x86: irqflags consolidation

This patch consolidates the irqflags include files containing common
paravirt definitions. The native definition for interrupt handling, halt,
and such, are the same for 32 and 64 bit, and they are kept in irqflags.h.
the differences are split in the arch-specific files.

The syscall function, irq_enable_sysexit, has a very specific i386 naming,
and its name is then changed to a more general one.
Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NJeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

arch/x86/kernel/asm-offsets_32.c

@@ -123,7 +123,7 @@ void foo(void)
 	OFFSET(PV_IRQ_irq_disable, pv_irq_ops, irq_disable);
 	OFFSET(PV_IRQ_irq_enable, pv_irq_ops, irq_enable);
 	OFFSET(PV_CPU_iret, pv_cpu_ops, iret);
-	OFFSET(PV_CPU_irq_enable_sysexit, pv_cpu_ops, irq_enable_sysexit);
+	OFFSET(PV_CPU_irq_enable_syscall_ret, pv_cpu_ops, irq_enable_syscall_ret);
 	OFFSET(PV_CPU_read_cr0, pv_cpu_ops, read_cr0);
 #endif
 

arch/x86/kernel/entry_32.S

@@ -58,7 +58,7 @@
  * for paravirtualization.  The following will never clobber any registers:
  *   INTERRUPT_RETURN (aka. "iret")
  *   GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
- *   ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ *   ENABLE_INTERRUPTS_SYSCALL_RET (aka "sti; sysexit").
  *
  * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
  * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
@@ -351,7 +351,7 @@ sysenter_past_esp:
 	xorl %ebp,%ebp
 	TRACE_IRQS_ON
 1:	mov  PT_FS(%esp), %fs
-	ENABLE_INTERRUPTS_SYSEXIT
+	ENABLE_INTERRUPTS_SYSCALL_RET
 	CFI_ENDPROC
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
@@ -882,10 +882,10 @@ ENTRY(native_iret)
 .previous
 END(native_iret)
 
-ENTRY(native_irq_enable_sysexit)
+ENTRY(native_irq_enable_syscall_ret)
 	sti
 	sysexit
-END(native_irq_enable_sysexit)
+END(native_irq_enable_syscall_ret)
 #endif
 
 KPROBE_ENTRY(int3)

arch/x86/kernel/paravirt_32.c

@@ -60,7 +60,7 @@ DEF_NATIVE(pv_irq_ops, irq_enable, "sti");
 DEF_NATIVE(pv_irq_ops, restore_fl, "push %eax; popf");
 DEF_NATIVE(pv_irq_ops, save_fl, "pushf; pop %eax");
 DEF_NATIVE(pv_cpu_ops, iret, "iret");
-DEF_NATIVE(pv_cpu_ops, irq_enable_sysexit, "sti; sysexit");
+DEF_NATIVE(pv_cpu_ops, irq_enable_syscall_ret, "sti; sysexit");
 DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
 DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
 DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
@@ -88,7 +88,7 @@ static unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
 	SITE(pv_irq_ops, restore_fl);
 	SITE(pv_irq_ops, save_fl);
 	SITE(pv_cpu_ops, iret);
-	SITE(pv_cpu_ops, irq_enable_sysexit);
+	SITE(pv_cpu_ops, irq_enable_syscall_ret);
 	SITE(pv_mmu_ops, read_cr2);
 	SITE(pv_mmu_ops, read_cr3);
 	SITE(pv_mmu_ops, write_cr3);
@@ -186,7 +186,7 @@ unsigned paravirt_patch_default(u8 type, u16 clobbers, void *insnbuf,
 		/* If the operation is a nop, then nop the callsite */
 		ret = paravirt_patch_nop();
 	else if (type == PARAVIRT_PATCH(pv_cpu_ops.iret) ||
-		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit))
+		 type == PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret))
 		/* If operation requires a jmp, then jmp */
 		ret = paravirt_patch_jmp(insnbuf, opfunc, addr, len);
 	else
@@ -237,7 +237,7 @@ static void native_flush_tlb_single(unsigned long addr)
 
 /* These are in entry.S */
 extern void native_iret(void);
-extern void native_irq_enable_sysexit(void);
+extern void native_irq_enable_syscall_ret(void);
 
 static int __init print_banner(void)
 {
@@ -384,7 +384,7 @@ struct pv_cpu_ops pv_cpu_ops = {
 	.write_idt_entry = write_dt_entry,
 	.load_esp0 = native_load_esp0,
 
