提交 6929dc6b 编写于 作者: J Jean-Francois Moine 提交者: Mauro Carvalho Chehab

V4L/DVB (11710): gspca - main: Webcams cannot do both isoc and bulk image transfers.

Let the subdrivers to set the 'image transfer by bulk' flag.
Signed-off-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 0b119b7b
......@@ -168,6 +168,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
cam->cam_mode = fpix_mode;
cam->nmodes = 1;
cam->bulk = 1;
cam->bulk_size = FPIX_MAX_TRANSFER;
INIT_WORK(&dev->work_struct, dostream);
......
......@@ -441,7 +441,7 @@ static void destroy_urbs(struct gspca_dev *gspca_dev)
* look for an input transfer endpoint in an alternate setting
*/
static struct usb_host_endpoint *alt_xfer(struct usb_host_interface *alt,
__u8 xfer)
int xfer)
{
struct usb_host_endpoint *ep;
int i, attr;
......@@ -467,37 +467,28 @@ static struct usb_host_endpoint *get_ep(struct gspca_dev *gspca_dev)
{
struct usb_interface *intf;
struct usb_host_endpoint *ep;
int i, ret;
int xfer, i, ret;
intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
ep = NULL;
xfer = gspca_dev->cam.bulk ? USB_ENDPOINT_XFER_BULK
: USB_ENDPOINT_XFER_ISOC;
i = gspca_dev->alt; /* previous alt setting */
/* try isoc */
while (--i >= 0) {
ep = alt_xfer(&intf->altsetting[i],
USB_ENDPOINT_XFER_ISOC);
ep = alt_xfer(&intf->altsetting[i], xfer);
if (ep)
break;
}
/* if no isoc, try bulk (alt 0 only) */
if (ep == NULL) {
ep = alt_xfer(&intf->altsetting[0],
USB_ENDPOINT_XFER_BULK);
if (ep == NULL) {
err("no transfer endpoint found");
return NULL;
}
i = 0;
gspca_dev->bulk = 1;
err("no transfer endpoint found");
return NULL;
}
PDEBUG(D_STREAM, "use alt %d ep 0x%02x",
i, ep->desc.bEndpointAddress);
if (i > 0) {
ret = usb_set_interface(gspca_dev->dev, gspca_dev->iface, i);
if (ret < 0) {
err("set interface err %d", ret);
err("set alt %d err %d", i, ret);
return NULL;
}
}
......@@ -517,7 +508,7 @@ static int create_urbs(struct gspca_dev *gspca_dev,
/* calculate the packet size and the number of packets */
psize = le16_to_cpu(ep->desc.wMaxPacketSize);
if (!gspca_dev->bulk) { /* isoc */
if (!gspca_dev->cam.bulk) { /* isoc */
/* See paragraph 5.9 / table 5-11 of the usb 2.0 spec. */
psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3));
......@@ -617,7 +608,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
goto out;
/* clear the bulk endpoint */
if (gspca_dev->bulk)
if (gspca_dev->cam.bulk)
usb_clear_halt(gspca_dev->dev,
gspca_dev->urb[0]->pipe);
......@@ -630,7 +621,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
gspca_dev->streaming = 1;
/* some bulk transfers are started by the subdriver */
if (gspca_dev->bulk && gspca_dev->cam.bulk_nurbs == 0)
if (gspca_dev->cam.bulk && gspca_dev->cam.bulk_nurbs == 0)
break;
/* submit the URBs */
......
......@@ -56,6 +56,7 @@ struct cam {
* - cannot be > MAX_NURBS
* - when 0 and bulk_size != 0 means
* 1 URB and submit done by subdriver */
u8 bulk; /* image transfer by 0:isoc / 1:bulk */
u32 input_flags; /* value for ENUM_INPUT status flags */
};
......@@ -168,7 +169,6 @@ struct gspca_dev {
__u8 iface; /* USB interface number */
__u8 alt; /* USB alternate setting */
__u8 nbalt; /* number of USB alternate settings */
u8 bulk; /* image transfer by 0:isoc / 1:bulk */
};
int gspca_dev_probe(struct usb_interface *intf,
......
......@@ -708,8 +708,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
cam->cam_mode = vga_mode;
cam->nmodes = ARRAY_SIZE(vga_mode);
cam->bulk_size = 16384;
cam->bulk_nurbs = 2;
if (sd->sensor == SENSOR_OV772X) {
cam->bulk = 1;
cam->bulk_size = 16384;
cam->bulk_nurbs = 2;
}
return 0;
}
......
......@@ -309,6 +309,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
struct sd *dev = (struct sd *) gspca_dev;
/* We don't use the buffer gspca allocates so make it small. */
cam->bulk = 1;
cam->bulk_size = 64;
INIT_WORK(&dev->work_struct, sq905_dostream);
......
......@@ -206,6 +206,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
cam->nmodes = 1;
/* We don't use the buffer gspca allocates so make it small. */
cam->bulk_size = 32;
cam->bulk = 1;
INIT_WORK(&dev->work_struct, sq905c_dostream);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册