Merge tag 'asoc-v3.12-rc2' of...

Merge tag 'asoc-v3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.12

Nothing too exciting here, all driver specific except for the fix from
Liam for DPCM systems which have both front and back end DAIs which is
not yet used by anything in mainline.

Documentation/arm64/tagged-pointers.txt

@@ -18,17 +18,17 @@ this byte for application use, with the following caveats:
 	    parameters containing user virtual addresses *must* have
 	    their top byte cleared before trapping to the kernel.
 
-	(2) Tags are not guaranteed to be preserved when delivering
-	    signals. This means that signal handlers in applications
-	    making use of tags cannot rely on the tag information for
-	    user virtual addresses being maintained for fields inside
-	    siginfo_t. One exception to this rule is for signals raised
-	    in response to debug exceptions, where the tag information
+	(2) Non-zero tags are not preserved when delivering signals.
+	    This means that signal handlers in applications making use
+	    of tags cannot rely on the tag information for user virtual
+	    addresses being maintained for fields inside siginfo_t.
+	    One exception to this rule is for signals raised in response
+	    to watchpoint debug exceptions, where the tag information
 	    will be preserved.
 
 	(3) Special care should be taken when using tagged pointers,
 	    since it is likely that C compilers will not hazard two
-	    addresses differing only in the upper bits.
+	    virtual addresses differing only in the upper byte.
 
 The architecture prevents the use of a tagged PC, so the upper byte will
 be set to a sign-extension of bit 55 on exception return.

Documentation/filesystems/vfs.txt

@@ -359,11 +359,9 @@ struct inode_operations {
 	ssize_t (*listxattr) (struct dentry *, char *, size_t);
 	int (*removexattr) (struct dentry *, const char *);
 	void (*update_time)(struct inode *, struct timespec *, int);
-	int (*atomic_open)(struct inode *, struct dentry *,
+	int (*atomic_open)(struct inode *, struct dentry *, struct file *,
+			unsigned open_flag, umode_t create_mode, int *opened);
 	int (*tmpfile) (struct inode *, struct dentry *, umode_t);
-} ____cacheline_aligned;
-				struct file *, unsigned open_flag,
-				umode_t create_mode, int *opened);
 };
 
 Again, all methods are called without any locks being held, unless
@@ -470,9 +468,11 @@ otherwise noted.
   	method the filesystem can look up, possibly create and open the file in
   	one atomic operation.  If it cannot perform this (e.g. the file type
   	turned out to be wrong) it may signal this by returning 1 instead of
-  	usual 0 or -ve .  This method is only called if the last
-  	component is negative or needs lookup.  Cached positive dentries are
-  	still handled by f_op->open().
+	usual 0 or -ve .  This method is only called if the last component is
+	negative or needs lookup.  Cached positive dentries are still handled by
+	f_op->open().  If the file was created, the FILE_CREATED flag should be
+	set in "opened".  In case of O_EXCL the method must only succeed if the
+	file didn't exist and hence FILE_CREATED shall always be set on success.
 
   tmpfile: called in the end of O_TMPFILE open().  Optional, equivalent to
 	atomically creating, opening and unlinking a file in given directory.

Documentation/networking/bonding.txt

@@ -1362,6 +1362,12 @@ To add ARP targets:
 To remove an ARP target:
 # echo -192.168.0.100 > /sys/class/net/bond0/bonding/arp_ip_target
 
+To configure the interval between learning packet transmits:
+# echo 12 > /sys/class/net/bond0/bonding/lp_interval
+	NOTE: the lp_inteval is the number of seconds between instances where
+the bonding driver sends learning packets to each slaves peer switch.  The
+default interval is 1 second.
+
 Example Configuration
 ---------------------
 	We begin with the same example that is shown in section 3.3,

Documentation/scheduler/sched-design-CFS.txt

@@ -66,9 +66,7 @@ rq->cfs.load value, which is the sum of the weights of the tasks queued on the
 runqueue.
 
 CFS maintains a time-ordered rbtree, where all runnable tasks are sorted by the
-p->se.vruntime key (there is a subtraction using rq->cfs.min_vruntime to
-account for possible wraparounds).  CFS picks the "leftmost" task from this
-tree and sticks to it.
+p->se.vruntime key. CFS picks the "leftmost" task from this tree and sticks to it.
 As the system progresses forwards, the executed tasks are put into the tree
 more and more to the right --- slowly but surely giving a chance for every task
 to become the "leftmost task" and thus get on the CPU within a deterministic

Makefile

 VERSION = 3
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/arm/boot/dts/Makefile

@@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
 	am335x-bone.dtb \
+	am335x-boneblack.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
 	am43x-epos-evm.dtb

arch/arm/boot/dts/am335x-bone-common.dtsi

+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+	model = "TI AM335x BeagleBone";
+	compatible = "ti,am335x-bone", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout2_pin>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			>;
+		};
+
+		i2c0_pins: pinmux_i2c0_pins {
+			pinctrl-single,pins = <
+				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		uart0_pins: pinmux_uart0_pins {
+			pinctrl-single,pins = <
+				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		clkout2_pin: pinmux_clkout2_pin {
+			pinctrl-single,pins = <
+				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			>;
+		};
+
+		cpsw_default: cpsw_default {
+			pinctrl-single,pins = <
+				/* Slave 1 */
+				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			>;
+		};
+
+		cpsw_sleep: cpsw_sleep {
+			pinctrl-single,pins = <
+				/* Slave 1 reset value */
+				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		davinci_mdio_default: davinci_mdio_default {
+			pinctrl-single,pins = <
+				/* MDIO */
+				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			>;
+		};
+
+		davinci_mdio_sleep: davinci_mdio_sleep {
+			pinctrl-single,pins = <
+				/* MDIO reset value */
+				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+	};
+
+	ocp {
+		uart0: serial@44e09000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_pins>;
+
+			status = "okay";
+		};
+
+		musb: usb@47400000 {
+			status = "okay";
+
+			control@44e10000 {
+				status = "okay";
+			};
+
+			usb-phy@47401300 {
+				status = "okay";
+			};
+
+			usb-phy@47401b00 {
+				status = "okay";
+			};
+
+			usb@47401000 {
+				status = "okay";
+			};
+
+			usb@47401800 {
+				status = "okay";
+				dr_mode = "host";
+			};
+
+			dma-controller@07402000  {
+				status = "okay";
+			};
+		};
+
+		i2c0: i2c@44e0b000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@24 {
+				reg = <0x24>;
+			};
+
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};

arch/arm/boot/dts/am335x-bone.dts

@@ -8,258 +8,4 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
-
-/ {
-	model = "TI AM335x BeagleBone";
-	compatible = "ti,am335x-bone", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	am33xx_pinmux: pinmux@44e10800 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&clkout2_pin>;
-
-		user_leds_s0: user_leds_s0 {
-			pinctrl-single,pins = <
-				0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-				0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-				0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-				0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
-			>;
-		};
-
-		i2c0_pins: pinmux_i2c0_pins {
-			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-			>;
-		};
-
-		uart0_pins: pinmux_uart0_pins {
-			pinctrl-single,pins = <
-				0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-				0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-			>;
-		};
-
-		clkout2_pin: pinmux_clkout2_pin {
-			pinctrl-single,pins = <
-				0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-			>;
-		};
-
-		cpsw_default: cpsw_default {
-			pinctrl-single,pins = <
-				/* Slave 1 */
-				0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-				0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-				0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-				0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-				0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-				0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-				0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-				0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-				0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-				0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
-			>;
-		};
-
-		cpsw_sleep: cpsw_sleep {
-			pinctrl-single,pins = <
-				/* Slave 1 reset value */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-
-		davinci_mdio_default: davinci_mdio_default {
-			pinctrl-single,pins = <
-				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-			>;
-		};
-
-		davinci_mdio_sleep: davinci_mdio_sleep {
-			pinctrl-single,pins = <
-				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			>;
-		};
-	};
-
-	ocp {
-		uart0: serial@44e09000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins>;
-
-			status = "okay";
-		};
-
-		musb: usb@47400000 {
-			status = "okay";
-
-			control@44e10000 {
-				status = "okay";
-			};
-
-			usb-phy@47401300 {
-				status = "okay";
-			};
-
-			usb-phy@47401b00 {
-				status = "okay";
-			};
-
-			usb@47401000 {
-				status = "okay";
-			};
-
-			usb@47401800 {
-				status = "okay";
-				dr_mode = "host";
-			};
-
-			dma-controller@07402000  {
-				status = "okay";
-			};
-		};
-
-		i2c0: i2c@44e0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
-
-			status = "okay";
-			clock-frequency = <400000>;
-
-			tps: tps@24 {
-				reg = <0x24>;
-			};
-
-		};
-	};
-
-	leds {
-		pinctrl-names = "default";
-		pinctrl-0 = <&user_leds_s0>;
-
-		compatible = "gpio-leds";
-
-		led@2 {
-			label = "beaglebone:green:heartbeat";
-			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beaglebone:green:mmc0";
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@4 {
-			label = "beaglebone:green:usr2";
-			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		led@5 {
-			label = "beaglebone:green:usr3";
-			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-always-on;
-		};
-	};
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-};
+#include "am335x-bone-common.dtsi"

arch/arm/boot/dts/am335x-boneblack.dts

+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};

arch/arm/boot/dts/imx27.dtsi

@@ -187,7 +187,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000e000 0x1000>;
 				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 53>;
+				clocks = <&clks 53>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -198,7 +198,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000f000 0x1000>;
 				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 52>;
+				clocks = <&clks 52>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -309,7 +309,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x10017000 0x1000>;
 				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 51>;
+				clocks = <&clks 51>, <&clks 60>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

arch/arm/boot/dts/imx51.dtsi

@@ -474,7 +474,7 @@
 				compatible = "fsl,imx51-pata", "fsl,imx27-pata";
 				reg = <0x83fe0000 0x4000>;
 				interrupts = <70>;
-				clocks = <&clks 161>;
+				clocks = <&clks 172>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6q-pinfunc.h

@@ -207,8 +207,8 @@
 #define MX6QDL_PAD_EIM_D29__ECSPI4_SS0              0x0c8 0x3dc 0x824 0x2 0x1
 #define MX6QDL_PAD_EIM_D29__UART2_RTS_B             0x0c8 0x3dc 0x924 0x4 0x1
 #define MX6QDL_PAD_EIM_D29__UART2_CTS_B             0x0c8 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c4 0x3dc 0x000 0x4 0x0
-#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c4 0x3dc 0x924 0x4 0x1
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B         0x0c8 0x3dc 0x000 0x4 0x0
+#define MX6QDL_PAD_EIM_D29__UART2_DTE_CTS_B         0x0c8 0x3dc 0x924 0x4 0x1
 #define MX6QDL_PAD_EIM_D29__GPIO3_IO29              0x0c8 0x3dc 0x000 0x5 0x0
 #define MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC         0x0c8 0x3dc 0x8e4 0x6 0x0
 #define MX6QDL_PAD_EIM_D29__IPU1_DI0_PIN14          0x0c8 0x3dc 0x000 0x7 0x0

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -11,7 +11,7 @@
 
 / {
 	model = "TI OMAP3 BeagleBoard xM";
-	compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3";
+	compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3-igep.dtsi

@@ -48,6 +48,15 @@
 		>;
 	};
 
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
+			0x10e (PIN_INPUT | MUX_MODE0)		/* mcbsp2_clkx.mcbsp2_clkx */
+			0x110 (PIN_INPUT | MUX_MODE0)		/* mcbsp2_dr.mcbsp2.dr */
+			0x112 (PIN_OUTPUT | MUX_MODE0)		/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			0x114 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
@@ -93,6 +102,11 @@
 	clock-frequency = <400000>;
 };
 
+&mcbsp2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
 &mmc1 {
       pinctrl-names = "default";
       pinctrl-0 = <&mmc1_pins>;

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -107,6 +107,19 @@
 	 */
 		clock-frequency = <19200000>;
 	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 11 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 &omap4_pmx_wkup {
@@ -235,6 +248,33 @@
 			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
 		>;
 	};
+
+	/*
+	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
+	 * REVISIT: Are the pull-ups needed for GPIO 48 and 49?
+	 */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x26 (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a19.gpio_43 */
+			0x2c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_a22.gpio_46 */
+			0x30 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48 */
+			0x32 (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_a25.gpio_49 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_OUTPUT | MUX_MODE0)		/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -314,8 +354,12 @@
 };
 
 &mmc5 {
-	ti,non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
 	bus-width = <4>;
+	cap-power-off-card;
 };
 
