Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6

* 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6:
  mfd: Fix omap-usb-host build failure
  mfd: Make omap-usb-host TLL mode work again
  mfd: Set MAX8997 irq pointer
  mfd: Fix initialisation of tps65910 interrupts
  mfd: Check for twl4030-madc NULL pointer
  mfd: Copy the device pointer to the twl4030-madc structure
  mfd: Rename wm8350 static gpio_set_debounce()
  mfd: Fix value of WM8994_CONFIGURE_GPIO

drivers/mfd/max8997.c

@@ -135,10 +135,13 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 	max8997->dev = &i2c->dev;
 	max8997->i2c = i2c;
 	max8997->type = id->driver_data;
+	max8997->irq = i2c->irq;
 
 	if (!pdata)
 		goto err;
 
+	max8997->irq_base = pdata->irq_base;
+	max8997->ono = pdata->ono;
 	max8997->wakeup = pdata->wakeup;
 
 	mutex_init(&max8997->iolock);
@@ -152,6 +155,8 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 
 	pm_runtime_set_active(max8997->dev);
 
+	max8997_irq_init(max8997);
+
 	mfd_add_devices(max8997->dev, -1, max8997_devs,
 			ARRAY_SIZE(max8997_devs),
 			NULL, 0);

drivers/mfd/omap-usb-host.c

@@ -17,6 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -676,7 +677,6 @@ static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count)
 				| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
 				| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
 
-			reg |= (1 << (i + 1));
 		} else
 			continue;
 

drivers/mfd/tps65910-irq.c

@@ -178,8 +178,10 @@ int tps65910_irq_init(struct tps65910 *tps65910, int irq,
 	switch (tps65910_chip_id(tps65910)) {
 	case TPS65910:
 		tps65910->irq_num = TPS65910_NUM_IRQ;
+		break;
 	case TPS65911:
 		tps65910->irq_num = TPS65911_NUM_IRQ;
+		break;
 	}
 
 	/* Register with genirq */

drivers/mfd/twl4030-madc.c

@@ -510,8 +510,9 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
 	u8 ch_msb, ch_lsb;
 	int ret;
 
-	if (!req)
+	if (!req || !twl4030_madc)
 		return -EINVAL;
+
 	mutex_lock(&twl4030_madc->lock);
 	if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) {
 		ret = -EINVAL;
@@ -706,6 +707,8 @@ static int __devinit twl4030_madc_probe(struct platform_device *pdev)
 	if (!madc)
 		return -ENOMEM;
 
+	madc->dev = &pdev->dev;
+
 	/*
 	 * Phoenix provides 2 interrupt lines. The first one is connected to
 	 * the OMAP. The other one can be connected to the other processor such

drivers/mfd/wm8350-gpio.c

@@ -37,7 +37,7 @@ static int gpio_set_dir(struct wm8350 *wm8350, int gpio, int dir)
 	return ret;
 }
 
-static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
+static int wm8350_gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
 {
 	if (db == WM8350_GPIO_DEBOUNCE_ON)
 		return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE,
@@ -210,7 +210,7 @@ int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func,
 		goto err;
 	if (gpio_set_polarity(wm8350, gpio, pol))
 		goto err;
-	if (gpio_set_debounce(wm8350, gpio, debounce))
+	if (wm8350_gpio_set_debounce(wm8350, gpio, debounce))
 		goto err;
 	if (gpio_set_dir(wm8350, gpio, dir))
 		goto err;

include/linux/mfd/wm8994/pdata.h

@@ -26,7 +26,7 @@ struct wm8994_ldo_pdata {
 	struct regulator_init_data *init_data;
 };
 
-#define WM8994_CONFIGURE_GPIO 0x8000
+#define WM8994_CONFIGURE_GPIO 0x10000
 
 #define WM8994_DRC_REGS 5
 #define WM8994_EQ_REGS  20