-	.irq_enable_sysexit = native_irq_enable_sysexit,
+	.irq_enable_syscall_ret = native_irq_enable_syscall_ret,
 	.iret = native_iret,
 
 	.set_iopl_mask = native_set_iopl_mask,

arch/x86/kernel/vmi_32.c

@@ -148,7 +148,7 @@ static unsigned vmi_patch(u8 type, u16 clobbers, void *insns,
 					      insns, eip);
 		case PARAVIRT_PATCH(pv_cpu_ops.iret):
 			return patch_internal(VMI_CALL_IRET, len, insns, eip);
-		case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_sysexit):
+		case PARAVIRT_PATCH(pv_cpu_ops.irq_enable_syscall_ret):
 			return patch_internal(VMI_CALL_SYSEXIT, len, insns, eip);
 		default:
 			break;
@@ -870,7 +870,7 @@ static inline int __init activate_vmi(void)
 	 * the backend.  They are performance critical anyway, so requiring
 	 * a patch is not a big problem.
 	 */
-	pv_cpu_ops.irq_enable_sysexit = (void *)0xfeedbab0;
+	pv_cpu_ops.irq_enable_syscall_ret = (void *)0xfeedbab0;
 	pv_cpu_ops.iret = (void *)0xbadbab0;
 
 #ifdef CONFIG_SMP

arch/x86/xen/enlighten.c

@@ -953,7 +953,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.read_pmc = native_read_pmc,
 
 	.iret = (void *)&hypercall_page[__HYPERVISOR_iret],
-	.irq_enable_sysexit = NULL,  /* never called */
+	.irq_enable_syscall_ret = NULL,  /* never called */
 