 &emif1 {

arch/arm/boot/dts/omap4-sdp.dts

@@ -140,6 +140,19 @@
 			"DMic", "Digital Mic",
 			"Digital Mic", "Digital Mic1 Bias";
 	};
+
+	/* regulator for wl12xx on sdio5 */
+	wl12xx_vmmc: wl12xx_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 22 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 &omap4_pmx_wkup {
@@ -295,6 +308,26 @@
 			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
+
+	/* wl12xx GPIO output for WLAN_EN */
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x3c (PIN_OUTPUT | MUX_MODE3)		/* gpmc_nwp.gpio_54 */
+		>;
+	};
+
+	/* wl12xx GPIO inputs and SDIO pins */
+	wl12xx_pins: pinmux_wl12xx_pins {
+		pinctrl-single,pins = <
+			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
+			0x108 (PIN_OUTPUT | MUX_MODE3)		/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -420,8 +453,12 @@
 };
 
 &mmc5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wl12xx_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
 	bus-width = <4>;
-	ti,non-removable;
+	cap-power-off-card;
 };
 
 &emif1 {

arch/arm/boot/dts/omap5.dtsi

@@ -637,7 +637,7 @@
 		omap_dwc3@4a020000 {
 			compatible = "ti,dwc3";
 			ti,hwmods = "usb_otg_ss";
-			reg = <0x4a020000 0x1000>;
+			reg = <0x4a020000 0x10000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -645,17 +645,18 @@
 			ranges;
 			dwc3@4a030000 {
 				compatible = "snps,dwc3";
-				reg = <0x4a030000 0x1000>;
+				reg = <0x4a030000 0x10000>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
 				usb-phy = <&usb2_phy>, <&usb3_phy>;
 				tx-fifo-resize;
 			};
 		};
 
-		ocp2scp {
+		ocp2scp@4a080000 {
 			compatible = "ti,omap-ocp2scp";
 			#address-cells = <1>;
 			#size-cells = <1>;
+			reg = <0x4a080000 0x20>;
 			ranges;
 			ti,hwmods = "ocp2scp1";
 			usb2_phy: usb2phy@4a084000 {

arch/arm/configs/multi_v7_defconfig

@@ -36,6 +36,7 @@ CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_TEGRA_PCI=y
 CONFIG_TEGRA_EMC_SCALING_ENABLE=y
 CONFIG_ARCH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_UX500_DT=y
 CONFIG_ARCH_VEXPRESS=y
@@ -46,6 +47,7 @@ CONFIG_ARCH_ZYNQ=y
 CONFIG_SMP=y
 CONFIG_HIGHPTE=y
 CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_INET=y

arch/arm/mach-imx/clk-fixup-mux.c

@@ -90,6 +90,7 @@ struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg,
 	init.ops = &clk_fixup_mux_ops;
 	init.parent_names = parents;
 	init.num_parents = num_parents;
+	init.flags = 0;
 
 	fixup_mux->mux.reg = reg;
 	fixup_mux->mux.shift = shift;

arch/arm/mach-imx/clk-imx27.c

@@ -285,7 +285,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
 	clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc");
 	clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
-	clk_register_clkdev(clk[cpu_div], NULL, "cpufreq-cpu0.0");
+	clk_register_clkdev(clk[cpu_div], NULL, "cpu0");
 	clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
 
 	mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -328,7 +328,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
 	clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
 	clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
-	clk_register_clkdev(clk[cpu_podf], NULL, "cpufreq-cpu0.0");
+	clk_register_clkdev(clk[cpu_podf], NULL, "cpu0");
 	clk_register_clkdev(clk[iim_gate], "iim", NULL);
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
@@ -397,7 +397,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 				mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel));
 	clk[spdif1_sel] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2,
 				spdif_sel, ARRAY_SIZE(spdif_sel));
-	clk[spdif1_pred] = imx_clk_divider("spdif1_podf", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
+	clk[spdif1_pred] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3);
 	clk[spdif1_podf] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6);
 	clk[spdif1_com_sel] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1,
 				mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel));

arch/arm/mach-imx/mach-imx6q.c

@@ -233,10 +233,15 @@ static void __init imx6q_opp_check_1p2ghz(struct device *cpu_dev)
 	of_node_put(np);
 }
 
-static void __init imx6q_opp_init(struct device *cpu_dev)
+static void __init imx6q_opp_init(void)
 {
 	struct device_node *np;
+	struct device *cpu_dev = get_cpu_device(0);
 
+	if (!cpu_dev) {
+		pr_warn("failed to get cpu0 device\n");
+		return;
+	}
 	np = of_node_get(cpu_dev->of_node);
 	if (!np) {
 		pr_warn("failed to find cpu0 node\n");
@@ -268,7 +273,7 @@ static void __init imx6q_init_late(void)
 		imx6q_cpuidle_init();
 
 	if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
-		imx6q_opp_init(&imx6q_cpufreq_pdev.dev);
+		imx6q_opp_init();
 		platform_device_register(&imx6q_cpufreq_pdev);
 	}
 }

arch/arm/mach-imx/system.c

@@ -117,6 +117,17 @@ void __init imx_init_l2cache(void)
 	/* Configure the L2 PREFETCH and POWER registers */
 	val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL);
 	val |= 0x70800000;
+	/*
+	 * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0
+	 * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2
+	 * But according to ARM PL310 errata: 752271
+	 * ID: 752271: Double linefill feature can cause data corruption
+	 * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2
+	 * Workaround: The only workaround to this erratum is to disable the
+	 * double linefill feature. This is the default behavior.
+	 */
+	if (cpu_is_imx6q())
+		val &= ~(1 << 30 | 1 << 23);
 	writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL);
 	val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN;
 	writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL);

arch/arm/mach-omap2/cclock44xx_data.c

@@ -1632,7 +1632,7 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"auxclk5_src_ck",		&auxclk5_src_ck),
 	CLK(NULL,	"auxclk5_ck",			&auxclk5_ck),
 	CLK(NULL,	"auxclkreq5_ck",		&auxclkreq5_ck),
-	CLK("omap-gpmc",	"fck",			&dummy_ck),
+	CLK("50000000.gpmc",	"fck",			&dummy_ck),
 	CLK("omap_i2c.1",	"ick",			&dummy_ck),
 	CLK("omap_i2c.2",	"ick",			&dummy_ck),
 	CLK("omap_i2c.3",	"ick",			&dummy_ck),

arch/arm/mach-omap2/cpuidle44xx.c

@@ -143,7 +143,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
 	 * Call idle CPU cluster PM exit notifier chain
 	 * to restore GIC and wakeupgen context.
 	 */
-	if ((cx->mpu_state == PWRDM_POWER_RET) &&
+	if (dev->cpu == 0 && (cx->mpu_state == PWRDM_POWER_RET) &&
 		(cx->mpu_logic_state == PWRDM_POWER_OFF))
 		cpu_cluster_pm_exit();
 

arch/arm/mach-omap2/gpmc.c

@@ -1491,8 +1491,8 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	 */
 	ret = gpmc_cs_remap(cs, res.start);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
-			cs, res.start);
+		dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n",
+			cs, &res.start);
 		goto err;
 	}
 

arch/arm/mach-omap2/mux34xx.c

@@ -620,7 +620,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
 		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
 		"gpio_149", NULL, NULL, "safe_mode"),
 	_OMAP3_MUXENTRY(UART1_RX, 151,
-		"uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
+		"uart1_rx", "ssi1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
 		"gpio_151", NULL, NULL, "safe_mode"),
 	_OMAP3_MUXENTRY(UART1_TX, 148,
 		"uart1_tx", "ssi1_dat_tx", NULL, NULL,

arch/arm/mach-omap2/omap-smp.c

 /*
- * OMAP4 SMP source file. It contains platform specific fucntions
+ * OMAP4 SMP source file. It contains platform specific functions
  * needed for the linux smp kernel.
  *
  * Copyright (C) 2009 Texas Instruments, Inc.

arch/arm/mach-omap2/omap_device.c

@@ -158,7 +158,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev)
 	}
 
 	od = omap_device_alloc(pdev, hwmods, oh_cnt);
-	if (!od) {
+	if (IS_ERR(od)) {
 		dev_err(&pdev->dev, "Cannot allocate omap_device for :%s\n",
 			oh_name);
 		ret = PTR_ERR(od);

arch/arm/mach-sa1100/collie.c

@@ -289,7 +289,7 @@ static void collie_flash_exit(void)
 }
 
 static struct flash_platform_data collie_flash_data = {
-	.map_name	= "cfi_probe",
+	.map_name	= "jedec_probe",
 	.init		= collie_flash_init,
 	.set_vpp	= collie_set_vpp,
 	.exit		= collie_flash_exit,

arch/arm/mach-shmobile/clock-r8a73a4.c

@@ -555,7 +555,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pll2h",			&pll2h_clk),
 
 	/* CPU clock */
-	CLKDEV_DEV_ID("cpufreq-cpu0",		&z_clk),
+	CLKDEV_DEV_ID("cpu0",			&z_clk),
 
 	/* DIV6 */
 	CLKDEV_CON_ID("zb",			&div6_clks[DIV6_ZB]),

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -616,7 +616,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("smp_twd", &twd_clk), /* smp_twd */
 
 	/* DIV4 clocks */
-	CLKDEV_DEV_ID("cpufreq-cpu0", &div4_clks[DIV4_Z]),
+	CLKDEV_DEV_ID("cpu0", &div4_clks[DIV4_Z]),
 
 	/* DIV6 clocks */
 	CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]),

arch/arm/mach-u300/Kconfig

-menu "ST-Ericsson AB U300/U335 Platform"
-
-comment "ST-Ericsson Mobile Platform Products"
-
 config ARCH_U300
 	bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
 	depends on MMU
@@ -25,7 +21,9 @@ config ARCH_U300
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
-comment "ST-Ericsson U300/U335 Feature Selections"
+if ARCH_U300
+
+menu "ST-Ericsson AB U300/U335 Platform"
 
 config MACH_U300
 	depends on ARCH_U300
@@ -53,3 +51,5 @@ config MACH_U300_SPIDUMMY
 		SPI framework and ARM PL022 support.
 
 endmenu
+
+endif

arch/arm/mach-ux500/cache-l2x0.c

@@ -69,6 +69,7 @@ static int __init ux500_l2x0_init(void)
 	 * some SMI service available.
 	 */
 	outer_cache.disable = NULL;
+	outer_cache.set_debug = NULL;
 
 	return 0;
 }

arch/arm64/include/asm/hwcap.h

@@ -43,6 +43,6 @@
 				 COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
 				 COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV)
 
-extern unsigned int elf_hwcap;
+extern unsigned long elf_hwcap;
 #endif
 #endif

arch/arm64/kernel/process.c

@@ -143,15 +143,26 @@ void machine_restart(char *cmd)
 
 void __show_regs(struct pt_regs *regs)
 {
-	int i;
+	int i, top_reg;
+	u64 lr, sp;
+
+	if (compat_user_mode(regs)) {
+		lr = regs->compat_lr;
+		sp = regs->compat_sp;
+		top_reg = 12;
+	} else {
+		lr = regs->regs[30];
+		sp = regs->sp;
+		top_reg = 29;
+	}
 
 	show_regs_print_info(KERN_DEFAULT);
 	print_symbol("PC is at %s\n", instruction_pointer(regs));
-	print_symbol("LR is at %s\n", regs->regs[30]);
+	print_symbol("LR is at %s\n", lr);
 	printk("pc : [<%016llx>] lr : [<%016llx>] pstate: %08llx\n",
-	       regs->pc, regs->regs[30], regs->pstate);
-	printk("sp : %016llx\n", regs->sp);
-	for (i = 29; i >= 0; i--) {
+	       regs->pc, lr, regs->pstate);
+	printk("sp : %016llx\n", sp);
+	for (i = top_reg; i >= 0; i--) {
 		printk("x%-2d: %016llx ", i, regs->regs[i]);
 		if (i % 2 == 0)
 			printk("\n");

arch/arm64/kernel/setup.c

@@ -57,7 +57,7 @@
 unsigned int processor_id;
 EXPORT_SYMBOL(processor_id);
 
-unsigned int elf_hwcap __read_mostly;
+unsigned long elf_hwcap __read_mostly;
 EXPORT_SYMBOL_GPL(elf_hwcap);
 
 static const char *cpu_name;

arch/arm64/mm/fault.c

@@ -130,7 +130,7 @@ static void __do_user_fault(struct task_struct *tsk, unsigned long addr,
 	force_sig_info(sig, &si, tsk);
 }
 
-void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs)
+static void do_bad_area(unsigned long addr, unsigned int esr, struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->active_mm;

arch/mips/Makefile

@@ -288,9 +288,6 @@ endif
 vmlinux.32: vmlinux
 	$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 
-
-#obj-$(CONFIG_KPROBES)		+= kprobes.o
-
 #
 # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
 # ELF files from 32-bit files by conversion.

arch/mips/alchemy/common/usb.c

@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
+#include <asm/cpu.h>
 #include <asm/mach-au1x00/au1000.h>
 
