Macros to access the register of processors using the new MIPS

Multithreading ASE, also know as MT ASE.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

diff --git a/include/asm-mips/mipsmtregs.h b/include/asm-mips/mipsmtregs.h
new file mode 100644

include/asm-mips/mipsmtregs.h

+/*
+ * MT regs definitions, follows on from mipsregs.h
+ * Copyright (C) 2004 - 2005 MIPS Technologies, Inc.  All rights reserved.
+ * Elizabeth Clarke et. al.
+ *
+ */
+#ifndef _ASM_MIPSMTREGS_H
+#define _ASM_MIPSMTREGS_H
+
+#include <asm/war.h>
+
+#ifndef __ASSEMBLY__
+
+/*
+ * C macros
+ */
+
+#define read_c0_mvpcontrol()		__read_32bit_c0_register($0, 1)
+#define write_c0_mvpcontrol(val)	__write_32bit_c0_register($0, 1, val)
+
+#define read_c0_mvpconf0()		__read_32bit_c0_register($0, 2)
+#define read_c0_mvpconf1()		__read_32bit_c0_register($0, 3)
+
+#define read_c0_vpecontrol()		__read_32bit_c0_register($1, 1)
+#define write_c0_vpecontrol(val)	__write_32bit_c0_register($1, 1, val)
+
+#define read_c0_vpeconf0()		__read_32bit_c0_register($1, 2)
+#define write_c0_vpeconf0(val)		__write_32bit_c0_register($1, 2, val)
+
+#define read_c0_tcstatus()		__read_32bit_c0_register($2, 1)
+#define write_c0_tcstatus(val)		__write_32bit_c0_register($2, 1, val)
+
+#define read_c0_tcbind()		__read_32bit_c0_register($2, 2)
+
+#define read_c0_tccontext()		__read_32bit_c0_register($2, 5)
+#define write_c0_tccontext(val)		__write_32bit_c0_register($2, 5, val)
+
+#else /* Assembly */
+/*
+ * Macros for use in assembly language code
+ */
+
+#define CP0_MVPCONTROL		$0,1
+#define CP0_MVPCONF0		$0,2
+#define CP0_MVPCONF1		$0,3
+#define CP0_VPECONTROL		$1,1
+#define CP0_VPECONF0		$1,2
+#define CP0_VPECONF1		$1,3
+#define CP0_YQMASK		$1,4
+#define CP0_VPESCHEDULE	$1,5
+#define CP0_VPESCHEFBK		$1,6
+#define CP0_TCSTATUS		$2,1
+#define CP0_TCBIND		$2,2
+#define CP0_TCRESTART		$2,3
+#define CP0_TCHALT		$2,4
+#define CP0_TCCONTEXT		$2,5
+#define CP0_TCSCHEDULE		$2,6
+#define CP0_TCSCHEFBK		$2,7
+#define CP0_SRSCONF0		$6,1
+#define CP0_SRSCONF1		$6,2
+#define CP0_SRSCONF2		$6,3
+#define CP0_SRSCONF3		$6,4
+#define CP0_SRSCONF4		$6,5
+
+#endif
+
+/* MVPControl fields */
+#define MVPCONTROL_EVP		(_ULCAST_(1))
+
+#define MVPCONTROL_VPC_SHIFT	1
+#define MVPCONTROL_VPC		(_ULCAST_(1) << MVPCONTROL_VPC_SHIFT)
+
+#define MVPCONTROL_STLB_SHIFT	2
+#define MVPCONTROL_STLB		(_ULCAST_(1) << MVPCONTROL_STLB_SHIFT)
+
+
+/* MVPConf0 fields */
+#define MVPCONF0_PTC_SHIFT	0
+#define MVPCONF0_PTC		( _ULCAST_(0xff))
+#define MVPCONF0_PVPE_SHIFT	10
