提交 69932487 编写于 作者: J Justin P. Mattock 提交者: Jiri Kosina

treewide: remove extra semicolons from various parts of the kernel

This is a resend from the original, changing the title from PATCH to
RFC(since this is a review for commit, and I should have put that the first go around).
and also removing some of the commit's with ia64 and bash since it is significant.
let me know if I might have missed anything etc..
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 ca4a04cf
......@@ -82,7 +82,7 @@ static void nuc93x_timer_setup(void)
timer0_load = (rate / TICKS_PER_SEC);
__raw_writel(timer0_load, REG_TICR0);
val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
val |= (PERIOD | COUNTEN | INTEN | PRESCALE);
__raw_writel(val, REG_TCSR0);
}
......
......@@ -60,7 +60,7 @@ static DEFINE_CLK(emc, 7);
static DEFINE_SUBCLK(rmii, 2);
static DEFINE_CLK(usbd, 8);
static DEFINE_CLK(usbh, 9);
static DEFINE_CLK(g2d, 10);;
static DEFINE_CLK(g2d, 10);
static DEFINE_CLK(pwm, 18);
static DEFINE_CLK(ps2, 24);
static DEFINE_CLK(kpi, 25);
......
......@@ -192,7 +192,7 @@ static ssize_t rbd_snap_add(struct device *dev,
const char *buf,
size_t count);
static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
struct rbd_snap *snap);;
struct rbd_snap *snap);
static struct rbd_device *dev_to_rbd(struct device *dev)
......
......@@ -48,7 +48,7 @@ static void radeon_fence_write(struct radeon_device *rdev, u32 seq)
scratch_index = R600_WB_EVENT_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
else
scratch_index = RADEON_WB_SCRATCH_OFFSET + rdev->fence_drv.scratch_reg - rdev->scratch.reg_base;
rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);;
rdev->wb.wb[scratch_index/4] = cpu_to_le32(seq);
} else
WREG32(rdev->fence_drv.scratch_reg, seq);
}
......
......@@ -390,7 +390,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
int tx_limit, rx_limit;
u32 addr = msgs[dev->msg_write_idx].addr;
u32 buf_len = dev->tx_buf_len;
u8 *buf = dev->tx_buf;;
u8 *buf = dev->tx_buf;
intr_mask = DW_IC_INTR_DEFAULT_MASK;
......
......@@ -403,7 +403,7 @@ static int fm_v4l2_vidioc_s_hw_freq_seek(struct file *file, void *priv,
static int fm_v4l2_vidioc_g_modulator(struct file *file, void *priv,
struct v4l2_modulator *mod)
{
struct fmdev *fmdev = video_drvdata(file);;
struct fmdev *fmdev = video_drvdata(file);
if (mod->index != 0)
return -EINVAL;
......
......@@ -695,7 +695,7 @@ enum sci_status sci_phy_event_handler(struct isci_phy *iphy, u32 event_code)
__func__,
event_code);
return SCI_FAILURE;;
return SCI_FAILURE;
}
return SCI_SUCCESS;
case SCI_PHY_SUB_AWAIT_SATA_SPEED_EN:
......
......@@ -109,7 +109,7 @@ static int __devinit adt7316_i2c_probe(struct i2c_client *client,
static int __devexit adt7316_i2c_remove(struct i2c_client *client)
{
return adt7316_remove(&client->dev);;
return adt7316_remove(&client->dev);
}
static const struct i2c_device_id adt7316_i2c_id[] = {
......
......@@ -52,7 +52,7 @@ static int ad9832_write_frequency(struct ad9832_state *st,
((addr - 3) << ADD_SHIFT) |
((regval >> 0) & 0xFF));
return spi_sync(st->spi, &st->freq_msg);;
return spi_sync(st->spi, &st->freq_msg);
}
static int ad9832_write_phase(struct ad9832_state *st,
......
......@@ -335,7 +335,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
} else {
/* Write dQH next pointer and terminate bit to 0 */
dqh->next_dtd_ptr = req->head->td_dma
& EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
dqh->size_ioc_int_sts = 0;
/* Ensure that updates to the QH will occur before priming. */
......@@ -376,7 +376,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
}
}
done:
return retval;;
return retval;
}
static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
......
......@@ -2931,11 +2931,11 @@ sub process {
}
}
if ($level == 0 && $block =~ /^\s*\{/ && !$allowed) {
my $herectx = $here . "\n";;
my $herectx = $here . "\n";
my $cnt = statement_rawlines($block);
for (my $n = 0; $n < $cnt; $n++) {
$herectx .= raw_line($linenr, $n) . "\n";;
$herectx .= raw_line($linenr, $n) . "\n";
}
WARN("BRACES",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册