 /* control register offsets */
@@ -358,7 +359,7 @@ static inline int au1200_coherency_bug(void)
 {
 #if defined(CONFIG_DMA_COHERENT)
 	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
+	if (!(read_c0_prid() & PRID_REV_MASK)) {
 		printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
 		printk(KERN_INFO "Au1200 USB: update your board or re-configure"
 				 " the kernel\n");

arch/mips/bcm63xx/cpu.c

@@ -306,14 +306,14 @@ void __init bcm63xx_cpu_init(void)
 
 	switch (c->cputype) {
 	case CPU_BMIPS3300:
-		if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT)
+		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
 			__cpu_name[cpu] = "Broadcom BCM6338";
 		/* fall-through */
 	case CPU_BMIPS32:
 		chipid_reg = BCM_6345_PERF_BASE;
 		break;
 	case CPU_BMIPS4350:
-		switch ((read_c0_prid() & 0xff)) {
+		switch ((read_c0_prid() & PRID_REV_MASK)) {
 		case 0x04:
 			chipid_reg = BCM_3368_PERF_BASE;
 			break;

arch/mips/boot/dts/include/dt-bindings

-../../../../../include/dt-bindings
+../../../../../include/dt-bindings
\ No newline at end of file

arch/mips/cavium-octeon/csrc-octeon.c

@@ -12,6 +12,7 @@
 #include <linux/smp.h>
 
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 #include <asm/time.h>
 
 #include <asm/octeon/octeon.h>

arch/mips/dec/prom/init.c

@@ -13,6 +13,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/processor.h>
 
 #include <asm/dec/prom.h>

arch/mips/include/asm/cpu-features.h

@@ -13,12 +13,6 @@
 #include <asm/cpu-info.h>
 #include <cpu-feature-overrides.h>
 
-#ifndef current_cpu_type
-#define current_cpu_type()	current_cpu_data.cputype
-#endif
-
-#define boot_cpu_type()		cpu_data[0].cputype
-
 /*
  * SMP assumption: Options of CPU 0 are a superset of all processors.
  * This is true for all known MIPS systems.

arch/mips/include/asm/cpu-info.h

@@ -84,6 +84,7 @@ struct cpuinfo_mips {
 extern struct cpuinfo_mips cpu_data[];
 #define current_cpu_data cpu_data[smp_processor_id()]
 #define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+#define boot_cpu_data cpu_data[0]
 
 extern void cpu_probe(void);
 extern void cpu_report(void);

arch/mips/include/asm/cpu-type.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_TYPE_H
+#define __ASM_CPU_TYPE_H
+
+#include <linux/smp.h>
+#include <linux/compiler.h>
+
+static inline int __pure __get_cpu_type(const int cpu_type)
+{
+	switch (cpu_type) {
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \
+    defined(CONFIG_SYS_HAS_CPU_LOONGSON2F)
+	case CPU_LOONGSON2:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
+	case CPU_LOONGSON1:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
+	case CPU_4KC:
+	case CPU_ALCHEMY:
+	case CPU_BMIPS3300:
+	case CPU_BMIPS4350:
+	case CPU_PR4450:
+	case CPU_BMIPS32:
+	case CPU_JZRISC:
+#endif
+
+#if defined(CONFIG_SYS_HAS_CPU_MIPS32_R1) || \
+    defined(CONFIG_SYS_HAS_CPU_MIPS32_R2)
+	case CPU_4KEC:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R2
+	case CPU_4KSC:
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_1004K:
+	case CPU_74K:
+	case CPU_M14KC:
+	case CPU_M14KEC:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R1
+	case CPU_5KC:
+	case CPU_5KE:
+	case CPU_20KC:
+	case CPU_25KF:
+	case CPU_SB1:
+	case CPU_SB1A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R2
+	/*
+	 * All MIPS64 R2 processors have their own special symbols.  That is,
+	 * there currently is no pure R2 core
+	 */
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R3000
+	case CPU_R2000:
+	case CPU_R3000:
+	case CPU_R3000A:
+	case CPU_R3041:
+	case CPU_R3051:
+	case CPU_R3052:
+	case CPU_R3081:
+	case CPU_R3081E:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_TX39XX
+	case CPU_TX3912:
+	case CPU_TX3922:
+	case CPU_TX3927:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_VR41XX
+	case CPU_VR41XX:
+	case CPU_VR4111:
+	case CPU_VR4121:
+	case CPU_VR4122:
+	case CPU_VR4131:
+	case CPU_VR4133:
+	case CPU_VR4181:
+	case CPU_VR4181A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R4300
+	case CPU_R4300:
+	case CPU_R4310:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R4X00
+	case CPU_R4000PC:
+	case CPU_R4000SC:
+	case CPU_R4000MC:
+	case CPU_R4200:
+	case CPU_R4400PC:
+	case CPU_R4400SC:
+	case CPU_R4400MC:
+	case CPU_R4600:
+	case CPU_R4700:
+	case CPU_R4640:
+	case CPU_R4650:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_TX49XX
+	case CPU_TX49XX:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5000
+	case CPU_R5000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5432
+	case CPU_R5432:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5500
+	case CPU_R5500:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R6000
+	case CPU_R6000:
+	case CPU_R6000A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_NEVADA
+	case CPU_NEVADA:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R8000
+	case CPU_R8000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R10000
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_R14000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_RM7000
+	case CPU_RM7000:
+	case CPU_SR71000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_RM9000
+	case CPU_RM9000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_SB1
+	case CPU_SB1:
+	case CPU_SB1A:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_BMIPS4380
+	case CPU_BMIPS4380:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_BMIPS5000
+	case CPU_BMIPS5000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_XLP
+	case CPU_XLP:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_XLR
+	case CPU_XLR:
+#endif
+		break;
+	default:
+		unreachable();
+	}
+
+	return cpu_type;
+}
+
+static inline int __pure current_cpu_type(void)
+{
+	const int cpu_type = current_cpu_data.cputype;
+
+	return __get_cpu_type(cpu_type);
+}
+
+static inline int __pure boot_cpu_type(void)
+{
+	const int cpu_type = cpu_data[0].cputype;
+
+	return __get_cpu_type(cpu_type);
+}
+
+#endif /* __ASM_CPU_TYPE_H */

arch/mips/include/asm/cpu.h

@@ -3,15 +3,14 @@
  *	  various MIPS cpu types.
  *
  * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- * Copyright (C) 2004  Maciej W. Rozycki
+ * Copyright (C) 2004, 2013  Maciej W. Rozycki
  */
 #ifndef _ASM_CPU_H
 #define _ASM_CPU_H
 
-/* Assigned Company values for bits 23:16 of the PRId Register
-   (CP0 register 15, select 0).	 As of the MIPS32 and MIPS64 specs from
-   MTI, the PRId register is defined in this (backwards compatible)
-   way:
+/*
+   As of the MIPS32 and MIPS64 specs from MTI, the PRId register (CP0
+   register 15, select 0) is defined in this (backwards compatible) way:
 
   +----------------+----------------+----------------+----------------+
   | Company Options| Company ID	    | Processor ID   | Revision	      |
@@ -23,6 +22,14 @@
    spec.
 */
 
+#define PRID_OPT_MASK		0xff000000
+
+/*
+ * Assigned Company values for bits 23:16 of the PRId register.
+ */
+
+#define PRID_COMP_MASK		0xff0000
+
 #define PRID_COMP_LEGACY	0x000000
 #define PRID_COMP_MIPS		0x010000
 #define PRID_COMP_BROADCOM	0x020000
@@ -38,10 +45,17 @@
 #define PRID_COMP_INGENIC	0xd00000
 
 /*
- * Assigned values for the product ID register.	 In order to detect a
- * certain CPU type exactly eventually additional registers may need to
- * be examined.	 These are valid when 23:16 == PRID_COMP_LEGACY
+ * Assigned Processor ID (implementation) values for bits 15:8 of the PRId
+ * register.  In order to detect a certain CPU type exactly eventually
+ * additional registers may need to be examined.
  */
+
+#define PRID_IMP_MASK		0xff00
+
+/*
+ * These are valid when 23:16 == PRID_COMP_LEGACY
+ */
+
 #define PRID_IMP_R2000		0x0100
 #define PRID_IMP_AU1_REV1	0x0100
 #define PRID_IMP_AU1_REV2	0x0200
@@ -182,11 +196,15 @@
 #define PRID_IMP_NETLOGIC_XLP2XX	0x1200
 
 /*
- * Definitions for 7:0 on legacy processors
+ * Particular Revision values for bits 7:0 of the PRId register.
  */
 
 #define PRID_REV_MASK		0x00ff
 
+/*
+ * Definitions for 7:0 on legacy processors
+ */
+
 #define PRID_REV_TX4927		0x0022
 #define PRID_REV_TX4937		0x0030
 #define PRID_REV_R4400		0x0040
@@ -227,6 +245,8 @@
  *  31				   16 15	     8 7	      0
  */
 
+#define FPIR_IMP_MASK		0xff00
+
 #define FPIR_IMP_NONE		0x0000
 
 enum cpu_type_enum {

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -43,6 +43,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
+#include <asm/cpu.h>
+
 /* cpu pipeline flush */
 void static inline au_sync(void)
 {
@@ -140,7 +142,7 @@ static inline int au1xxx_cpu_needs_config_od(void)
 
 static inline int alchemy_get_cputype(void)
 {
-	switch (read_c0_prid() & 0xffff0000) {
+	switch (read_c0_prid() & (PRID_OPT_MASK | PRID_COMP_MASK)) {
 	case 0x00030000:
 		return ALCHEMY_CPU_AU1000;
 		break;

arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h

@@ -8,6 +8,8 @@
 #ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP22 with a variety of processors so we can't use defaults for everything.
  */

arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h

@@ -8,6 +8,8 @@
 #ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP27 only comes with R10000 family processors all using the same config
  */

arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h

@@ -9,6 +9,8 @@
 #ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP28 only comes with R10000 family processors all using the same config
  */

arch/mips/include/asm/mipsregs.h

@@ -603,6 +603,13 @@
 #define MIPS_CONF4_MMUEXTDEF	(_ULCAST_(3) << 14)
 #define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
 
+#define MIPS_CONF5_NF		(_ULCAST_(1) << 0)
+#define MIPS_CONF5_UFR		(_ULCAST_(1) << 2)
+#define MIPS_CONF5_MSAEN	(_ULCAST_(1) << 27)
+#define MIPS_CONF5_EVA		(_ULCAST_(1) << 28)
+#define MIPS_CONF5_CV		(_ULCAST_(1) << 29)
+#define MIPS_CONF5_K		(_ULCAST_(1) << 30)
+
 #define MIPS_CONF6_SYND		(_ULCAST_(1) << 13)
 
 #define MIPS_CONF7_WII		(_ULCAST_(1) << 31)

arch/mips/include/asm/pci.h

@@ -83,6 +83,18 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	enum pci_mmap_state mmap_state, int write_combine);
 
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+
+static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
+		const struct resource *rsrc, resource_size_t *start,
+		resource_size_t *end)
+{
+	phys_t size = resource_size(rsrc);
+
+	*start = fixup_bigphys_addr(rsrc->start, size);
+	*end = rsrc->start + size;
+}
+
 /*
  * Dynamic DMA mapping stuff.
  * MIPS has everything mapped statically.

arch/mips/include/asm/timex.h

@@ -10,7 +10,9 @@
 
 #ifdef __KERNEL__
 
+#include <asm/cpu-features.h>
 #include <asm/mipsregs.h>
+#include <asm/cpu-type.h>
 
 /*
  * This is the clock rate of the i8253 PIT.  A MIPS system may not have
@@ -33,9 +35,38 @@
 
 typedef unsigned int cycles_t;
 
+/*
+ * On R4000/R4400 before version 5.0 an erratum exists such that if the
+ * cycle counter is read in the exact moment that it is matching the
+ * compare register, no interrupt will be generated.
+ *
+ * There is a suggested workaround and also the erratum can't strike if
+ * the compare interrupt isn't being used as the clock source device.
+ * However for now the implementaton of this function doesn't get these
+ * fine details right.
+ */
 static inline cycles_t get_cycles(void)
 {
-	return 0;
+	switch (boot_cpu_type()) {
+	case CPU_R4400PC:
+	case CPU_R4400SC:
+	case CPU_R4400MC:
+		if ((read_c0_prid() & 0xff) >= 0x0050)
+			return read_c0_count();
+		break;
+
+        case CPU_R4000PC:
+        case CPU_R4000SC:
+        case CPU_R4000MC:
+		break;
+
+	default:
+		if (cpu_has_counter)
+			return read_c0_count();
+		break;
+	}
+
+	return 0;	/* no usable counter */
 }
 
 #endif /* __KERNEL__ */

arch/mips/include/asm/vga.h

@@ -6,6 +6,7 @@
 #ifndef _ASM_VGA_H
 #define _ASM_VGA_H
 
+#include <asm/addrspace.h>
 #include <asm/byteorder.h>
 
 /*
@@ -13,7 +14,7 @@
  *	access the videoram directly without any black magic.
  */
 