+#define MVPCONF0_PVPE		( _ULCAST_(0xf) << MVPCONF0_PVPE_SHIFT)
+#define MVPCONF0_TCA_SHIFT	15
+#define MVPCONF0_TCA		( _ULCAST_(1) << MVPCONF0_TCA_SHIFT)
+#define MVPCONF0_PTLBE_SHIFT	16
+#define MVPCONF0_PTLBE		(_ULCAST_(0x3ff) << MVPCONF0_PTLBE_SHIFT)
+#define MVPCONF0_TLBS_SHIFT	29
+#define MVPCONF0_TLBS		(_ULCAST_(1) << MVPCONF0_TLBS_SHIFT)
+#define MVPCONF0_M_SHIFT	31
+#define MVPCONF0_M		(_ULCAST_(0x1) << MVPCONF0_M_SHIFT)
+
+
+/* config3 fields */
+#define CONFIG3_MT_SHIFT	2
+#define CONFIG3_MT		(_ULCAST_(1) << CONFIG3_MT_SHIFT)
+
+
+/* VPEControl fields (per VPE) */
+#define VPECONTROL_TARGTC	(_ULCAST_(0xff))
+
+#define VPECONTROL_TE_SHIFT	15
+#define VPECONTROL_TE		(_ULCAST_(1) << VPECONTROL_TE_SHIFT)
+#define VPECONTROL_EXCPT_SHIFT	16
+#define VPECONTROL_EXCPT	(_ULCAST_(0x7) << VPECONTROL_EXCPT_SHIFT)
+
+/* Thread Exception Codes for EXCPT field */
+#define THREX_TU		0
+#define THREX_TO		1
+#define THREX_IYQ		2
+#define THREX_GSX		3
+#define THREX_YSCH		4
+#define THREX_GSSCH		5
+
+#define VPECONTROL_GSI_SHIFT	20
+#define VPECONTROL_GSI		(_ULCAST_(1) << VPECONTROL_GSI_SHIFT)
+#define VPECONTROL_YSI_SHIFT	21
+#define VPECONTROL_YSI		(_ULCAST_(1) << VPECONTROL_YSI_SHIFT)
+
+/* VPEConf0 fields (per VPE) */
+#define VPECONF0_VPA_SHIFT	0
+#define VPECONF0_VPA		(_ULCAST_(1) << VPECONF0_VPA_SHIFT)
+#define VPECONF0_MVP_SHIFT	1
+#define VPECONF0_MVP		(_ULCAST_(1) << VPECONF0_MVP_SHIFT)
+#define VPECONF0_XTC_SHIFT	21
+#define VPECONF0_XTC		(_ULCAST_(0xff) << VPECONF0_XTC_SHIFT)
+
+/* TCStatus fields (per TC) */
+#define TCSTATUS_TASID		(_ULCAST_(0xff))
+#define TCSTATUS_IXMT_SHIFT	10
+#define TCSTATUS_IXMT		(_ULCAST_(1) << TCSTATUS_IXMT_SHIFT)
+#define TCSTATUS_TKSU_SHIFT	11
+#define TCSTATUS_TKSU		(_ULCAST_(3) << TCSTATUS_TKSU_SHIFT)
+#define TCSTATUS_A_SHIFT	13
+#define TCSTATUS_A		(_ULCAST_(1) << TCSTATUS_A_SHIFT)
+#define TCSTATUS_DA_SHIFT	15
+#define TCSTATUS_DA		(_ULCAST_(1) << TCSTATUS_DA_SHIFT)
+#define TCSTATUS_DT_SHIFT	20
+#define TCSTATUS_DT		(_ULCAST_(1) << TCSTATUS_DT_SHIFT)
+#define TCSTATUS_TDS_SHIFT	21
+#define TCSTATUS_TDS		(_ULCAST_(1) << TCSTATUS_TDS_SHIFT)
+#define TCSTATUS_TSST_SHIFT	22
+#define TCSTATUS_TSST		(_ULCAST_(1) << TCSTATUS_TSST_SHIFT)
+#define TCSTATUS_RNST_SHIFT	23
+#define TCSTATUS_RNST		(_ULCAST_(3) << TCSTATUS_RNST_SHIFT)
+/* Codes for RNST */
+#define TC_RUNNING		0
+#define TC_WAITING		1
+#define TC_YIELDING		2
+#define TC_GATED		3
+
+#define TCSTATUS_TMX_SHIFT	27
+#define TCSTATUS_TMX		(_ULCAST_(1) << TCSTATUS_TMX_SHIFT)