 	.load_tr_desc = paravirt_nop,
 	.set_ldt = xen_set_ldt,

include/asm-x86/irqflags.h

-#ifdef CONFIG_X86_32
-# include "irqflags_32.h"
+#ifndef _X86_IRQFLAGS_H_
+#define _X86_IRQFLAGS_H_
+
+#include <asm/processor-flags.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * Interrupt control:
+ */
+
+static inline unsigned long native_save_fl(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__(
+		"# __raw_save_flags\n\t"
+		"pushf ; pop %0"
+		: "=g" (flags)
+		: /* no input */
+		: "memory"
+	);
+
+	return flags;
+}
+
+static inline void native_restore_fl(unsigned long flags)
+{
+	__asm__ __volatile__(
+		"push %0 ; popf"
+		: /* no output */
+		:"g" (flags)
+		:"memory", "cc"
+	);
+}
+
+static inline void native_irq_disable(void)
+{
+	asm volatile("cli": : :"memory");
+}
+
+static inline void native_irq_enable(void)
+{
+	asm volatile("sti": : :"memory");
+}
+
+static inline void native_safe_halt(void)
+{
+	asm volatile("sti; hlt": : :"memory");
+}
+
+static inline void native_halt(void)
+{
+	asm volatile("hlt": : :"memory");
+}
+
+#endif
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#else
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	return native_save_fl();
+}
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	native_restore_fl(flags);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	native_irq_disable();
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	native_irq_enable();
+}
+
+/*
+ * Used in the idle loop; sti takes one instruction cycle
+ * to complete:
+ */
+static inline void raw_safe_halt(void)
+{
+	native_safe_halt();
+}
+
+/*
+ * Used when interrupts are already enabled or to
+ * shutdown the processor:
+ */
+static inline void halt(void)
+{
+	native_halt();
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+#else
+
+#define ENABLE_INTERRUPTS(x)	sti
+#define DISABLE_INTERRUPTS(x)	cli
+
+#ifdef CONFIG_X86_64
+#define INTERRUPT_RETURN	iretq
+#define ENABLE_INTERRUPTS_SYSCALL_RET			\
+			movq	%gs:pda_oldrsp, %rsp;	\
+			swapgs;				\
+			sysretq;
+#else
+#define INTERRUPT_RETURN		iret
+#define ENABLE_INTERRUPTS_SYSCALL_RET	sti; sysexit
+#define GET_CR0_INTO_EAX		movl %cr0, %eax
+#endif
+
+
+#endif /* __ASSEMBLY__ */
+#endif /* CONFIG_PARAVIRT */
+
+#ifndef __ASSEMBLY__
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & X86_EFLAGS_IF);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * makes the traced hardirq state match with the machine state
+ *
+ * should be a rarely used function, only in places where its
+ * otherwise impossible to know the irq state, like in traps.
+ */
+static inline void trace_hardirqs_fixup_flags(unsigned long flags)
+{
+	if (raw_irqs_disabled_flags(flags))
+		trace_hardirqs_off();
+	else
+		trace_hardirqs_on();
+}
+
+static inline void trace_hardirqs_fixup(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	trace_hardirqs_fixup_flags(flags);
+}
+
 #else
-# include "irqflags_64.h"
+
+#ifdef CONFIG_X86_64
+/*
+ * Currently paravirt can't handle swapgs nicely when we
+ * don't have a stack we can rely on (such as a user space
+ * stack).  So we either find a way around these or just fault
+ * and emulate if a guest tries to call swapgs directly.
+ *
+ * Either way, this is a good way to document that we don't
+ * have a reliable stack. x86_64 only.
+ */
+#define SWAPGS_UNSAFE_STACK	swapgs
+#define ARCH_TRACE_IRQS_ON		call trace_hardirqs_on_thunk
+#define ARCH_TRACE_IRQS_OFF		call trace_hardirqs_off_thunk
+#define ARCH_LOCKDEP_SYS_EXIT		call lockdep_sys_exit_thunk
+#define ARCH_LOCKDEP_SYS_EXIT_IRQ	\
+	TRACE_IRQS_ON; \
+	sti; \
+	SAVE_REST; \
+	LOCKDEP_SYS_EXIT; \
+	RESTORE_REST; \
+	cli; \
+	TRACE_IRQS_OFF;
+
+#else
+#define ARCH_TRACE_IRQS_ON			\
+	pushl %eax;				\
+	pushl %ecx;				\
+	pushl %edx;				\
+	call trace_hardirqs_on;			\
+	popl %edx;				\
+	popl %ecx;				\
+	popl %eax;
+
+#define ARCH_TRACE_IRQS_OFF			\
+	pushl %eax;				\
+	pushl %ecx;				\
+	pushl %edx;				\
+	call trace_hardirqs_off;		\
+	popl %edx;				\
+	popl %ecx;				\
+	popl %eax;
+
+#define ARCH_LOCKDEP_SYS_EXIT			\
+	pushl %eax;				\
+	pushl %ecx;				\
+	pushl %edx;				\
+	call lockdep_sys_exit;			\
+	popl %edx;				\
+	popl %ecx;				\
+	popl %eax;
+
+#define ARCH_LOCKDEP_SYS_EXIT_IRQ
+#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+#  define TRACE_IRQS_ON		ARCH_TRACE_IRQS_ON
+#  define TRACE_IRQS_OFF	ARCH_TRACE_IRQS_OFF
+#else
+#  define TRACE_IRQS_ON
+#  define TRACE_IRQS_OFF
+#endif
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#  define LOCKDEP_SYS_EXIT	ARCH_LOCKDEP_SYS_EXIT
+#  define LOCKDEP_SYS_EXIT_IRQ	ARCH_LOCKDEP_SYS_EXIT_IRQ
+# else
+#  define LOCKDEP_SYS_EXIT
+#  define LOCKDEP_SYS_EXIT_IRQ
+# endif
+
+#endif /* __ASSEMBLY__ */
 #endif

