提交 6b0fd6c1 编写于 作者: P Paul Burton 提交者: Ralf Baechle

clk: boston: Add a driver for MIPS Boston board clocks

Add a driver for the clocks provided by the MIPS Boston board from
Imagination Technologies. 2 clocks are provided - the system clock & the
CPU clock - and each is a simple fixed rate clock whose frequency can be
determined by reading a register provided by the board.
Signed-off-by: NPaul Burton <paul.burton@imgtec.com>
Acked-by: NStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/16483/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 7461279b
......@@ -8509,6 +8509,7 @@ M: Paul Burton <paul.burton@imgtec.com>
L: linux-mips@linux-mips.org
S: Maintained
F: Documentation/devicetree/bindings/clock/img,boston-clock.txt
F: drivers/clk/imgtec/clk-boston.c
F: include/dt-bindings/clock/boston-clock.h
MIROSOUND PCM20 FM RADIO RECEIVER DRIVER
......
......@@ -219,6 +219,7 @@ config COMMON_CLK_VC5
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/imgtec/Kconfig"
source "drivers/clk/mediatek/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mvebu/Kconfig"
......
......@@ -59,6 +59,7 @@ obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_H8300) += h8300/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-y += imgtec/
obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_MACH_INGENIC) += ingenic/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
......
config COMMON_CLK_BOSTON
bool "Clock driver for MIPS Boston boards"
depends on MIPS || COMPILE_TEST
select MFD_SYSCON
---help---
Enable this to support the system & CPU clocks on the MIPS Boston
development board from Imagination Technologies. These are simple
fixed rate clocks whose rate is determined by reading a platform
provided register.
obj-$(CONFIG_COMMON_CLK_BOSTON) += clk-boston.o
/*
* Copyright (C) 2016-2017 Imagination Technologies
* Author: Paul Burton <paul.burton@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#define pr_fmt(fmt) "clk-boston: " fmt
#include <linux/clk-provider.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/mfd/syscon.h>
#include <dt-bindings/clock/boston-clock.h>
#define BOSTON_PLAT_MMCMDIV 0x30
# define BOSTON_PLAT_MMCMDIV_CLK0DIV (0xff << 0)
# define BOSTON_PLAT_MMCMDIV_INPUT (0xff << 8)
# define BOSTON_PLAT_MMCMDIV_MUL (0xff << 16)
# define BOSTON_PLAT_MMCMDIV_CLK1DIV (0xff << 24)
#define BOSTON_CLK_COUNT 3
static u32 ext_field(u32 val, u32 mask)
{
return (val & mask) >> (ffs(mask) - 1);
}
static void __init clk_boston_setup(struct device_node *np)
{
unsigned long in_freq, cpu_freq, sys_freq;
uint mmcmdiv, mul, cpu_div, sys_div;
struct clk_hw_onecell_data *onecell;
struct regmap *regmap;
struct clk_hw *hw;
int err;
regmap = syscon_node_to_regmap(np->parent);
if (IS_ERR(regmap)) {
pr_err("failed to find regmap\n");
return;
}
err = regmap_read(regmap, BOSTON_PLAT_MMCMDIV, &mmcmdiv);
if (err) {
pr_err("failed to read mmcm_div register: %d\n", err);
return;
}
in_freq = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_INPUT) * 1000000;
mul = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_MUL);
sys_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK0DIV);
sys_freq = mult_frac(in_freq, mul, sys_div);
cpu_div = ext_field(mmcmdiv, BOSTON_PLAT_MMCMDIV_CLK1DIV);
cpu_freq = mult_frac(in_freq, mul, cpu_div);
onecell = kzalloc(sizeof(*onecell) +
(BOSTON_CLK_COUNT * sizeof(struct clk_hw *)),
GFP_KERNEL);
if (!onecell)
return;
onecell->num = BOSTON_CLK_COUNT;
hw = clk_hw_register_fixed_rate(NULL, "input", NULL, 0, in_freq);
if (IS_ERR(hw)) {
pr_err("failed to register input clock: %ld\n", PTR_ERR(hw));
return;
}
onecell->hws[BOSTON_CLK_INPUT] = hw;
hw = clk_hw_register_fixed_rate(NULL, "sys", "input", 0, sys_freq);
if (IS_ERR(hw)) {
pr_err("failed to register sys clock: %ld\n", PTR_ERR(hw));
return;
}
onecell->hws[BOSTON_CLK_SYS] = hw;
hw = clk_hw_register_fixed_rate(NULL, "cpu", "input", 0, cpu_freq);
if (IS_ERR(hw)) {
pr_err("failed to register cpu clock: %ld\n", PTR_ERR(hw));
return;
}
onecell->hws[BOSTON_CLK_CPU] = hw;
err = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, onecell);
if (err)
pr_err("failed to add DT provider: %d\n", err);
}
/*
* Use CLK_OF_DECLARE so that this driver is probed early enough to provide the
* CPU frequency for use with the GIC or cop0 counters/timers.
*/
CLK_OF_DECLARE(clk_boston, "img,boston-clock", clk_boston_setup);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册