+/* TCStatus TCU bits can use same definitions/offsets as CU bits in Status */
+
+/* TCBind */
+#define TCBIND_CURVPE_SHIFT	0
+#define TCBIND_CURVPE		(_ULCAST_(0xf))
+
+#define TCBIND_CURTC_SHIFT	21
+
+#define TCBIND_CURTC		(_ULCAST_(0xff) << TCBIND_CURTC_SHIFT)
+
+/* TCHalt */
+#define TCHALT_H		(_ULCAST_(1))
+
+#ifndef __ASSEMBLY__
+
+extern void mips_mt_regdump(void);
+
+static inline unsigned int dvpe(void)
+{
+	int res = 0;
+
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+	"	.set	mips32r2					\n"
+	"	move	$1, %0						\n"
+	"	.word	0x41610001		# dvpe $1		\n"
+	"	ehb							\n"
+	"	.set	pop						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+static inline void __raw_evpe(void)
+{
+	__asm__ __volatile__(
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+	"	.set	mips32r2					\n"
+	"	.word	0x41600021		# evpe			\n"
+	"	ehb							\n"
+	"	.set	pop						\n");
+}
+
+/* Enable multiMT if previous suggested it should be.
+   EMT_ENABLE to force */
+
+#define EVPE_ENABLE MVPCONTROL_EVP
+
+static inline void evpe(int previous)
+{
+	if ((previous & MVPCONTROL_EVP))
+		__raw_evpe();
+}
+
+static inline unsigned int dmt(void)
+{
+	int res;
+
+	__asm__ __volatile__(
+	"	.set	noreorder					\n"
+	"	.set	mips32r2					\n"
+	"	dmt	%0						\n"
+	"	ehb							\n"
+	"	.set mips0						\n"
+	"	.set reorder						\n"
+	: "=r" (res));
+
+	instruction_hazard();
+
+	return res;
+}
+
+static inline void __raw_emt(void)
+{
+	__asm__ __volatile__(
+	"	.set	noreorder					\n"
+	"	.set	mips32r2					\n"
+	"	emt							\n"
+	"	ehb							\n"
+	"	.set	mips0						\n"
+	"	.set	reorder");
+}
+
+/* enable multiVPE if previous suggested it should be.
+   EVPE_ENABLE to force */
+
+#define EMT_ENABLE VPECONTROL_TE
+
+static inline void emt(int previous)
+{
+	if ((previous & EMT_ENABLE))
+		__raw_emt();
+}
+
+static inline void ehb(void)
+{
+	__asm__ __volatile__("ehb");
+}
+
+#define mftc0(rt,sel)							\
+({									\
+	 unsigned long  __res;						\
+									\
+	__asm__ __volatile__(						\
+	 "	.set noat\n\t"						\
+	 "	mftc0\t%0," #rt ", " #sel "\n\t"			\
+	 "	.set at\n\t"						\
+	 : "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mftgpr(rt)							\
+({									\
+	unsigned long __res;						\
+									\
+	__asm__ __volatile__(						\
+	"	.set	noat					\n"	\
+	"	mftgpr	%0," #rt "				\n"	\
+	"	.set	at					\n"	\
+	: "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mftr(rt,u,sel)							\
+({									\
+	unsigned long __res;						\
+									\
+	__asm__ __volatile__(						\
+	".set noat\n\t"							\