include/asm-x86/irqflags_32.h

-/*
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-#include <asm/processor-flags.h>
-
-#ifndef __ASSEMBLY__
-static inline unsigned long native_save_fl(void)
-{
-	unsigned long f;
-	asm volatile("pushfl ; popl %0":"=g" (f): /* no input */);
-	return f;
-}
-
-static inline void native_restore_fl(unsigned long f)
-{
-	asm volatile("pushl %0 ; popfl": /* no output */
-			     :"g" (f)
-			     :"memory", "cc");
-}
-
-static inline void native_irq_disable(void)
-{
-	asm volatile("cli": : :"memory");
-}
-
-static inline void native_irq_enable(void)
-{
-	asm volatile("sti": : :"memory");
-}
-
-static inline void native_safe_halt(void)
-{
-	asm volatile("sti; hlt": : :"memory");
-}
-
-static inline void native_halt(void)
-{
-	asm volatile("hlt": : :"memory");
-}
-#endif	/* __ASSEMBLY__ */
-
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#ifndef __ASSEMBLY__
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	return native_save_fl();
-}
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	native_restore_fl(flags);
-}
-
-static inline void raw_local_irq_disable(void)
-{
-	native_irq_disable();
-}
-
-static inline void raw_local_irq_enable(void)
-{
-	native_irq_enable();
-}
-
-/*
- * Used in the idle loop; sti takes one instruction cycle
- * to complete:
- */
-static inline void raw_safe_halt(void)
-{
-	native_safe_halt();
-}
-
-/*
- * Used when interrupts are already enabled or to
- * shutdown the processor:
- */
-static inline void halt(void)
-{
-	native_halt();
-}
-
-/*
- * For spinlocks, etc:
- */
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	raw_local_irq_disable();
-
-	return flags;
-}
-
-#else
-#define DISABLE_INTERRUPTS(clobbers)	cli
-#define ENABLE_INTERRUPTS(clobbers)	sti
-#define ENABLE_INTERRUPTS_SYSEXIT	sti; sysexit
-#define INTERRUPT_RETURN		iret
-#define GET_CR0_INTO_EAX		movl %cr0, %eax
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_PARAVIRT */
-
-#ifndef __ASSEMBLY__
-#define raw_local_save_flags(flags) \
-		do { (flags) = __raw_local_save_flags(); } while (0)
-
-#define raw_local_irq_save(flags) \
-		do { (flags) = __raw_local_irq_save(); } while (0)
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return !(flags & X86_EFLAGS_IF);
-}
-
-static inline int raw_irqs_disabled(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	return raw_irqs_disabled_flags(flags);
-}
-
-/*
- * makes the traced hardirq state match with the machine state
- *
- * should be a rarely used function, only in places where its
- * otherwise impossible to know the irq state, like in traps.
- */
-static inline void trace_hardirqs_fixup_flags(unsigned long flags)
-{
-	if (raw_irqs_disabled_flags(flags))
-		trace_hardirqs_off();
-	else
-		trace_hardirqs_on();
-}
-
-static inline void trace_hardirqs_fixup(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	trace_hardirqs_fixup_flags(flags);
-}
-#endif /* __ASSEMBLY__ */
-
-/*
- * Do the CPU's IRQ-state tracing from assembly code. We call a
- * C function, so save all the C-clobbered registers:
- */
-#ifdef CONFIG_TRACE_IRQFLAGS
-
-# define TRACE_IRQS_ON				\
-	pushl %eax;				\
-	pushl %ecx;				\
-	pushl %edx;				\
-	call trace_hardirqs_on;			\
-	popl %edx;				\
-	popl %ecx;				\
-	popl %eax;
-
-# define TRACE_IRQS_OFF				\
-	pushl %eax;				\
-	pushl %ecx;				\
-	pushl %edx;				\
-	call trace_hardirqs_off;		\
-	popl %edx;				\
-	popl %ecx;				\
-	popl %eax;
-
-#else
-# define TRACE_IRQS_ON
-# define TRACE_IRQS_OFF
-#endif
-
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-# define LOCKDEP_SYS_EXIT			\
-	pushl %eax;				\
-	pushl %ecx;				\
-	pushl %edx;				\
-	call lockdep_sys_exit;			\
-	popl %edx;				\
-	popl %ecx;				\
-	popl %eax;
-#else
-# define LOCKDEP_SYS_EXIT
-#endif
-
-#endif

