提交 6aa966e6 编写于 作者: G Guennadi Liakhovetski 提交者: Paul Mundt

fbdev: sh_mobile_hdmi: cosmetic improvements

Improve comments, unify function names, replace pr_debug with dev_dbg.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 1c120deb
......@@ -206,7 +206,7 @@ enum hotplug_state {
struct sh_hdmi {
void __iomem *base;
enum hotplug_state hp_state;
enum hotplug_state hp_state; /* hot-plug status */
bool preprogrammed_mode; /* use a pre-programmed VIC or the external mode */
struct clk *hdmi_clk;
struct device *dev;
......@@ -227,7 +227,7 @@ static u8 hdmi_read(struct sh_hdmi *hdmi, u8 reg)
}
/* External video parameter settings */
static void hdmi_external_video_param(struct sh_hdmi *hdmi)
static void sh_hdmi_external_video_param(struct sh_hdmi *hdmi)
{
struct fb_var_screeninfo *var = &hdmi->var;
u16 htotal, hblank, hdelay, vtotal, vblank, vdelay, voffset;
......@@ -259,9 +259,9 @@ static void hdmi_external_video_param(struct sh_hdmi *hdmi)
if (var->sync & FB_SYNC_VERT_HIGH_ACT)
sync |= 8;
pr_debug("H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
htotal, hblank, hdelay, var->hsync_len,
vtotal, vblank, vdelay, var->vsync_len, sync);
dev_dbg(hdmi->dev, "H: %u, %u, %u, %u; V: %u, %u, %u, %u; sync 0x%x\n",
htotal, hblank, hdelay, var->hsync_len,
vtotal, vblank, vdelay, var->vsync_len, sync);
hdmi_write(hdmi, sync | (voffset << 4), HDMI_EXTERNAL_VIDEO_PARAM_SETTINGS);
......@@ -476,9 +476,9 @@ static void sh_hdmi_avi_infoframe_setup(struct sh_hdmi *hdmi)
hdmi_write(hdmi, 0x00, HDMI_CTRL_PKT_BUF_ACCESS_PB1);
/*
* C = No Data
* M = 16:9 Picture Aspect Ratio
* R = Same as picture aspect ratio
* [7:6] C = Colorimetry: no data
* [5:4] M = 2: 16:9, 1: 4:3 Picture Aspect Ratio
* [3:0] R = 8: Active Frame Aspect Ratio: same as picture aspect ratio
*/
hdmi_write(hdmi, 0x28, HDMI_CTRL_PKT_BUF_ACCESS_PB2);
......@@ -619,7 +619,7 @@ static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
u8 edid[128];
/* Read EDID */
pr_debug("Read back EDID code:");
dev_dbg(hdmi->dev, "Read back EDID code:");
for (i = 0; i < 128; i++) {
edid[i] = hdmi_read(hdmi, HDMI_EDID_KSV_FIFO_ACCESS_WINDOW);
#ifdef DEBUG
......@@ -635,10 +635,10 @@ static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
printk(KERN_CONT "\n");
#endif
fb_parse_edid(edid, var);
pr_debug("%u-%u-%u-%u x %u-%u-%u-%u @ %lu kHz monitor detected\n",
var->left_margin, var->xres, var->right_margin, var->hsync_len,
var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
PICOS2KHZ(var->pixclock));
dev_dbg(hdmi->dev, "%u-%u-%u-%u x %u-%u-%u-%u @ %lu kHz monitor detected\n",
var->left_margin, var->xres, var->right_margin, var->hsync_len,
var->upper_margin, var->yres, var->lower_margin, var->vsync_len,
PICOS2KHZ(var->pixclock));
if ((hdmi->var.xres == 720 && hdmi->var.yres == 480) ||
(hdmi->var.xres == 1280 && hdmi->var.yres == 720) ||
......@@ -647,7 +647,7 @@ static void sh_hdmi_read_edid(struct sh_hdmi *hdmi)
else
hdmi->preprogrammed_mode = false;
hdmi_external_video_param(hdmi);
sh_hdmi_external_video_param(hdmi);
}
static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
......@@ -675,8 +675,8 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
hdmi_write(hdmi, 0xFF, HDMI_INTERRUPT_STATUS_2);
if (printk_ratelimit())
pr_debug("IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
irq, status1, mask1, status2, mask2);
dev_dbg(hdmi->dev, "IRQ #%d: Status #1: 0x%x & 0x%x, #2: 0x%x & 0x%x\n",
irq, status1, mask1, status2, mask2);
if (!((status1 & mask1) | (status2 & mask2))) {
return IRQ_NONE;
......@@ -687,7 +687,7 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
udelay(500);
msens = hdmi_read(hdmi, HDMI_HOT_PLUG_MSENS_STATUS);
pr_debug("MSENS 0x%x\n", msens);
dev_dbg(hdmi->dev, "MSENS 0x%x\n", msens);
/* Check, if hot plug & MSENS pin status are both high */
if ((msens & 0xC0) == 0xC0) {
/* Display plug in */
......@@ -724,7 +724,7 @@ static irqreturn_t sh_hdmi_hotplug(int irq, void *dev_id)
}
/* locking: called with info->lock held, or before register_framebuffer() */
static void hdmi_display_on(void *arg, struct fb_info *info)
static void sh_hdmi_display_on(void *arg, struct fb_info *info)
{
/*
* info is guaranteed to be valid, when we are called, because our
......@@ -734,16 +734,23 @@ static void hdmi_display_on(void *arg, struct fb_info *info)