-#define VGA_MAP_MEM(x, s)	(0xb0000000L + (unsigned long)(x))
+#define VGA_MAP_MEM(x, s)	CKSEG1ADDR(0x10000000L + (unsigned long)(x))
 
 #define vga_readb(x)	(*(x))
 #define vga_writeb(x, y)	(*(y) = (x))

arch/mips/kernel/cpu-probe.c

@@ -20,6 +20,7 @@
 
 #include <asm/bugs.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/watch.h>
@@ -55,7 +56,7 @@ static inline void check_errata(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_34K:
 		/*
 		 * Erratum "RPS May Cause Incorrect Instruction Execution"
@@ -122,7 +123,7 @@ static inline unsigned long cpu_get_fpu_id(void)
  */
 static inline int __cpu_has_fpu(void)
 {
-	return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
+	return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE);
 }
 
 static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
@@ -290,6 +291,17 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
 	return config4 & MIPS_CONF_M;
 }
 
+static inline unsigned int decode_config5(struct cpuinfo_mips *c)
+{
+	unsigned int config5;
+
+	config5 = read_c0_config5();
+	config5 &= ~MIPS_CONF5_UFR;
+	write_c0_config5(config5);
+
+	return config5 & MIPS_CONF_M;
+}
+
 static void decode_configs(struct cpuinfo_mips *c)
 {
 	int ok;
@@ -310,6 +322,8 @@ static void decode_configs(struct cpuinfo_mips *c)
 		ok = decode_config3(c);
 	if (ok)
 		ok = decode_config4(c);
+	if (ok)
+		ok = decode_config5(c);
 
 	mips_probe_watch_registers(c);
 
@@ -322,7 +336,7 @@ static void decode_configs(struct cpuinfo_mips *c)
 
 static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 {
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_R2000:
 		c->cputype = CPU_R2000;
 		__cpu_name[cpu] = "R2000";
@@ -333,7 +347,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->tlbsize = 64;
 		break;
 	case PRID_IMP_R3000:
-		if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
+		if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
 			if (cpu_has_confreg()) {
 				c->cputype = CPU_R3081E;
 				__cpu_name[cpu] = "R3081";
@@ -353,7 +367,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		break;
 	case PRID_IMP_R4000:
 		if (read_c0_config() & CONF_SC) {
-			if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
+			if ((c->processor_id & PRID_REV_MASK) >=
+			    PRID_REV_R4400) {
 				c->cputype = CPU_R4400PC;
 				__cpu_name[cpu] = "R4400PC";
 			} else {
@@ -361,7 +376,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 				__cpu_name[cpu] = "R4000PC";
 			}
 		} else {
-			if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
+			if ((c->processor_id & PRID_REV_MASK) >=
+			    PRID_REV_R4400) {
 				c->cputype = CPU_R4400SC;
 				__cpu_name[cpu] = "R4400SC";
 			} else {
@@ -454,7 +470,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			__cpu_name[cpu] = "TX3927";
 			c->tlbsize = 64;
 		} else {
-			switch (c->processor_id & 0xff) {
+			switch (c->processor_id & PRID_REV_MASK) {
 			case PRID_REV_TX3912:
 				c->cputype = CPU_TX3912;
 				__cpu_name[cpu] = "TX3912";
@@ -640,7 +656,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_4KC:
 		c->cputype = CPU_4KC;
 		__cpu_name[cpu] = "MIPS 4Kc";
@@ -711,7 +727,7 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_AU1_REV1:
 	case PRID_IMP_AU1_REV2:
 		c->cputype = CPU_ALCHEMY;
@@ -730,7 +746,7 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 			break;
 		case 4:
 			__cpu_name[cpu] = "Au1200";
-			if ((c->processor_id & 0xff) == 2)
+			if ((c->processor_id & PRID_REV_MASK) == 2)
 				__cpu_name[cpu] = "Au1250";
 			break;
 		case 5:
@@ -748,12 +764,12 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
 
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
 		__cpu_name[cpu] = "SiByte SB1";
 		/* FPU in pass1 is known to have issues. */
-		if ((c->processor_id & 0xff) < 0x02)
+		if ((c->processor_id & PRID_REV_MASK) < 0x02)
 			c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 		break;
 	case PRID_IMP_SB1A:
@@ -766,7 +782,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_SR71000:
 		c->cputype = CPU_SR71000;
 		__cpu_name[cpu] = "Sandcraft SR71000";
@@ -779,7 +795,7 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_PR4450:
 		c->cputype = CPU_PR4450;
 		__cpu_name[cpu] = "Philips PR4450";
@@ -791,7 +807,7 @@ static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_BMIPS32_REV4:
 	case PRID_IMP_BMIPS32_REV8:
 		c->cputype = CPU_BMIPS32;
@@ -806,7 +822,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		set_elf_platform(cpu, "bmips3300");
 		break;
 	case PRID_IMP_BMIPS43XX: {
-		int rev = c->processor_id & 0xff;
+		int rev = c->processor_id & PRID_REV_MASK;
 
 		if (rev >= PRID_REV_BMIPS4380_LO &&
 				rev <= PRID_REV_BMIPS4380_HI) {
@@ -832,7 +848,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_CAVIUM_CN38XX:
 	case PRID_IMP_CAVIUM_CN31XX:
 	case PRID_IMP_CAVIUM_CN30XX:
@@ -875,7 +891,7 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 	decode_configs(c);
 	/* JZRISC does not implement the CP0 counter. */
 	c->options &= ~MIPS_CPU_COUNTER;
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_JZRISC:
 		c->cputype = CPU_JZRISC;
 		__cpu_name[cpu] = "Ingenic JZRISC";
@@ -890,7 +906,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 {
 	decode_configs(c);
 
-	if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) {
+	if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) {
 		c->cputype = CPU_ALCHEMY;
 		__cpu_name[cpu] = "Au1300";
 		/* following stuff is not for Alchemy */
@@ -905,7 +921,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 			MIPS_CPU_EJTAG	 |
 			MIPS_CPU_LLSC);
 
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_NETLOGIC_XLP2XX:
 		c->cputype = CPU_XLP;
 		__cpu_name[cpu] = "Broadcom XLPII";
@@ -984,7 +1000,7 @@ void cpu_probe(void)
 	c->cputype	= CPU_UNKNOWN;
 
 	c->processor_id = read_c0_prid();
-	switch (c->processor_id & 0xff0000) {
+	switch (c->processor_id & PRID_COMP_MASK) {
 	case PRID_COMP_LEGACY:
 		cpu_probe_legacy(c, cpu);
 		break;

arch/mips/kernel/idle.c

@@ -18,6 +18,7 @@
 #include <linux/sched.h>
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 #include <asm/idle.h>
 #include <asm/mipsregs.h>
 
@@ -136,7 +137,7 @@ void __init check_wait(void)
 		return;
 	}
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R3081:
 	case CPU_R3081E:
 		cpu_wait = r3081_wait;

arch/mips/kernel/time.c

@@ -24,6 +24,7 @@
 #include <linux/export.h>
 
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/div64.h>
 #include <asm/smtc_ipi.h>
 #include <asm/time.h>

arch/mips/kernel/traps.c

@@ -39,6 +39,7 @@
 #include <asm/break.h>
 #include <asm/cop2.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
@@ -622,7 +623,7 @@ static int simulate_rdhwr(struct pt_regs *regs, int rd, int rt)
 		regs->regs[rt] = read_c0_count();
 		return 0;
 	case 3:		/* Count register resolution */
-		switch (current_cpu_data.cputype) {
+		switch (current_cpu_type()) {
 		case CPU_20KC:
 		case CPU_25KF:
 			regs->regs[rt] = 1;

arch/mips/mm/c-octeon.c

@@ -19,6 +19,7 @@
 #include <asm/bootinfo.h>
 #include <asm/cacheops.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/r4kcache.h>
@@ -186,9 +187,10 @@ static void probe_octeon(void)
 	unsigned long dcache_size;
 	unsigned int config1;
 	struct cpuinfo_mips *c = &current_cpu_data;
+	int cputype = current_cpu_type();
 
 	config1 = read_c0_config1();
-	switch (c->cputype) {
+	switch (cputype) {
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 		c->icache.linesz = 2 << ((config1 >> 19) & 7);
@@ -199,7 +201,7 @@ static void probe_octeon(void)
 			c->icache.sets * c->icache.ways * c->icache.linesz;
 		c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
 		c->dcache.linesz = 128;
-		if (c->cputype == CPU_CAVIUM_OCTEON_PLUS)
+		if (cputype == CPU_CAVIUM_OCTEON_PLUS)
 			c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
 		else
 			c->dcache.sets = 1; /* CN3XXX has one Dcache set */

arch/mips/mm/c-r4k.c

@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <linux/kernel.h>
 #include <linux/linkage.h>
+#include <linux/preempt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -24,6 +25,7 @@
 #include <asm/cacheops.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -601,6 +603,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
@@ -621,6 +624,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_wback_inv(addr, size);
 	__sync();
@@ -631,6 +635,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
@@ -655,6 +660,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_inv_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_inv(addr, size);
 	__sync();
@@ -780,20 +786,30 @@ static inline void rm7k_erratum31(void)
 
 static inline void alias_74k_erratum(struct cpuinfo_mips *c)
 {
+	unsigned int imp = c->processor_id & PRID_IMP_MASK;
+	unsigned int rev = c->processor_id & PRID_REV_MASK;
+
 	/*
 	 * Early versions of the 74K do not update the cache tags on a
 	 * vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG
 	 * aliases. In this case it is better to treat the cache as always
 	 * having aliases.
 	 */
-	if ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(2, 4, 0))
-		c->dcache.flags |= MIPS_CACHE_VTAG;
-	if ((c->processor_id & 0xff) == PRID_REV_ENCODE_332(2, 4, 0))
-		write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
-	if (((c->processor_id & 0xff00) == PRID_IMP_1074K) &&
-	    ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(1, 1, 0))) {
-		c->dcache.flags |= MIPS_CACHE_VTAG;
-		write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+	switch (imp) {
+	case PRID_IMP_74K:
+		if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
+			c->dcache.flags |= MIPS_CACHE_VTAG;
+		if (rev == PRID_REV_ENCODE_332(2, 4, 0))
+			write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+		break;
+	case PRID_IMP_1074K:
+		if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
+			c->dcache.flags |= MIPS_CACHE_VTAG;
+			write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
+		}
+		break;
+	default:
+		BUG();
 	}
 }
 
@@ -809,7 +825,7 @@ static void probe_pcache(void)
 	unsigned long config1;
 	unsigned int lsize;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R4600:			/* QED style two way caches? */
 	case CPU_R4700:
 	case CPU_R5000:
@@ -1025,7 +1041,8 @@ static void probe_pcache(void)
 	 * presumably no vendor is shipping his hardware in the "bad"
 	 * configuration.
 	 */
-	if ((prid & 0xff00) == PRID_IMP_R4000 && (prid & 0xff) < 0x40 &&
+	if ((prid & PRID_IMP_MASK) == PRID_IMP_R4000 &&
+	    (prid & PRID_REV_MASK) < PRID_REV_R4400 &&
 	    !(config & CONF_SC) && c->icache.linesz != 16 &&
 	    PAGE_SIZE <= 0x8000)
 		panic("Improper R4000SC processor configuration detected");
@@ -1045,7 +1062,7 @@ static void probe_pcache(void)
 	 * normally they'd suffer from aliases but magic in the hardware deals
 	 * with that for us so we don't need to take care ourselves.
 	 */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_20KC:
 	case CPU_25KF:
 	case CPU_SB1:
@@ -1065,7 +1082,7 @@ static void probe_pcache(void)
 	case CPU_34K:
 	case CPU_74K:
 	case CPU_1004K:
-		if (c->cputype == CPU_74K)
+		if (current_cpu_type() == CPU_74K)
 			alias_74k_erratum(c);
 		if ((read_c0_config7() & (1 << 16))) {
 			/* effectively physically indexed dcache,
@@ -1078,7 +1095,7 @@ static void probe_pcache(void)
 			c->dcache.flags |= MIPS_CACHE_ALIASES;
 	}
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_20KC:
 		/*
 		 * Some older 20Kc chips doesn't have the 'VI' bit in
@@ -1207,7 +1224,7 @@ static void setup_scache(void)
 	 * processors don't have a S-cache that would be relevant to the
 	 * Linux memory management.
 	 */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R4000SC:
 	case CPU_R4000MC:
 	case CPU_R4400SC:
@@ -1384,9 +1401,8 @@ static void r4k_cache_error_setup(void)
 {
 	extern char __weak except_vec2_generic;
 	extern char __weak except_vec2_sb1;
-	struct cpuinfo_mips *c = &current_cpu_data;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_SB1:
 	case CPU_SB1A:
 		set_uncached_handler(0x100, &except_vec2_sb1, 0x80);

arch/mips/mm/dma-default.c

@@ -18,6 +18,7 @@
 #include <linux/highmem.h>
 
 #include <asm/cache.h>
+#include <asm/cpu-type.h>
 #include <asm/io.h>
 
 #include <dma-coherence.h>

arch/mips/mm/page.c

@@ -18,6 +18,7 @@
 
 #include <asm/bugs.h>
 #include <asm/cacheops.h>
+#include <asm/cpu-type.h>
 #include <asm/inst.h>
 #include <asm/io.h>
 #include <asm/page.h>

arch/mips/mm/sc-mips.c

@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 
+#include <asm/cpu-type.h>
 #include <asm/mipsregs.h>
 #include <asm/bcache.h>
 #include <asm/cacheops.h>
@@ -71,7 +72,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 	unsigned int tmp;
 