+	"mftr\t%0, " #rt ", " #u ", " #sel "\n\t"			\
+	".set at\n\t"							\
+	: "=r" (__res));						\
+									\
+	__res;								\
+})
+
+#define mttgpr(rd,v)							\
+({									\
+	__asm__ __volatile__(						\
+	"mttgpr	%0," #rd						\
+	: : "r" (v));							\
+})
+
+#define mttc0(rd,sel,v)							\
+({									\
+	__asm__ __volatile__(						\
+	"mttc0\t %0," #rd ", " #sel					\
+	: : "r" (v));							\
+})
+
+
+#define mttr(rd,u,sel,v)						\
+({									\
+	__asm__ __volatile__(						\
+	"mttr	%0," #rd ", " #u ", " #sel				\
+	: : "r" (v));							\
+})
+
+
+#define settc(tc)							\
+do {									\
+	write_c0_vpecontrol((read_c0_vpecontrol()&~VPECONTROL_TARGTC) | (tc)); \
+	ehb();								\
+} while (0)
+
+
+/* you *must* set the target tc (settc) before trying to use these */
+#define read_vpe_c0_vpecontrol()	mftc0($1, 1)
+#define write_vpe_c0_vpecontrol(val)	mttc0($1, 1, val)
+#define read_vpe_c0_vpeconf0()		mftc0($1, 2)
+#define write_vpe_c0_vpeconf0(val)	mttc0($1, 2, val)
+#define read_vpe_c0_status()		mftc0($12, 0)
+#define write_vpe_c0_status(val)	mttc0($12, 0, val)
+#define read_vpe_c0_cause()		mftc0($13, 0)
+#define write_vpe_c0_cause(val)		mttc0($13, 0, val)
+#define read_vpe_c0_config()		mftc0($16, 0)
+#define write_vpe_c0_config(val)	mttc0($16, 0, val)
+#define read_vpe_c0_config1()		mftc0($16, 1)
+#define write_vpe_c0_config1(val)	mttc0($16, 1, val)
+#define read_vpe_c0_config7()		mftc0($16, 7)
+#define write_vpe_c0_config7(val)	mttc0($16, 7, val)
+#define read_vpe_c0_ebase()		mftc0($15,1)
+#define write_vpe_c0_ebase(val)		mttc0($15, 1, val)
+#define write_vpe_c0_compare(val)	mttc0($11, 0, val)
+
+
+/* TC */
+#define read_tc_c0_tcstatus()		mftc0($2, 1)
+#define write_tc_c0_tcstatus(val)	mttc0($2,1,val)
+#define read_tc_c0_tcbind()		mftc0($2, 2)
+#define write_tc_c0_tcbind(val)		mttc0($2,2,val)
+#define read_tc_c0_tcrestart()		mftc0($2, 3)
+#define write_tc_c0_tcrestart(val)	mttc0($2,3,val)
+#define read_tc_c0_tchalt()		mftc0($2, 4)
+#define write_tc_c0_tchalt(val)		mttc0($2,4,val)
+#define read_tc_c0_tccontext()		mftc0($2, 5)
+#define write_tc_c0_tccontext(val)	mttc0($2,5,val)
+
+/* GPR */
+#define read_tc_gpr_sp()		mftgpr($29)
+#define write_tc_gpr_sp(val)		mttgpr($29, val)
+#define read_tc_gpr_gp()		mftgpr($28)
+#define write_tc_gpr_gp(val)		mttgpr($28, val)
+
+
+#endif /* Not __ASSEMBLY__ */
+
+#endif

include/asm-mips/mipsregs.h

@@ -37,6 +37,8 @@
 #define _ULCAST_ (unsigned long)
 #endif
 
+#include <asm/mipsmtregs.h>
+
 /*
  * Coprocessor 0 register names
  */