
MODULE_LICENSE("GPL");
......@@ -12,6 +12,26 @@
#include <linux/device.h>
#include <linux/regmap.h>
struct sigma_action {
u8 instr;
u8 len_hi;
__le16 len;
__be16 addr;
unsigned char payload[];
} __packed;
struct sigma_firmware {
const struct firmware *fw;
size_t pos;
void *control_data;
int (*write)(void *control_data, const struct sigma_action *sa,
size_t len);
};
int _process_sigma_firmware(struct device *dev,
struct sigma_firmware *ssfw, const char *name);
struct i2c_client;
extern int process_sigma_firmware(struct i2c_client *client, const char *name);
......
......@@ -923,8 +923,8 @@ static int fsl_soc_dma_probe(struct platform_device *pdev)
dma->dai.pcm_free = fsl_dma_free_dma_buffers;
/* Store the SSI-specific information that we need */
dma->ssi_stx_phys = res.start + offsetof(struct ccsr_ssi, stx0);
dma->ssi_srx_phys = res.start + offsetof(struct ccsr_ssi, srx0);
dma->ssi_stx_phys = res.start + CCSR_SSI_STX0;
dma->ssi_srx_phys = res.start + CCSR_SSI_SRX0;
iprop = of_get_property(ssi_np, "fsl,fifo-depth", NULL);
if (iprop)
......
......@@ -762,7 +762,7 @@ static int fsl_spdif_vbit_get(struct snd_kcontrol *kcontrol,
struct regmap *regmap = spdif_priv->regmap;
u32 val;
val = regmap_read(regmap, REG_SPDIF_SIS, &val);
regmap_read(regmap, REG_SPDIF_SIS, &val);
ucontrol->value.integer.value[0] = (val & INT_VAL_NOGOOD) != 0;
regmap_write(regmap, REG_SPDIF_SIC, INT_VAL_NOGOOD);
......@@ -1076,7 +1076,7 @@ static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv,
goto out;
} else if (arate / rate[index] == 1) {
/* A little bigger than expect */
sub = (arate - rate[index]) * 100000;
sub = (u64)(arate - rate[index]) * 100000;
do_div(sub, rate[index]);
if (sub >= savesub)
continue;
......@@ -1086,7 +1086,7 @@ static u32 fsl_spdif_txclk_caldiv(struct fsl_spdif_priv *spdif_priv,
spdif_priv->txrate[index] = arate;
} else if (rate[index] / arate == 1) {
/* A little smaller than expect */
sub = (rate[index] - arate) * 100000;
sub = (u64)(rate[index] - arate) * 100000;
do_div(sub, rate[index]);
if (sub >= savesub)
continue;
......
......@@ -11,6 +11,7 @@ config SND_PXA2XX_SOC
config SND_MMP_SOC
bool "Soc Audio for Marvell MMP chips"
depends on ARCH_MMP
select MMP_SRAM
select SND_SOC_GENERIC_DMAENGINE_PCM
select SND_ARM
help
......@@ -40,7 +41,7 @@ config SND_MMP_SOC_SSPA
config SND_PXA2XX_SOC_CORGI
tristate "SoC Audio support for Sharp Zaurus SL-C7x0"
depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx
depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx && I2C
select SND_PXA2XX_SOC_I2S
select SND_SOC_WM8731
help
......@@ -49,7 +50,7 @@ config SND_PXA2XX_SOC_CORGI
config SND_PXA2XX_SOC_SPITZ
tristate "SoC Audio support for Sharp Zaurus SL-Cxx00"
depends on SND_PXA2XX_SOC && PXA_SHARP_Cxx00
depends on SND_PXA2XX_SOC && PXA_SHARP_Cxx00 && I2C
select SND_PXA2XX_SOC_I2S
select SND_SOC_WM8750
help
......@@ -58,7 +59,7 @@ config SND_PXA2XX_SOC_SPITZ
config SND_PXA2XX_SOC_Z2
tristate "SoC Audio support for Zipit Z2"
depends on SND_PXA2XX_SOC && MACH_ZIPIT2
depends on SND_PXA2XX_SOC && MACH_ZIPIT2 && I2C
select SND_PXA2XX_SOC_I2S
select SND_SOC_WM8750
help
......@@ -66,7 +67,7 @@ config SND_PXA2XX_SOC_Z2
config SND_PXA2XX_SOC_POODLE
tristate "SoC Audio support for Poodle"
depends on SND_PXA2XX_SOC && MACH_POODLE
depends on SND_PXA2XX_SOC && MACH_POODLE && I2C
select SND_PXA2XX_SOC_I2S
select SND_SOC_WM8731
help
......@@ -181,7 +182,7 @@ config SND_PXA2XX_SOC_HX4700
config SND_PXA2XX_SOC_MAGICIAN
tristate "SoC Audio support for HTC Magician"
depends on SND_PXA2XX_SOC && MACH_MAGICIAN
depends on SND_PXA2XX_SOC && MACH_MAGICIAN && I2C
select SND_PXA2XX_SOC_I2S
select SND_PXA_SOC_SSP
select SND_SOC_UDA1380
......
......@@ -315,7 +315,7 @@ static void rsnd_dma_of_name(struct rsnd_dma *dma,
dst_mod = mod[index];
} else {
src_mod = mod[index];
dst_mod = mod[index + 1];
dst_mod = mod[index - 1];
}
index = 0;
......
......@@ -2755,7 +2755,7 @@ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
unsigned int val;
int connect, change;
int connect, change, reg_change = 0;
struct snd_soc_dapm_update update;
int ret = 0;
......@@ -2773,20 +2773,23 @@ int snd_soc_dapm_put_volsw(struct snd_kcontrol *kcontrol,
mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
change = dapm_kcontrol_set_value(kcontrol, val);
if (change) {
if (reg != SND_SOC_NOPM) {
mask = mask << shift;
val = val << shift;
if (snd_soc_test_bits(codec, reg, mask, val)) {
update.kcontrol = kcontrol;
update.reg = reg;
update.mask = mask;
update.val = val;
card->update = &update;
}
if (reg != SND_SOC_NOPM) {
mask = mask << shift;
val = val << shift;
reg_change = snd_soc_test_bits(codec, reg, mask, val);
}
if (change || reg_change) {
if (reg_change) {
update.kcontrol = kcontrol;
update.reg = reg;
update.mask = mask;
update.val = val;
card->update = &update;
}
change |= reg_change;
ret = soc_dapm_mixer_update_power(card, kcontrol, connect);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册