 	/* Check the bypass bit (L2B) */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_34K:
 	case CPU_74K:
 	case CPU_1004K:

arch/mips/mm/tlb-r4k.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>
 
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/bootinfo.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>

arch/mips/mm/tlbex.c

@@ -30,6 +30,7 @@
 #include <linux/cache.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cpu-type.h>
 #include <asm/pgtable.h>
 #include <asm/war.h>
 #include <asm/uasm.h>

arch/mips/mti-malta/malta-time.c

@@ -27,6 +27,7 @@
 #include <linux/timex.h>
 #include <linux/mc146818rtc.h>
 
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/hardirq.h>
@@ -76,7 +77,7 @@ static void __init estimate_frequencies(void)
 #endif
 
 #if defined (CONFIG_KVM_GUEST) && defined (CONFIG_KVM_HOST_FREQ)
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 
 	/*
 	 * XXXKYMA: hardwire the CPU frequency to Host Freq/4
@@ -169,7 +170,7 @@ unsigned int get_c0_compare_int(void)
 
 void __init plat_time_init(void)
 {
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 	unsigned int freq;
 
 	estimate_frequencies();

arch/mips/mti-sead3/sead3-time.c

@@ -7,6 +7,7 @@
  */
 #include <linux/init.h>
 
+#include <asm/cpu.h>
 #include <asm/setup.h>
 #include <asm/time.h>
 #include <asm/irq.h>
@@ -34,7 +35,7 @@ static void __iomem *status_reg = (void __iomem *)0xbf000410;
  */
 static unsigned int __init estimate_cpu_frequency(void)
 {
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 	unsigned int tick = 0;
 	unsigned int freq;
 	unsigned int orig;

arch/mips/netlogic/xlr/fmn-config.c

@@ -36,6 +36,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/netlogic/xlr/fmn.h>
 #include <asm/netlogic/xlr/xlr.h>
@@ -187,7 +188,7 @@ void xlr_board_info_setup(void)
 	int processor_id, num_core;
 
 	num_core = hweight32(nlm_current_node()->coremask);
-	processor_id = read_c0_prid() & 0xff00;
+	processor_id = read_c0_prid() & PRID_IMP_MASK;
 
 	setup_cpu_fmninfo(cpu, num_core);
 	switch (processor_id) {

arch/mips/oprofile/common.c

@@ -12,6 +12,7 @@
 #include <linux/oprofile.h>
 #include <linux/smp.h>
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 
 #include "op_impl.h"
 

arch/mips/pci/pci-bcm1480.c

@@ -39,6 +39,7 @@
 #include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/tty.h>
+#include <linux/vt.h>
 
 #include <asm/sibyte/bcm1480_regs.h>
 #include <asm/sibyte/bcm1480_scd.h>

arch/mips/sibyte/bcm1480/setup.c

@@ -22,6 +22,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
@@ -119,7 +120,7 @@ void __init bcm1480_setup(void)
 	uint64_t sys_rev;
 	int plldiv;
 
-	sb1_pass = read_c0_prid() & 0xff;
+	sb1_pass = read_c0_prid() & PRID_REV_MASK;
 	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	part_type = G_SYS_PART(sys_rev);

arch/mips/sibyte/sb1250/setup.c

@@ -22,6 +22,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
@@ -182,7 +183,7 @@ void __init sb1250_setup(void)
 	int plldiv;
 	int bad_config = 0;
 
-	sb1_pass = read_c0_prid() & 0xff;
+	sb1_pass = read_c0_prid() & PRID_REV_MASK;
 	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	soc_pass = G_SYS_REVISION(sys_rev);

arch/mips/sni/setup.c

@@ -25,6 +25,7 @@
 #endif
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/sni.h>
@@ -173,7 +174,7 @@ void __init plat_mem_setup(void)
 		system_type = "RM300-Cxx";
 		break;
 	case SNI_BRD_PCI_DESKTOP:
-		switch (read_c0_prid() & 0xff00) {
+		switch (read_c0_prid() & PRID_IMP_MASK) {
 		case PRID_IMP_R4600:
 		case PRID_IMP_R4700:
 			system_type = "RM200-C20";

arch/tile/Kconfig

@@ -361,7 +361,7 @@ config CMDLINE_OVERRIDE
 
 config VMALLOC_RESERVE
 	hex
-	default 0x1000000
+	default 0x2000000
 
 config HARDWALL
 	bool "Hardwall support to allow access to user dynamic network"

arch/tile/gxio/iorpc_mpipe.c

@@ -21,7 +21,7 @@ struct alloc_buffer_stacks_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t *context,
 				   unsigned int count, unsigned int first,
 				   unsigned int flags)
 {
@@ -45,7 +45,7 @@ struct init_buffer_stack_aux_param {
 	unsigned int buffer_size_enum;
 };
 
-int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t *context,
 				     void *mem_va, size_t mem_size,
 				     unsigned int mem_flags, unsigned int stack,
 				     unsigned int buffer_size_enum)
@@ -80,7 +80,7 @@ struct alloc_notif_rings_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t *context,
 				 unsigned int count, unsigned int first,
 				 unsigned int flags)
 {
@@ -102,7 +102,7 @@ struct init_notif_ring_aux_param {
 	unsigned int ring;
 };
 
-int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
+int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t *context, void *mem_va,
 				   size_t mem_size, unsigned int mem_flags,
 				   unsigned int ring)
 {
@@ -133,7 +133,7 @@ struct request_notif_ring_interrupt_param {
 	unsigned int ring;
 };
 
-int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t * context,
+int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t *context,
 					    int inter_x, int inter_y,
 					    int inter_ipi, int inter_event,
 					    unsigned int ring)
@@ -158,7 +158,7 @@ struct enable_notif_ring_interrupt_param {
 	unsigned int ring;
 };
 
-int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t * context,
+int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t *context,
 					   unsigned int ring)
 {
 	struct enable_notif_ring_interrupt_param temp;
@@ -179,7 +179,7 @@ struct alloc_notif_groups_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t *context,
 				  unsigned int count, unsigned int first,
 				  unsigned int flags)
 {
@@ -201,7 +201,7 @@ struct init_notif_group_param {
 	gxio_mpipe_notif_group_bits_t bits;
 };
 
-int gxio_mpipe_init_notif_group(gxio_mpipe_context_t * context,
+int gxio_mpipe_init_notif_group(gxio_mpipe_context_t *context,
 				unsigned int group,
 				gxio_mpipe_notif_group_bits_t bits)
 {
@@ -223,7 +223,7 @@ struct alloc_buckets_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t * context, unsigned int count,
+int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t *context, unsigned int count,
 			     unsigned int first, unsigned int flags)
 {
 	struct alloc_buckets_param temp;
@@ -244,7 +244,7 @@ struct init_bucket_param {
 	MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info;
 };
 
-int gxio_mpipe_init_bucket(gxio_mpipe_context_t * context, unsigned int bucket,
+int gxio_mpipe_init_bucket(gxio_mpipe_context_t *context, unsigned int bucket,
 			   MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info)
 {
 	struct init_bucket_param temp;
@@ -265,7 +265,7 @@ struct alloc_edma_rings_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags)
 {
@@ -288,7 +288,7 @@ struct init_edma_ring_aux_param {
 	unsigned int channel;
 };
 
-int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
+int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t *context, void *mem_va,
 				  size_t mem_size, unsigned int mem_flags,
 				  unsigned int ring, unsigned int channel)
 {
@@ -315,7 +315,7 @@ int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
 EXPORT_SYMBOL(gxio_mpipe_init_edma_ring_aux);
 
 
-int gxio_mpipe_commit_rules(gxio_mpipe_context_t * context, const void *blob,
+int gxio_mpipe_commit_rules(gxio_mpipe_context_t *context, const void *blob,
 			    size_t blob_size)
 {
 	const void *params = blob;
@@ -332,7 +332,7 @@ struct register_client_memory_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_register_client_memory(gxio_mpipe_context_t * context,
+int gxio_mpipe_register_client_memory(gxio_mpipe_context_t *context,
 				      unsigned int iotlb, HV_PTE pte,
 				      unsigned int flags)
 {
@@ -355,7 +355,7 @@ struct link_open_aux_param {
 	unsigned int flags;
 };
 
-int gxio_mpipe_link_open_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_link_open_aux(gxio_mpipe_context_t *context,
 			     _gxio_mpipe_link_name_t name, unsigned int flags)
 {
 	struct link_open_aux_param temp;
@@ -374,7 +374,7 @@ struct link_close_aux_param {
 	int mac;
 };
 
-int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac)
+int gxio_mpipe_link_close_aux(gxio_mpipe_context_t *context, int mac)
 {
 	struct link_close_aux_param temp;
 	struct link_close_aux_param *params = &temp;
@@ -393,7 +393,7 @@ struct link_set_attr_aux_param {
 	int64_t val;
 };
 
-int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t * context, int mac,
+int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t *context, int mac,
 				 uint32_t attr, int64_t val)
 {
 	struct link_set_attr_aux_param temp;
@@ -415,8 +415,8 @@ struct get_timestamp_aux_param {
 	uint64_t cycles;
 };
 
-int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t * context, uint64_t * sec,
-				 uint64_t * nsec, uint64_t * cycles)
+int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t *context, uint64_t *sec,
+				 uint64_t *nsec, uint64_t *cycles)
 {
 	int __result;
 	struct get_timestamp_aux_param temp;
@@ -440,7 +440,7 @@ struct set_timestamp_aux_param {
 	uint64_t cycles;
 };
 
-int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t * context, uint64_t sec,
+int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t *context, uint64_t sec,
 				 uint64_t nsec, uint64_t cycles)
 {
 	struct set_timestamp_aux_param temp;
@@ -460,8 +460,7 @@ struct adjust_timestamp_aux_param {
 	int64_t nsec;
 };
 
-int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context,
-				    int64_t nsec)
+int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t *context, int64_t nsec)
 {
 	struct adjust_timestamp_aux_param temp;
 	struct adjust_timestamp_aux_param *params = &temp;
@@ -475,25 +474,6 @@ int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context,
 
 EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_aux);
 
-struct adjust_timestamp_freq_param {
-	int32_t ppb;
-};
-
-int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t * context,
-				     int32_t ppb)
-{
-	struct adjust_timestamp_freq_param temp;
-	struct adjust_timestamp_freq_param *params = &temp;
-
-	params->ppb = ppb;
-
-	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
-			     sizeof(*params),
-			     GXIO_MPIPE_OP_ADJUST_TIMESTAMP_FREQ);
-}
-
-EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_freq);
-
 struct config_edma_ring_blks_param {
 	unsigned int ering;
 	unsigned int max_blks;
@@ -501,7 +481,7 @@ struct config_edma_ring_blks_param {
 	unsigned int db;
 };
 
-int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t * context,
+int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t *context,
 				     unsigned int ering, unsigned int max_blks,
 				     unsigned int min_snf_blks, unsigned int db)
 {
@@ -520,11 +500,29 @@ int gxio_mpipe_config_edma_ring_blks(gxio_mpipe_context_t * context,
 
 EXPORT_SYMBOL(gxio_mpipe_config_edma_ring_blks);
 
+struct adjust_timestamp_freq_param {
+	int32_t ppb;
+};
+
+int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t *context, int32_t ppb)
+{
+	struct adjust_timestamp_freq_param temp;
+	struct adjust_timestamp_freq_param *params = &temp;
+
+	params->ppb = ppb;
+
+	return hv_dev_pwrite(context->fd, 0, (HV_VirtAddr) params,
+			     sizeof(*params),
+			     GXIO_MPIPE_OP_ADJUST_TIMESTAMP_FREQ);
+}
+
+EXPORT_SYMBOL(gxio_mpipe_adjust_timestamp_freq);
+
 struct arm_pollfd_param {
 	union iorpc_pollfd pollfd;
 };
 
-int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie)
+int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie)
 {
 	struct arm_pollfd_param temp;
 	struct arm_pollfd_param *params = &temp;
@@ -541,7 +539,7 @@ struct close_pollfd_param {
 	union iorpc_pollfd pollfd;
 };
 
-int gxio_mpipe_close_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie)
+int gxio_mpipe_close_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie)
 {
 	struct close_pollfd_param temp;
 	struct close_pollfd_param *params = &temp;
@@ -558,7 +556,7 @@ struct get_mmio_base_param {
 	HV_PTE base;
 };
 
