提交 69832578 编写于 作者: M Mauro Carvalho Chehab

[media] drx-j: properly handle bit counts on stats

Instead of just assuming that the min resolution is 1E-6,
pass both bit error and bit counts for userspace to calculate
BER. The same applies for PER, for 8VSB. It is not clear how
to get the packet count for QAM. So, for now, don't expose PER
for QAM.
Signed-off-by: NMauro Carvalho Chehab <m.chehab@samsung.com>
上级 03fdfbfd
......@@ -6199,7 +6199,8 @@ static int set_vsb(struct drx_demod_instance *demod)
* \brief Get the values of packet error in 8VSB mode
* \return Error code
*/
static int get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr, u16 *pck_errs)
static int get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr,
u16 *pck_errs, u16 *pck_count)
{
int rc;
u16 data = 0;
......@@ -6224,9 +6225,8 @@ static int get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr, u16 *pck_er
pr_err("error: period and/or prescale is zero!\n");
return -EIO;
}
*pck_errs =
(u16) frac_times1e6(packet_errors_mant * (1 << packet_errors_exp),
(period * prescale * 77));
*pck_errs = packet_errors_mant * (1 << packet_errors_exp);
*pck_count = period * prescale * 77;
return 0;
rw_error:
......@@ -6238,7 +6238,8 @@ static int get_vsb_post_rs_pck_err(struct i2c_device_addr *dev_addr, u16 *pck_er
* \brief Get the values of ber in VSB mode
* \return Error code
*/
static int get_vs_bpost_viterbi_ber(struct i2c_device_addr *dev_addr, u32 *ber)
static int get_vs_bpost_viterbi_ber(struct i2c_device_addr *dev_addr,
u32 *ber, u32 *cnt)
{
int rc;
u16 data = 0;
......@@ -6259,19 +6260,17 @@ static int get_vs_bpost_viterbi_ber(struct i2c_device_addr *dev_addr, u32 *ber)
bit_errors_exp = (data & FEC_RS_NR_BIT_ERRORS_EXP__M)
>> FEC_RS_NR_BIT_ERRORS_EXP__B;
*cnt = period * prescale * 207 * ((bit_errors_exp > 2) ? 1 : 8);
if (((bit_errors_mant << bit_errors_exp) >> 3) > 68700)
*ber = 26570;
*ber = (*cnt) * 26570;
else {
if (period * prescale == 0) {
pr_err("error: period and/or prescale is zero!\n");
return -EIO;
}
*ber =
frac_times1e6(bit_errors_mant <<
((bit_errors_exp >
2) ? (bit_errors_exp - 3) : bit_errors_exp),
period * prescale * 207 *
((bit_errors_exp > 2) ? 1 : 8));
*ber = bit_errors_mant << ((bit_errors_exp > 2) ?
(bit_errors_exp - 3) : bit_errors_exp);
}
return 0;
......@@ -6284,7 +6283,8 @@ static int get_vs_bpost_viterbi_ber(struct i2c_device_addr *dev_addr, u32 *ber)
* \brief Get the values of ber in VSB mode
* \return Error code
*/
static int get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr, u32 *ber)
static int get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr,
u32 *ber, u32 *cnt)
{
u16 data = 0;
int rc;
......@@ -6292,15 +6292,12 @@ static int get_vs_bpre_viterbi_ber(struct i2c_device_addr *dev_addr, u32 *ber)
rc = drxj_dap_read_reg16(dev_addr, VSB_TOP_NR_SYM_ERRS__A, &data, 0);
if (rc != 0) {
pr_err("error %d\n", rc);
goto rw_error;
return -EIO;
}
*ber =
frac_times1e6(data,
VSB_TOP_MEASUREMENT_PERIOD * SYMBOLS_PER_SEGMENT);
*ber = data;
*cnt = VSB_TOP_MEASUREMENT_PERIOD * SYMBOLS_PER_SEGMENT;
return 0;
rw_error:
return -EIO;
}
/**
......@@ -9289,7 +9286,8 @@ set_qam_channel(struct drx_demod_instance *demod,
*
*/
static int
get_qamrs_err_count(struct i2c_device_addr *dev_addr, struct drxjrs_errors *rs_errors)
get_qamrs_err_count(struct i2c_device_addr *dev_addr,
struct drxjrs_errors *rs_errors)
{
int rc;
u16 nr_bit_errors = 0,
......@@ -9474,6 +9472,8 @@ ctrl_get_qam_sig_quality(struct drx_demod_instance *demod)
u16 qam_vd_period = 0; /* Viterbi Measurement period */
u32 vd_bit_cnt = 0; /* ViterbiDecoder Bit Count */
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
/* read the physical registers */
/* Get the RS error data */
rc = get_qamrs_err_count(dev_addr, &measuredrs_errors);
......@@ -9554,9 +9554,9 @@ ctrl_get_qam_sig_quality(struct drx_demod_instance *demod)
QAM_VD_NR_SYMBOL_ERRORS_FIXED_MANT__B;
if ((m << e) >> 3 > 549752)
qam_vd_ser = 500000;
qam_vd_ser = 500000 * vd_bit_cnt * ((e > 2) ? 1 : 8) / 8;