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
struct sh_mobile_lcdc_chan *ch = info->par;
pr_debug("%s(%p): state %x\n", __func__, pdata->lcd_dev, info->state);
dev_dbg(hdmi->dev, "%s(%p): state %x\n", __func__,
pdata->lcd_dev, info->state);
/* No need to lock */
hdmi->info = info;
/*
* hp_state can be set to
* HDMI_HOTPLUG_DISCONNECTED: on monitor unplug
* HDMI_HOTPLUG_CONNECTED: on monitor plug-in
* HDMI_HOTPLUG_EDID_DONE: on EDID read completion
*/
switch (hdmi->hp_state) {
case HDMI_HOTPLUG_EDID_DONE:
/* PS mode d->e. All functions are active */
hdmi_write(hdmi, 0x80, HDMI_SYSTEM_CTRL);
pr_debug("HDMI running\n");
dev_dbg(hdmi->dev, "HDMI running\n");
break;
case HDMI_HOTPLUG_DISCONNECTED:
info->state = FBINFO_STATE_SUSPENDED;
......@@ -753,25 +760,25 @@ static void hdmi_display_on(void *arg, struct fb_info *info)
}
/* locking: called with info->lock held */
static void hdmi_display_off(void *arg)
static void sh_hdmi_display_off(void *arg)
{
struct sh_hdmi *hdmi = arg;
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
pr_debug("%s(%p)\n", __func__, pdata->lcd_dev);
dev_dbg(hdmi->dev, "%s(%p)\n", __func__, pdata->lcd_dev);
/* PS mode e->a */
hdmi_write(hdmi, 0x10, HDMI_SYSTEM_CTRL);
}
/* Hotplug interrupt occurred, read EDID */
static void edid_work_fn(struct work_struct *work)
static void sh_hdmi_edid_work_fn(struct work_struct *work)
{
struct sh_hdmi *hdmi = container_of(work, struct sh_hdmi, edid_work.work);
struct sh_mobile_hdmi_info *pdata = hdmi->dev->platform_data;
struct sh_mobile_lcdc_chan *ch;
pr_debug("%s(%p): begin, hotplug status %d\n", __func__,
pdata->lcd_dev, hdmi->hp_state);
dev_dbg(hdmi->dev, "%s(%p): begin, hotplug status %d\n", __func__,
pdata->lcd_dev, hdmi->hp_state);
if (!pdata->lcd_dev)
return;
......@@ -800,7 +807,7 @@ static void edid_work_fn(struct work_struct *work)
fb_set_suspend(hdmi->info, 0);
} else {
if (lock_fb_info(hdmi->info)) {
hdmi_display_on(hdmi, hdmi->info);
sh_hdmi_display_on(hdmi, hdmi->info);
unlock_fb_info(hdmi->info);
}
}
......@@ -822,7 +829,7 @@ static void edid_work_fn(struct work_struct *work)
out:
mutex_unlock(&hdmi->mutex);
pr_debug("%s(%p): end\n", __func__, pdata->lcd_dev);
dev_dbg(hdmi->dev, "%s(%p): end\n", __func__, pdata->lcd_dev);
}
static int sh_hdmi_notify(struct notifier_block *nb,
......@@ -846,18 +853,19 @@ static int sh_hdmi_notify(struct notifier_block *nb,
switch(action) {
case FB_EVENT_FB_REGISTERED:
/* Unneeded, activation taken care by hdmi_display_on() */
/* Unneeded, activation taken care by sh_hdmi_display_on() */
break;
case FB_EVENT_FB_UNREGISTERED:
/*
* We are called from unregister_framebuffer() with the
* info->lock held. This is bad for us, because we can race with
* the scheduled work, which has to call fb_set_suspend(), which
* takes info->lock internally, so, edid_work_fn() cannot take
* and hold info->lock for the whole function duration. Using an
* additional lock creates a classical AB-BA lock up. Therefore,
* we have to release the info->lock temporarily, synchronise
* with the work queue and re-acquire the info->lock.
* takes info->lock internally, so, sh_hdmi_edid_work_fn()
* cannot take and hold info->lock for the whole function
* duration. Using an additional lock creates a classical AB-BA
* lock up. Therefore, we have to release the info->lock
* temporarily, synchronise with the work queue and re-acquire
* the info->lock.
*/
unlock_fb_info(hdmi->info);
mutex_lock(&hdmi->mutex);
......@@ -913,7 +921,7 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
goto erate;
}
pr_debug("HDMI set frequency %lu\n", rate);
dev_dbg(hdmi->dev, "HDMI set frequency %lu\n", rate);
ret = clk_enable(hdmi->hdmi_clk);
if (ret < 0) {
......@@ -948,10 +956,10 @@ static int __init sh_hdmi_probe(struct platform_device *pdev)
board_cfg = &pdata->lcd_chan->board_cfg;
board_cfg->owner = THIS_MODULE;
board_cfg->board_data = hdmi;
board_cfg->display_on = hdmi_display_on;
board_cfg->display_off = hdmi_display_off;
board_cfg->display_on = sh_hdmi_display_on;
board_cfg->display_off = sh_hdmi_display_off;
INIT_DELAYED_WORK(&hdmi->edid_work, edid_work_fn);
INIT_DELAYED_WORK(&hdmi->edid_work, sh_hdmi_edid_work_fn);
pm_runtime_enable(&pdev->dev);
pm_runtime_resume(&pdev->dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册