-int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t * context, HV_PTE *base)
+int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t *context, HV_PTE *base)
 {
 	int __result;
 	struct get_mmio_base_param temp;
@@ -579,7 +577,7 @@ struct check_mmio_offset_param {
 	unsigned long size;
 };
 
-int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t * context,
+int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t *context,
 				 unsigned long offset, unsigned long size)
 {
 	struct check_mmio_offset_param temp;

arch/tile/gxio/iorpc_mpipe_info.c

@@ -15,12 +15,11 @@
 /* This file is machine-generated; DO NOT EDIT! */
 #include "gxio/iorpc_mpipe_info.h"
 
-
 struct instance_aux_param {
 	_gxio_mpipe_link_name_t name;
 };
 
-int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t *context,
 				 _gxio_mpipe_link_name_t name)
 {
 	struct instance_aux_param temp;
@@ -39,10 +38,10 @@ struct enumerate_aux_param {
 	_gxio_mpipe_link_mac_t mac;
 };
 
-int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t *context,
 				  unsigned int idx,
-				  _gxio_mpipe_link_name_t * name,
-				  _gxio_mpipe_link_mac_t * mac)
+				  _gxio_mpipe_link_name_t *name,
+				  _gxio_mpipe_link_mac_t *mac)
 {
 	int __result;
 	struct enumerate_aux_param temp;
@@ -50,7 +49,7 @@ int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
 
 	__result =
 	    hv_dev_pread(context->fd, 0, (HV_VirtAddr) params, sizeof(*params),
-			 (((uint64_t) idx << 32) |
+			 (((uint64_t)idx << 32) |
 			  GXIO_MPIPE_INFO_OP_ENUMERATE_AUX));
 	*name = params->name;
 	*mac = params->mac;
@@ -64,7 +63,7 @@ struct get_mmio_base_param {
 	HV_PTE base;
 };
 
-int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t *context,
 				  HV_PTE *base)
 {
 	int __result;
@@ -86,7 +85,7 @@ struct check_mmio_offset_param {
 	unsigned long size;
 };
 
-int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t *context,
 				      unsigned long offset, unsigned long size)
 {
 	struct check_mmio_offset_param temp;

arch/tile/gxio/iorpc_trio.c

@@ -21,7 +21,7 @@ struct alloc_asids_param {
 	unsigned int flags;
 };
 
-int gxio_trio_alloc_asids(gxio_trio_context_t * context, unsigned int count,
+int gxio_trio_alloc_asids(gxio_trio_context_t *context, unsigned int count,
 			  unsigned int first, unsigned int flags)
 {
 	struct alloc_asids_param temp;
@@ -44,7 +44,7 @@ struct alloc_memory_maps_param {
 	unsigned int flags;
 };
 
-int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context,
+int gxio_trio_alloc_memory_maps(gxio_trio_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags)
 {
@@ -67,7 +67,7 @@ struct alloc_scatter_queues_param {
 	unsigned int flags;
 };
 
-int gxio_trio_alloc_scatter_queues(gxio_trio_context_t * context,
+int gxio_trio_alloc_scatter_queues(gxio_trio_context_t *context,
 				   unsigned int count, unsigned int first,
 				   unsigned int flags)
 {
@@ -91,7 +91,7 @@ struct alloc_pio_regions_param {
 	unsigned int flags;
 };
 
-int gxio_trio_alloc_pio_regions(gxio_trio_context_t * context,
+int gxio_trio_alloc_pio_regions(gxio_trio_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags)
 {
@@ -115,7 +115,7 @@ struct init_pio_region_aux_param {
 	unsigned int flags;
 };
 
-int gxio_trio_init_pio_region_aux(gxio_trio_context_t * context,
+int gxio_trio_init_pio_region_aux(gxio_trio_context_t *context,
 				  unsigned int pio_region, unsigned int mac,
 				  uint32_t bus_address_hi, unsigned int flags)
 {
@@ -145,7 +145,7 @@ struct init_memory_map_mmu_aux_param {
 	unsigned int order_mode;
 };
 
-int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t * context,
+int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t *context,
 				      unsigned int map, unsigned long va,
 				      uint64_t size, unsigned int asid,
 				      unsigned int mac, uint64_t bus_address,
@@ -175,7 +175,7 @@ struct get_port_property_param {
 	struct pcie_trio_ports_property trio_ports;
 };
 
-int gxio_trio_get_port_property(gxio_trio_context_t * context,
+int gxio_trio_get_port_property(gxio_trio_context_t *context,
 				struct pcie_trio_ports_property *trio_ports)
 {
 	int __result;
@@ -198,7 +198,7 @@ struct config_legacy_intr_param {
 	unsigned int intx;
 };
 
-int gxio_trio_config_legacy_intr(gxio_trio_context_t * context, int inter_x,
+int gxio_trio_config_legacy_intr(gxio_trio_context_t *context, int inter_x,
 				 int inter_y, int inter_ipi, int inter_event,
 				 unsigned int mac, unsigned int intx)
 {
@@ -227,7 +227,7 @@ struct config_msi_intr_param {
 	unsigned int asid;
 };
 
-int gxio_trio_config_msi_intr(gxio_trio_context_t * context, int inter_x,
+int gxio_trio_config_msi_intr(gxio_trio_context_t *context, int inter_x,
 			      int inter_y, int inter_ipi, int inter_event,
 			      unsigned int mac, unsigned int mem_map,
 			      uint64_t mem_map_base, uint64_t mem_map_limit,
@@ -259,7 +259,7 @@ struct set_mps_mrs_param {
 	unsigned int mac;
 };
 
-int gxio_trio_set_mps_mrs(gxio_trio_context_t * context, uint16_t mps,
+int gxio_trio_set_mps_mrs(gxio_trio_context_t *context, uint16_t mps,
 			  uint16_t mrs, unsigned int mac)
 {
 	struct set_mps_mrs_param temp;
@@ -279,7 +279,7 @@ struct force_rc_link_up_param {
 	unsigned int mac;
 };
 
-int gxio_trio_force_rc_link_up(gxio_trio_context_t * context, unsigned int mac)
+int gxio_trio_force_rc_link_up(gxio_trio_context_t *context, unsigned int mac)
 {
 	struct force_rc_link_up_param temp;
 	struct force_rc_link_up_param *params = &temp;
@@ -296,7 +296,7 @@ struct force_ep_link_up_param {
 	unsigned int mac;
 };
 
-int gxio_trio_force_ep_link_up(gxio_trio_context_t * context, unsigned int mac)
+int gxio_trio_force_ep_link_up(gxio_trio_context_t *context, unsigned int mac)
 {
 	struct force_ep_link_up_param temp;
 	struct force_ep_link_up_param *params = &temp;
@@ -313,7 +313,7 @@ struct get_mmio_base_param {
 	HV_PTE base;
 };
 
-int gxio_trio_get_mmio_base(gxio_trio_context_t * context, HV_PTE *base)
+int gxio_trio_get_mmio_base(gxio_trio_context_t *context, HV_PTE *base)
 {
 	int __result;
 	struct get_mmio_base_param temp;
@@ -334,7 +334,7 @@ struct check_mmio_offset_param {
 	unsigned long size;
 };
 
-int gxio_trio_check_mmio_offset(gxio_trio_context_t * context,
+int gxio_trio_check_mmio_offset(gxio_trio_context_t *context,
 				unsigned long offset, unsigned long size)
 {
 	struct check_mmio_offset_param temp;

arch/tile/gxio/iorpc_usb_host.c

@@ -19,7 +19,7 @@ struct cfg_interrupt_param {
 	union iorpc_interrupt interrupt;
 };
 
-int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t * context, int inter_x,
+int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t *context, int inter_x,
 				int inter_y, int inter_ipi, int inter_event)
 {
 	struct cfg_interrupt_param temp;
@@ -41,7 +41,7 @@ struct register_client_memory_param {
 	unsigned int flags;
 };
 
-int gxio_usb_host_register_client_memory(gxio_usb_host_context_t * context,
+int gxio_usb_host_register_client_memory(gxio_usb_host_context_t *context,
 					 HV_PTE pte, unsigned int flags)
 {
 	struct register_client_memory_param temp;
@@ -61,7 +61,7 @@ struct get_mmio_base_param {
 	HV_PTE base;
 };
 
-int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t * context, HV_PTE *base)
+int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t *context, HV_PTE *base)
 {
 	int __result;
 	struct get_mmio_base_param temp;
@@ -82,7 +82,7 @@ struct check_mmio_offset_param {
 	unsigned long size;
 };
 
-int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t * context,
+int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t *context,
 				    unsigned long offset, unsigned long size)
 {
 	struct check_mmio_offset_param temp;

arch/tile/gxio/usb_host.c

@@ -26,7 +26,7 @@
 #include <gxio/kiorpc.h>
 #include <gxio/usb_host.h>
 
-int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
+int gxio_usb_host_init(gxio_usb_host_context_t *context, int usb_index,
 		       int is_ehci)
 {
 	char file[32];
@@ -63,7 +63,7 @@ int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
 
 EXPORT_SYMBOL_GPL(gxio_usb_host_init);
 
-int gxio_usb_host_destroy(gxio_usb_host_context_t * context)
+int gxio_usb_host_destroy(gxio_usb_host_context_t *context)
 {
 	iounmap((void __force __iomem *)(context->mmio_base));
 	hv_dev_close(context->fd);
@@ -76,14 +76,14 @@ int gxio_usb_host_destroy(gxio_usb_host_context_t * context)
 
 EXPORT_SYMBOL_GPL(gxio_usb_host_destroy);
 
-void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t * context)
+void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t *context)
 {
 	return context->mmio_base;
 }
 
 EXPORT_SYMBOL_GPL(gxio_usb_host_get_reg_start);
 
-size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t * context)
+size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t *context)
 {
 	return HV_USB_HOST_MMIO_SIZE;
 }

arch/tile/include/arch/mpipe.h

@@ -176,7 +176,18 @@ typedef union
      */
     uint_reg_t stack_idx    : 5;
     /* Reserved. */
-    uint_reg_t __reserved_2 : 5;
+    uint_reg_t __reserved_2 : 3;
+    /*
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware. This field is ignored on writes.
+     */
+    uint_reg_t inst         : 2;
     /*
      * Reads as one to indicate that this is a hardware managed buffer.
      * Ignored on writes since all buffers on a given stack are the same size.
@@ -205,7 +216,8 @@ typedef union
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_2 : 5;
+    uint_reg_t inst         : 2;
+    uint_reg_t __reserved_2 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_1 : 6;
     int_reg_t va           : 35;
@@ -231,9 +243,9 @@ typedef union
     /* Reserved. */
     uint_reg_t __reserved_0 : 3;
     /* eDMA ring being accessed */
-    uint_reg_t ring         : 5;
+    uint_reg_t ring         : 6;
     /* Reserved. */
-    uint_reg_t __reserved_1 : 18;
+    uint_reg_t __reserved_1 : 17;
     /*
      * This field of the address selects the region (address space) to be
      * accessed.  For the egress DMA post region, this field must be 5.
@@ -250,8 +262,8 @@ typedef union
     uint_reg_t svc_dom      : 5;
     uint_reg_t __reserved_2 : 6;
     uint_reg_t region       : 3;
-    uint_reg_t __reserved_1 : 18;
-    uint_reg_t ring         : 5;
+    uint_reg_t __reserved_1 : 17;
+    uint_reg_t ring         : 6;
     uint_reg_t __reserved_0 : 3;
 #endif
   };

arch/tile/include/arch/mpipe_constants.h

@@ -16,13 +16,13 @@
 #ifndef __ARCH_MPIPE_CONSTANTS_H__
 #define __ARCH_MPIPE_CONSTANTS_H__
 
-#define MPIPE_NUM_CLASSIFIERS 10
+#define MPIPE_NUM_CLASSIFIERS 16
 #define MPIPE_CLS_MHZ 1200
 
-#define MPIPE_NUM_EDMA_RINGS 32
+#define MPIPE_NUM_EDMA_RINGS 64
 
 #define MPIPE_NUM_SGMII_MACS 16
-#define MPIPE_NUM_XAUI_MACS 4
+#define MPIPE_NUM_XAUI_MACS 16
 #define MPIPE_NUM_LOOPBACK_CHANNELS 4
 #define MPIPE_NUM_NON_LB_CHANNELS 28
 

arch/tile/include/arch/mpipe_shm.h

@@ -44,8 +44,14 @@ typedef union
      * descriptors toggles each time the ring tail pointer wraps.
      */
     uint_reg_t gen        : 1;
+    /**
+     * For devices with EDMA reorder support, this field allows the
+     * descriptor to select the egress FIFO.  The associated DMA ring must
+     * have ALLOW_EFIFO_SEL enabled.
+     */
+    uint_reg_t efifo_sel  : 6;
     /** Reserved.  Must be zero. */
-    uint_reg_t r0         : 7;
+    uint_reg_t r0         : 1;
     /** Checksum generation enabled for this transfer. */
     uint_reg_t csum       : 1;
     /**
@@ -110,7 +116,8 @@ typedef union
     uint_reg_t notif      : 1;
     uint_reg_t ns         : 1;
     uint_reg_t csum       : 1;
-    uint_reg_t r0         : 7;
+    uint_reg_t r0         : 1;
+    uint_reg_t efifo_sel  : 6;
     uint_reg_t gen        : 1;
 #endif
 