else
qam_vd_ser = frac_times1e6(m << ((e > 2) ? (e - 3) : e), vd_bit_cnt * ((e > 2) ? 1 : 8) / 8);
qam_vd_ser = m << ((e > 2) ? (e - 3) : e);
/* --------------------------------------- */
/* pre and post RedSolomon BER Calculation */
......@@ -9578,9 +9578,9 @@ ctrl_get_qam_sig_quality(struct drx_demod_instance *demod)
/*qam_pre_rs_ber = frac_times1e6( ber_cnt, rs_bit_cnt ); */
if (m > (rs_bit_cnt >> (e + 1)) || (rs_bit_cnt >> e) == 0)
qam_pre_rs_ber = 500000;
qam_pre_rs_ber = 500000 * rs_bit_cnt >> e;
else
qam_pre_rs_ber = frac_times1e6(m, rs_bit_cnt >> e);
qam_pre_rs_ber = m;
/* post RS BER = 1000000* (11.17 * FEC_OC_SNC_FAIL_COUNT__A) / */
/* (1504.0 * FEC_OC_SNC_FAIL_PERIOD__A) */
......@@ -9609,16 +9609,16 @@ ctrl_get_qam_sig_quality(struct drx_demod_instance *demod)
p->cnr.stat[0].scale = FE_SCALE_DECIBEL;
p->cnr.stat[0].svalue = ((u16) qam_sl_mer) * 100;
if (ext_attr->standard == DRX_STANDARD_ITU_B)
if (ext_attr->standard == DRX_STANDARD_ITU_B) {
p->pre_bit_error.stat[0].uvalue += qam_vd_ser;
else
p->pre_bit_count.stat[0].uvalue += vd_bit_cnt * ((e > 2) ? 1 : 8) / 8;
} else {
p->pre_bit_error.stat[0].uvalue += qam_pre_rs_ber;
p->pre_bit_count.stat[0].uvalue += rs_bit_cnt >> e;
}
p->post_bit_error.stat[0].uvalue = qam_post_rs_ber;
p->pre_bit_count.stat[0].uvalue += 1000000;
p->post_bit_count.stat[0].uvalue += 1000000;
p->block_error.stat[0].uvalue += pkt_errs;
#ifdef DRXJ_SIGNAL_ACCUM_ERR
......@@ -10661,8 +10661,8 @@ ctrl_sig_quality(struct drx_demod_instance *demod,
struct dtv_frontend_properties *p = &state->frontend.dtv_property_cache;
enum drx_standard standard = ext_attr->standard;
int rc;
u32 ber;
u16 pkt, mer, strength;
u32 ber, cnt;
u16 err, pkt, mer, strength;
rc = get_sig_strength(demod, &strength);
if (rc < 0) {
......@@ -10684,23 +10684,26 @@ ctrl_sig_quality(struct drx_demod_instance *demod,
#endif
if (lock_status != DRXJ_DEMOD_LOCK && lock_status != DRX_LOCKED) {
p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
} else {
rc = get_vsb_post_rs_pck_err(dev_addr, &pkt);
rc = get_vsb_post_rs_pck_err(dev_addr, &err, &pkt);
if (rc != 0) {
pr_err("error %d getting UCB\n", rc);
p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
} else {
p->block_error.stat[0].scale = FE_SCALE_COUNTER;
p->block_error.stat[0].uvalue += pkt;
p->block_error.stat[0].uvalue += err;
p->block_count.stat[0].scale = FE_SCALE_COUNTER;
p->block_count.stat[0].uvalue += pkt;
}
/* PostViterbi is compute in steps of 10^(-6) */
rc = get_vs_bpre_viterbi_ber(dev_addr, &ber);
rc = get_vs_bpre_viterbi_ber(dev_addr, &ber, &cnt);
if (rc != 0) {
pr_err("error %d getting pre-ber\n", rc);
p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
......@@ -10708,10 +10711,10 @@ ctrl_sig_quality(struct drx_demod_instance *demod,
p->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
p->pre_bit_error.stat[0].uvalue += ber;
p->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
p->pre_bit_count.stat[0].uvalue += 1000000;
p->pre_bit_count.stat[0].uvalue += cnt;
}
rc = get_vs_bpost_viterbi_ber(dev_addr, &ber);
rc = get_vs_bpost_viterbi_ber(dev_addr, &ber, &cnt);
if (rc != 0) {
pr_err("error %d getting post-ber\n", rc);
p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
......@@ -10719,7 +10722,7 @@ ctrl_sig_quality(struct drx_demod_instance *demod,
p->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
p->post_bit_error.stat[0].uvalue += ber;
p->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
p->post_bit_count.stat[0].uvalue += 1000000;
p->post_bit_count.stat[0].uvalue += cnt;
}
rc = get_vsbmer(dev_addr, &mer);
if (rc != 0) {
......@@ -11966,7 +11969,15 @@ static int drx39xxj_read_ber(struct dvb_frontend *fe, u32 *ber)
return 0;
}
*ber = p->pre_bit_error.stat[0].uvalue;
if (!p->pre_bit_count.stat[0].uvalue) {
if (!p->pre_bit_error.stat[0].uvalue)
*ber = 0;
else
*ber = 1000000;
} else {
*ber = frac_times1e6(p->pre_bit_error.stat[0].uvalue,
p->pre_bit_count.stat[0].uvalue);
}
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册