include/asm-x86/irqflags_64.h

-/*
- * IRQ flags handling
- *
- * This file gets included from lowlevel asm headers too, to provide
- * wrapped versions of the local_irq_*() APIs, based on the
- * raw_local_irq_*() functions from the lowlevel headers.
- */
-#ifndef _ASM_IRQFLAGS_H
-#define _ASM_IRQFLAGS_H
-#include <asm/processor-flags.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Interrupt control:
- */
-
-static inline unsigned long __raw_local_save_flags(void)
-{
-	unsigned long flags;
-
-	__asm__ __volatile__(
-		"# __raw_save_flags\n\t"
-		"pushfq ; popq %q0"
-		: "=g" (flags)
-		: /* no input */
-		: "memory"
-	);
-
-	return flags;
-}
-
-#define raw_local_save_flags(flags) \
-		do { (flags) = __raw_local_save_flags(); } while (0)
-
-static inline void raw_local_irq_restore(unsigned long flags)
-{
-	__asm__ __volatile__(
-		"pushq %0 ; popfq"
-		: /* no output */
-		:"g" (flags)
-		:"memory", "cc"
-	);
-}
-
-#ifdef CONFIG_X86_VSMP
-
-/*
- * Interrupt control for the VSMP architecture:
- */
-
-static inline void raw_local_irq_disable(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	raw_local_irq_restore((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
-}
-
-static inline void raw_local_irq_enable(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	raw_local_irq_restore((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return !(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC);
-}
-
-#else /* CONFIG_X86_VSMP */
-
-static inline void raw_local_irq_disable(void)
-{
-	__asm__ __volatile__("cli" : : : "memory");
-}
-
-static inline void raw_local_irq_enable(void)
-{
-	__asm__ __volatile__("sti" : : : "memory");
-}
-
-static inline int raw_irqs_disabled_flags(unsigned long flags)
-{
-	return !(flags & X86_EFLAGS_IF);
-}
-
-#endif
-
-/*
- * For spinlocks, etc.:
- */
-
-static inline unsigned long __raw_local_irq_save(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	raw_local_irq_disable();
-
-	return flags;
-}
-
-#define raw_local_irq_save(flags) \
-		do { (flags) = __raw_local_irq_save(); } while (0)
-
-static inline int raw_irqs_disabled(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	return raw_irqs_disabled_flags(flags);
-}
-
-/*
- * makes the traced hardirq state match with the machine state
- *
- * should be a rarely used function, only in places where its
- * otherwise impossible to know the irq state, like in traps.
- */
-static inline void trace_hardirqs_fixup_flags(unsigned long flags)
-{
-	if (raw_irqs_disabled_flags(flags))
-		trace_hardirqs_off();
-	else
-		trace_hardirqs_on();
-}
-
-static inline void trace_hardirqs_fixup(void)
-{
-	unsigned long flags = __raw_local_save_flags();
-
-	trace_hardirqs_fixup_flags(flags);
-}
-/*
- * Used in the idle loop; sti takes one instruction cycle
- * to complete:
- */
-static inline void raw_safe_halt(void)
-{
-	__asm__ __volatile__("sti; hlt" : : : "memory");
-}
-
-/*
- * Used when interrupts are already enabled or to
- * shutdown the processor:
- */
-static inline void halt(void)
-{
-	__asm__ __volatile__("hlt": : :"memory");
-}
-
-#else /* __ASSEMBLY__: */
-# ifdef CONFIG_TRACE_IRQFLAGS
-#  define TRACE_IRQS_ON		call trace_hardirqs_on_thunk
-#  define TRACE_IRQS_OFF	call trace_hardirqs_off_thunk
-# else
-#  define TRACE_IRQS_ON
-#  define TRACE_IRQS_OFF
-# endif
-# ifdef CONFIG_DEBUG_LOCK_ALLOC
-#  define LOCKDEP_SYS_EXIT	call lockdep_sys_exit_thunk
-#  define LOCKDEP_SYS_EXIT_IRQ	\
-	TRACE_IRQS_ON; \
-	sti; \
-	SAVE_REST; \
-	LOCKDEP_SYS_EXIT; \
-	RESTORE_REST; \
-	cli; \
-	TRACE_IRQS_OFF;
-# else
-#  define LOCKDEP_SYS_EXIT
-#  define LOCKDEP_SYS_EXIT_IRQ
-# endif
-#endif
-
-#endif

include/asm-x86/paravirt.h

@@ -121,7 +121,7 @@ struct pv_cpu_ops {
 	u64 (*read_pmc)(void);
 
 	/* These two are jmp to, not actually called. */
-	void (*irq_enable_sysexit)(void);
+	void (*irq_enable_syscall_ret)(void);
 	void (*iret)(void);
 
 	struct pv_lazy_ops lazy_mode;
@@ -1138,9 +1138,10 @@ static inline unsigned long __raw_local_irq_save(void)
 		  call *%cs:pv_irq_ops+PV_IRQ_irq_enable;		\
 		  popl %edx; popl %ecx; popl %eax)
 
-#define ENABLE_INTERRUPTS_SYSEXIT					       \
-	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_sysexit), CLBR_NONE,\
-		  jmp *%cs:pv_cpu_ops+PV_CPU_irq_enable_sysexit)
+#define ENABLE_INTERRUPTS_SYSCALL_RET					\
+	PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_irq_enable_syscall_ret),\
+		  CLBR_NONE,						\
+		  jmp *%cs:pv_cpu_ops+PV_CPU_irq_enable_syscall_ret)
 
 #define GET_CR0_INTO_EAX			\
 	push %ecx; push %edx;			\