@@ -126,14 +133,16 @@ typedef union
     /** Reserved. */
     uint_reg_t __reserved_1 : 3;
     /**
-     * Instance ID.  For devices that support more than one mPIPE instance,
-     * this field indicates the buffer owner.  If the INST field does not
-     * match the mPIPE's instance number when a packet is egressed, buffers
-     * with HWB set will be returned to the other mPIPE instance.
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware.
      */
-    uint_reg_t inst         : 1;
-    /** Reserved. */
-    uint_reg_t __reserved_2 : 1;
+    uint_reg_t inst         : 2;
     /**
      * Always set to one by hardware in iDMA packet descriptors.  For eDMA,
      * indicates whether the buffer will be released to the buffer stack
@@ -166,8 +175,7 @@ typedef union
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_2 : 1;
-    uint_reg_t inst         : 1;
+    uint_reg_t inst         : 2;
     uint_reg_t __reserved_1 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_0 : 6;
@@ -408,7 +416,10 @@ typedef union
     /**
      * Sequence number applied when packet is distributed.   Classifier
      * selects which sequence number is to be applied by writing the 13-bit
-     * SQN-selector into this field.
+     * SQN-selector into this field.  For devices that support EXT_SQN (as
+     * indicated in IDMA_INFO.EXT_SQN_SUPPORT), the GP_SQN can be extended to
+     * 32-bits via the IDMA_CTL.EXT_SQN register.  In this case the
+     * PACKET_SQN will be reduced to 32 bits.
      */
     uint_reg_t gp_sqn     : 16;
     /**
@@ -451,14 +462,16 @@ typedef union
     /** Reserved. */
     uint_reg_t __reserved_5 : 3;
     /**
-     * Instance ID.  For devices that support more than one mPIPE instance,
-     * this field indicates the buffer owner.  If the INST field does not
-     * match the mPIPE's instance number when a packet is egressed, buffers
-     * with HWB set will be returned to the other mPIPE instance.
+     * Instance ID.  For devices that support automatic buffer return between
+     * mPIPE instances, this field indicates the buffer owner.  If the INST
+     * field does not match the mPIPE's instance number when a packet is
+     * egressed, buffers with HWB set will be returned to the other mPIPE
+     * instance.  Note that not all devices support multi-mPIPE buffer
+     * return.  The MPIPE_EDMA_INFO.REMOTE_BUFF_RTN_SUPPORT bit indicates
+     * whether the INST field in the buffer descriptor is populated by iDMA
+     * hardware.
      */
-    uint_reg_t inst         : 1;
-    /** Reserved. */
-    uint_reg_t __reserved_6 : 1;
+    uint_reg_t inst         : 2;
     /**
      * Always set to one by hardware in iDMA packet descriptors.  For eDMA,
      * indicates whether the buffer will be released to the buffer stack
@@ -491,8 +504,7 @@ typedef union
     uint_reg_t c            : 2;
     uint_reg_t size         : 3;
     uint_reg_t hwb          : 1;
-    uint_reg_t __reserved_6 : 1;
-    uint_reg_t inst         : 1;
+    uint_reg_t inst         : 2;
     uint_reg_t __reserved_5 : 3;
     uint_reg_t stack_idx    : 5;
     uint_reg_t __reserved_4 : 6;

arch/tile/include/arch/trio_constants.h

@@ -16,21 +16,21 @@
 #ifndef __ARCH_TRIO_CONSTANTS_H__
 #define __ARCH_TRIO_CONSTANTS_H__
 
-#define TRIO_NUM_ASIDS 16
+#define TRIO_NUM_ASIDS 32
 #define TRIO_NUM_TLBS_PER_ASID 16
 
 #define TRIO_NUM_TPIO_REGIONS 8
 #define TRIO_LOG2_NUM_TPIO_REGIONS 3
 
-#define TRIO_NUM_MAP_MEM_REGIONS 16
-#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 4
+#define TRIO_NUM_MAP_MEM_REGIONS 32
+#define TRIO_LOG2_NUM_MAP_MEM_REGIONS 5
 #define TRIO_NUM_MAP_SQ_REGIONS 8
 #define TRIO_LOG2_NUM_MAP_SQ_REGIONS 3
 
 #define TRIO_LOG2_NUM_SQ_FIFO_ENTRIES 6
 
-#define TRIO_NUM_PUSH_DMA_RINGS 32
+#define TRIO_NUM_PUSH_DMA_RINGS 64
 
-#define TRIO_NUM_PULL_DMA_RINGS 32
+#define TRIO_NUM_PULL_DMA_RINGS 64
 
 #endif /* __ARCH_TRIO_CONSTANTS_H__ */

arch/tile/include/asm/page.h

@@ -182,10 +182,9 @@ static inline __attribute_const__ int get_order(unsigned long size)
 
 #define PAGE_OFFSET		(-(_AC(1, UL) << (MAX_VA_WIDTH - 1)))
 #define KERNEL_HIGH_VADDR	_AC(0xfffffff800000000, UL)  /* high 32GB */
-#define FIXADDR_BASE		(KERNEL_HIGH_VADDR - 0x400000000) /* 4 GB */
-#define FIXADDR_TOP		(KERNEL_HIGH_VADDR - 0x300000000) /* 4 GB */
+#define FIXADDR_BASE		(KERNEL_HIGH_VADDR - 0x300000000) /* 4 GB */
+#define FIXADDR_TOP		(KERNEL_HIGH_VADDR - 0x200000000) /* 4 GB */
 #define _VMALLOC_START		FIXADDR_TOP
-#define HUGE_VMAP_BASE		(KERNEL_HIGH_VADDR - 0x200000000) /* 4 GB */
 #define MEM_SV_START		(KERNEL_HIGH_VADDR - 0x100000000) /* 256 MB */
 #define MEM_MODULE_START	(MEM_SV_START + (256*1024*1024)) /* 256 MB */
 #define MEM_MODULE_END		(MEM_MODULE_START + (256*1024*1024))

arch/tile/include/asm/pgtable_32.h

@@ -55,17 +55,9 @@
 #define PKMAP_BASE   ((FIXADDR_BOOT_START - PAGE_SIZE*LAST_PKMAP) & PGDIR_MASK)
 
 #ifdef CONFIG_HIGHMEM
-# define __VMAPPING_END	(PKMAP_BASE & ~(HPAGE_SIZE-1))
+# define _VMALLOC_END	(PKMAP_BASE & ~(HPAGE_SIZE-1))
 #else
-# define __VMAPPING_END	(FIXADDR_START & ~(HPAGE_SIZE-1))
-#endif
-
-#ifdef CONFIG_HUGEVMAP
-#define HUGE_VMAP_END	__VMAPPING_END
-#define HUGE_VMAP_BASE	(HUGE_VMAP_END - CONFIG_NR_HUGE_VMAPS * HPAGE_SIZE)
-#define _VMALLOC_END	HUGE_VMAP_BASE
-#else
-#define _VMALLOC_END	__VMAPPING_END
+# define _VMALLOC_END	(FIXADDR_START & ~(HPAGE_SIZE-1))
 #endif
 
 /*

arch/tile/include/asm/pgtable_64.h

@@ -52,12 +52,10 @@
  * memory allocation code).  The vmalloc code puts in an internal
  * guard page between each allocation.
  */
-#define _VMALLOC_END	HUGE_VMAP_BASE
+#define _VMALLOC_END	MEM_SV_START
 #define VMALLOC_END	_VMALLOC_END
 #define VMALLOC_START	_VMALLOC_START
 
-#define HUGE_VMAP_END	(HUGE_VMAP_BASE + PGDIR_SIZE)
-
 #ifndef __ASSEMBLY__
 
 /* We have no pud since we are a three-level page table. */

arch/tile/include/gxio/iorpc_mpipe.h

@@ -56,89 +56,89 @@
 #define GXIO_MPIPE_OP_GET_MMIO_BASE    IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_MPIPE_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
-int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_buffer_stacks(gxio_mpipe_context_t *context,
 				   unsigned int count, unsigned int first,
 				   unsigned int flags);
 
-int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_init_buffer_stack_aux(gxio_mpipe_context_t *context,
 				     void *mem_va, size_t mem_size,
 				     unsigned int mem_flags, unsigned int stack,
 				     unsigned int buffer_size_enum);
 
 
-int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_notif_rings(gxio_mpipe_context_t *context,
 				 unsigned int count, unsigned int first,
 				 unsigned int flags);
 
-int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
+int gxio_mpipe_init_notif_ring_aux(gxio_mpipe_context_t *context, void *mem_va,
 				   size_t mem_size, unsigned int mem_flags,
 				   unsigned int ring);
 
-int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t * context,
+int gxio_mpipe_request_notif_ring_interrupt(gxio_mpipe_context_t *context,
 					    int inter_x, int inter_y,
 					    int inter_ipi, int inter_event,
 					    unsigned int ring);
 
-int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t * context,
+int gxio_mpipe_enable_notif_ring_interrupt(gxio_mpipe_context_t *context,
 					   unsigned int ring);
 
-int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_notif_groups(gxio_mpipe_context_t *context,
 				  unsigned int count, unsigned int first,
 				  unsigned int flags);
 
-int gxio_mpipe_init_notif_group(gxio_mpipe_context_t * context,
+int gxio_mpipe_init_notif_group(gxio_mpipe_context_t *context,
 				unsigned int group,
 				gxio_mpipe_notif_group_bits_t bits);
 
-int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t * context, unsigned int count,
+int gxio_mpipe_alloc_buckets(gxio_mpipe_context_t *context, unsigned int count,
 			     unsigned int first, unsigned int flags);
 
-int gxio_mpipe_init_bucket(gxio_mpipe_context_t * context, unsigned int bucket,
+int gxio_mpipe_init_bucket(gxio_mpipe_context_t *context, unsigned int bucket,
 			   MPIPE_LBL_INIT_DAT_BSTS_TBL_t bucket_info);
 
-int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t * context,
+int gxio_mpipe_alloc_edma_rings(gxio_mpipe_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags);
 
-int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t * context, void *mem_va,
+int gxio_mpipe_init_edma_ring_aux(gxio_mpipe_context_t *context, void *mem_va,
 				  size_t mem_size, unsigned int mem_flags,
 				  unsigned int ring, unsigned int channel);
 
 
-int gxio_mpipe_commit_rules(gxio_mpipe_context_t * context, const void *blob,
+int gxio_mpipe_commit_rules(gxio_mpipe_context_t *context, const void *blob,
 			    size_t blob_size);
 
-int gxio_mpipe_register_client_memory(gxio_mpipe_context_t * context,
+int gxio_mpipe_register_client_memory(gxio_mpipe_context_t *context,
 				      unsigned int iotlb, HV_PTE pte,
 				      unsigned int flags);
 
-int gxio_mpipe_link_open_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_link_open_aux(gxio_mpipe_context_t *context,
 			     _gxio_mpipe_link_name_t name, unsigned int flags);
 
-int gxio_mpipe_link_close_aux(gxio_mpipe_context_t * context, int mac);
+int gxio_mpipe_link_close_aux(gxio_mpipe_context_t *context, int mac);
 
-int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t * context, int mac,
+int gxio_mpipe_link_set_attr_aux(gxio_mpipe_context_t *context, int mac,
 				 uint32_t attr, int64_t val);
 
-int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t * context, uint64_t * sec,
-				 uint64_t * nsec, uint64_t * cycles);
+int gxio_mpipe_get_timestamp_aux(gxio_mpipe_context_t *context, uint64_t *sec,
+				 uint64_t *nsec, uint64_t *cycles);
 
-int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t * context, uint64_t sec,
+int gxio_mpipe_set_timestamp_aux(gxio_mpipe_context_t *context, uint64_t sec,
 				 uint64_t nsec, uint64_t cycles);
 
-int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t * context,
+int gxio_mpipe_adjust_timestamp_aux(gxio_mpipe_context_t *context,
 				    int64_t nsec);
 
-int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t * context,
+int gxio_mpipe_adjust_timestamp_freq(gxio_mpipe_context_t *context,
 				     int32_t ppb);
 
-int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie);
+int gxio_mpipe_arm_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie);
 
-int gxio_mpipe_close_pollfd(gxio_mpipe_context_t * context, int pollfd_cookie);
+int gxio_mpipe_close_pollfd(gxio_mpipe_context_t *context, int pollfd_cookie);
 
-int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t * context, HV_PTE *base);
+int gxio_mpipe_get_mmio_base(gxio_mpipe_context_t *context, HV_PTE *base);
 
-int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t * context,
+int gxio_mpipe_check_mmio_offset(gxio_mpipe_context_t *context,
 				 unsigned long offset, unsigned long size);
 
 #endif /* !__GXIO_MPIPE_LINUX_RPC_H__ */

arch/tile/include/gxio/iorpc_mpipe_info.h

@@ -33,18 +33,18 @@
 #define GXIO_MPIPE_INFO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
 
-int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_instance_aux(gxio_mpipe_info_context_t *context,
 				 _gxio_mpipe_link_name_t name);
 
-int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_enumerate_aux(gxio_mpipe_info_context_t *context,
 				  unsigned int idx,
-				  _gxio_mpipe_link_name_t * name,
-				  _gxio_mpipe_link_mac_t * mac);
+				  _gxio_mpipe_link_name_t *name,
+				  _gxio_mpipe_link_mac_t *mac);
 
-int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_get_mmio_base(gxio_mpipe_info_context_t *context,
 				  HV_PTE *base);
 
-int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t * context,
+int gxio_mpipe_info_check_mmio_offset(gxio_mpipe_info_context_t *context,
 				      unsigned long offset, unsigned long size);
 
 #endif /* !__GXIO_MPIPE_INFO_LINUX_RPC_H__ */

arch/tile/include/gxio/iorpc_trio.h

@@ -46,59 +46,59 @@
 #define GXIO_TRIO_OP_GET_MMIO_BASE     IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_TRIO_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
-int gxio_trio_alloc_asids(gxio_trio_context_t * context, unsigned int count,
+int gxio_trio_alloc_asids(gxio_trio_context_t *context, unsigned int count,
 			  unsigned int first, unsigned int flags);
 
 
-int gxio_trio_alloc_memory_maps(gxio_trio_context_t * context,
+int gxio_trio_alloc_memory_maps(gxio_trio_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags);
 
 
-int gxio_trio_alloc_scatter_queues(gxio_trio_context_t * context,
+int gxio_trio_alloc_scatter_queues(gxio_trio_context_t *context,
 				   unsigned int count, unsigned int first,
 				   unsigned int flags);
 
-int gxio_trio_alloc_pio_regions(gxio_trio_context_t * context,
+int gxio_trio_alloc_pio_regions(gxio_trio_context_t *context,
 				unsigned int count, unsigned int first,
 				unsigned int flags);
 
-int gxio_trio_init_pio_region_aux(gxio_trio_context_t * context,
+int gxio_trio_init_pio_region_aux(gxio_trio_context_t *context,
 				  unsigned int pio_region, unsigned int mac,
 				  uint32_t bus_address_hi, unsigned int flags);
 
 
-int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t * context,
+int gxio_trio_init_memory_map_mmu_aux(gxio_trio_context_t *context,
 				      unsigned int map, unsigned long va,
 				      uint64_t size, unsigned int asid,
 				      unsigned int mac, uint64_t bus_address,
 				      unsigned int node,
 				      unsigned int order_mode);
 
-int gxio_trio_get_port_property(gxio_trio_context_t * context,
+int gxio_trio_get_port_property(gxio_trio_context_t *context,
 				struct pcie_trio_ports_property *trio_ports);
 
-int gxio_trio_config_legacy_intr(gxio_trio_context_t * context, int inter_x,
+int gxio_trio_config_legacy_intr(gxio_trio_context_t *context, int inter_x,
 				 int inter_y, int inter_ipi, int inter_event,
 				 unsigned int mac, unsigned int intx);
 
-int gxio_trio_config_msi_intr(gxio_trio_context_t * context, int inter_x,
+int gxio_trio_config_msi_intr(gxio_trio_context_t *context, int inter_x,
 			      int inter_y, int inter_ipi, int inter_event,
 			      unsigned int mac, unsigned int mem_map,
 			      uint64_t mem_map_base, uint64_t mem_map_limit,
 			      unsigned int asid);
 
 
-int gxio_trio_set_mps_mrs(gxio_trio_context_t * context, uint16_t mps,
+int gxio_trio_set_mps_mrs(gxio_trio_context_t *context, uint16_t mps,
 			  uint16_t mrs, unsigned int mac);
 
-int gxio_trio_force_rc_link_up(gxio_trio_context_t * context, unsigned int mac);
+int gxio_trio_force_rc_link_up(gxio_trio_context_t *context, unsigned int mac);
 
-int gxio_trio_force_ep_link_up(gxio_trio_context_t * context, unsigned int mac);
+int gxio_trio_force_ep_link_up(gxio_trio_context_t *context, unsigned int mac);
 
-int gxio_trio_get_mmio_base(gxio_trio_context_t * context, HV_PTE *base);
+int gxio_trio_get_mmio_base(gxio_trio_context_t *context, HV_PTE *base);
 
-int gxio_trio_check_mmio_offset(gxio_trio_context_t * context,
+int gxio_trio_check_mmio_offset(gxio_trio_context_t *context,
 				unsigned long offset, unsigned long size);
 
 #endif /* !__GXIO_TRIO_LINUX_RPC_H__ */

arch/tile/include/gxio/iorpc_usb_host.h

@@ -31,16 +31,16 @@
 #define GXIO_USB_HOST_OP_GET_MMIO_BASE IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8000)
 #define GXIO_USB_HOST_OP_CHECK_MMIO_OFFSET IORPC_OPCODE(IORPC_FORMAT_NONE_NOUSER, 0x8001)
 
-int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t * context, int inter_x,
+int gxio_usb_host_cfg_interrupt(gxio_usb_host_context_t *context, int inter_x,
 				int inter_y, int inter_ipi, int inter_event);
 
-int gxio_usb_host_register_client_memory(gxio_usb_host_context_t * context,
+int gxio_usb_host_register_client_memory(gxio_usb_host_context_t *context,
 					 HV_PTE pte, unsigned int flags);
 
-int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t * context,
+int gxio_usb_host_get_mmio_base(gxio_usb_host_context_t *context,
 				HV_PTE *base);
 
-int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t * context,
+int gxio_usb_host_check_mmio_offset(gxio_usb_host_context_t *context,
 				    unsigned long offset, unsigned long size);
 
 #endif /* !__GXIO_USB_HOST_LINUX_RPC_H__ */

arch/tile/include/gxio/usb_host.h

@@ -53,7 +53,7 @@ typedef struct {
  * @return Zero if the context was successfully initialized, else a
  *  GXIO_ERR_xxx error code.
  */
-extern int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
+extern int gxio_usb_host_init(gxio_usb_host_context_t *context, int usb_index,
 			      int is_ehci);
 
 /* Destroy a USB context.
@@ -68,20 +68,20 @@ extern int gxio_usb_host_init(gxio_usb_host_context_t * context, int usb_index,
  * @return Zero if the context was successfully destroyed, else a
  *  GXIO_ERR_xxx error code.
  */
-extern int gxio_usb_host_destroy(gxio_usb_host_context_t * context);
+extern int gxio_usb_host_destroy(gxio_usb_host_context_t *context);
 
 /* Retrieve the address of the shim's MMIO registers.
  *
  * @param context Pointer to a properly initialized gxio_usb_host_context_t.
  * @return The address of the shim's MMIO registers.
  */
-extern void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t * context);
+extern void *gxio_usb_host_get_reg_start(gxio_usb_host_context_t *context);
 
 /* Retrieve the length of the shim's MMIO registers.
  *
  * @param context Pointer to a properly initialized gxio_usb_host_context_t.
  * @return The length of the shim's MMIO registers.
  */
-extern size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t * context);
+extern size_t gxio_usb_host_get_reg_len(gxio_usb_host_context_t *context);
 
 #endif /* _GXIO_USB_H_ */

arch/tile/kernel/compat.c

@@ -84,7 +84,7 @@ COMPAT_SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned int, offset_high,
 {
 	return sys_llseek(fd, offset_high, offset_low, result, origin);
 }
- 
+
 /* Provide the compat syscall number to call mapping. */
 #undef __SYSCALL
 #define __SYSCALL(nr, call) [nr] = (call),

arch/tile/kernel/futex_64.S

-/*
- * Copyright 2011 Tilera Corporation. All Rights Reserved.
- *
- *   This program is free software; you can redistribute it and/or
- *   modify it under the terms of the GNU General Public License
- *   as published by the Free Software Foundation, version 2.
- *
- *   This program is distributed in the hope that it will be useful, but
- *   WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- *   NON INFRINGEMENT.  See the GNU General Public License for
- *   more details.
- *
- * Atomically access user memory, but use MMU to avoid propagating
- * kernel exceptions.
- */
-
-#include <linux/linkage.h>
-#include <asm/errno.h>
-#include <asm/futex.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-
-/*
- * Provide a set of atomic memory operations supporting <asm/futex.h>.
- *
- * r0: user address to manipulate
- * r1: new value to write, or for cmpxchg, old value to compare against
- * r2: (cmpxchg only) new value to write
- *
- * Return __get_user struct, r0 with value, r1 with error.
- */
-#define FUTEX_OP(name, ...) \
-STD_ENTRY(futex_##name)			\
-	__VA_ARGS__;			\
-	{				\
-	 move   r1, zero;		\
-	 jrp    lr			\
-	};				\
-	STD_ENDPROC(futex_##name);	\
-	.pushsection __ex_table,"a";	\
-	.quad 1b, get_user_fault;	\
-	.popsection
-
-	.pushsection .fixup,"ax"
-get_user_fault:
-	{ movei r1, -EFAULT; jrp lr }
-	ENDPROC(get_user_fault)
-	.popsection
-
-FUTEX_OP(cmpxchg, mtspr CMPEXCH_VALUE, r1; 1: cmpexch4 r0, r0, r2)
-FUTEX_OP(set, 1: exch4 r0, r0, r1)
-FUTEX_OP(add, 1: fetchadd4 r0, r0, r1)
-FUTEX_OP(or, 1: fetchor4 r0, r0, r1)
-FUTEX_OP(andn, nor r1, r1, zero; 1: fetchand4 r0, r0, r1)

arch/tile/kernel/setup.c

@@ -1268,8 +1268,7 @@ static void __init validate_va(void)
 	if ((long)VMALLOC_START >= 0)
 		early_panic(
 			"Linux VMALLOC region below the 2GB line (%#lx)!\n"
-			"Reconfigure the kernel with fewer NR_HUGE_VMAPS\n"
-			"or smaller VMALLOC_RESERVE.\n",
+			"Reconfigure the kernel with smaller VMALLOC_RESERVE.\n",
 			VMALLOC_START);
 #endif
 }

arch/tile/kernel/unaligned.c

@@ -551,8 +551,8 @@ static tilegx_bundle_bits  jit_x1_bnezt(int ra, int broff)
 /*
  * This function generates unalign fixup JIT.
  *
- * We fist find unalign load/store instruction's destination, source
- * reguisters: ra, rb and rd. and 3 scratch registers by calling
+ * We first find unalign load/store instruction's destination, source
+ * registers: ra, rb and rd. and 3 scratch registers by calling
  * find_regs(...). 3 scratch clobbers should not alias with any register
  * used in the fault bundle. Then analyze the fault bundle to determine
  * if it's a load or store, operand width, branch or address increment etc.

arch/tile/mm/fault.c

@@ -149,8 +149,6 @@ static inline int vmalloc_fault(pgd_t *pgd, unsigned long address)
 	pmd_k = vmalloc_sync_one(pgd, address);
 	if (!pmd_k)
 		return -1;
-	if (pmd_huge(*pmd_k))
-		return 0;   /* support TILE huge_vmap() API */
 	pte_k = pte_offset_kernel(pmd_k, address);
 	if (!pte_present(*pte_k))
 		return -1;

arch/tile/mm/init.c

@@ -827,10 +827,6 @@ void __init mem_init(void)
 	       FIXADDR_START, FIXADDR_TOP + PAGE_SIZE - 1);
 	printk(KERN_DEBUG "  PKMAP   %#lx - %#lx\n",
 	       PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP) - 1);
-#endif
-#ifdef CONFIG_HUGEVMAP
-	printk(KERN_DEBUG "  HUGEMAP %#lx - %#lx\n",
-	       HUGE_VMAP_BASE, HUGE_VMAP_END - 1);
 #endif
 	printk(KERN_DEBUG "  VMALLOC %#lx - %#lx\n",
 	       _VMALLOC_START, _VMALLOC_END - 1);

arch/tile/mm/pgtable.c

@@ -127,8 +127,7 @@ void shatter_huge_page(unsigned long addr)
 	}
 
 	/* Shatter the huge page into the preallocated L2 page table. */
-	pmd_populate_kernel(&init_mm, pmd,
-			    get_prealloc_pte(pte_pfn(*(pte_t *)pmd)));
+	pmd_populate_kernel(&init_mm, pmd, get_prealloc_pte(pmd_pfn(*pmd)));
 
 #ifdef __PAGETABLE_PMD_FOLDED
 	/* Walk every pgd on the system and update the pmd there. */