提交 68bb2c3a 编写于 作者: F Franck Bui-Huu 提交者: Dominik Brodowski

cpupower tool: allow to build in a separate directory

This patch allows cpupower tool to generate its output files in a
seperate directory. This is now possible by passing the 'O=<path>' to
the command line.

This can be usefull for a normal user if the kernel source code is
located in a read only location.

This is patch stole some bits of the perf makefile.

[linux@dominikbrodowski.net: fix commit message]
Signed-off-by: NFranck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
上级 38271504
......@@ -19,6 +19,16 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
OUTPUT=./
ifeq ("$(origin O)", "command line")
OUTPUT := $(O)/
endif
ifneq ($(OUTPUT),)
# check that the output directory actually exists
OUTDIR := $(shell cd $(OUTPUT) && /bin/pwd)
$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist))
endif
# --- CONFIGURATION BEGIN ---
......@@ -87,6 +97,7 @@ AR = $(CROSS)ar
STRIP = $(CROSS)strip
RANLIB = $(CROSS)ranlib
HOSTCC = gcc
MKDIR = mkdir
# Now we set up the build system
......@@ -95,7 +106,7 @@ HOSTCC = gcc
# set up PWD so that older versions of make will work with our build.
PWD = $(shell pwd)
GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo po/$$HLANG.gmo; done;}
GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo $(OUTPUT)po/$$HLANG.gmo; done;}
export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS
......@@ -122,15 +133,18 @@ UTIL_OBJS = utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \
utils/cpupower.o utils/cpufreq-info.o utils/cpufreq-set.o \
utils/cpupower-set.o utils/cpupower-info.o utils/cpuidle-info.o
UTIL_SRC := $(UTIL_OBJS:.o=.c)
UTIL_OBJS := $(addprefix $(OUTPUT),$(UTIL_OBJS))
UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \
utils/helpers/bitmask.h \
utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def
UTIL_SRC := $(UTIL_OBJS:.o=.c)
LIB_HEADERS = lib/cpufreq.h lib/sysfs.h
LIB_SRC = lib/cpufreq.c lib/sysfs.c
LIB_OBJS = lib/cpufreq.o lib/sysfs.o
LIB_OBJS := $(addprefix $(OUTPUT),$(LIB_OBJS))
CFLAGS += -pipe
......@@ -168,79 +182,90 @@ endif
# the actual make rules
all: libcpupower cpupower $(COMPILE_NLS) $(COMPILE_BENCH)
all: libcpupower $(OUTPUT)cpupower $(COMPILE_NLS) $(COMPILE_BENCH)
lib/%.o: $(LIB_SRC) $(LIB_HEADERS)
$(OUTPUT)lib/%.o: $(LIB_SRC) $(LIB_HEADERS)
$(ECHO) " CC " $@
$(QUIET) $(CC) $(CFLAGS) -fPIC -o $@ -c lib/$*.c
libcpupower.so.$(LIB_MAJ): $(LIB_OBJS)
$(OUTPUT)libcpupower.so.$(LIB_MAJ): $(LIB_OBJS)
$(ECHO) " LD " $@
$(QUIET) $(CC) -shared $(CFLAGS) $(LDFLAGS) -o $@ \
-Wl,-soname,libcpupower.so.$(LIB_MIN) $(LIB_OBJS)
@ln -sf $@ libcpupower.so
@ln -sf $@ libcpupower.so.$(LIB_MIN)
@ln -sf $(@F) $(OUTPUT)libcpupower.so
@ln -sf $(@F) $(OUTPUT)libcpupower.so.$(LIB_MIN)
libcpupower: libcpupower.so.$(LIB_MAJ)
libcpupower: $(OUTPUT)libcpupower.so.$(LIB_MAJ)
# Let all .o files depend on its .c file and all headers
# Might be worth to put this into utils/Makefile at some point of time
$(UTIL_OBJS): $(UTIL_HEADERS)
.c.o:
$(OUTPUT)%.o: %.c
$(ECHO) " CC " $@
$(QUIET) $(CC) $(CFLAGS) -I./lib -I ./utils -o $@ -c $*.c
cpupower: $(UTIL_OBJS) libcpupower.so.$(LIB_MAJ)
$(OUTPUT)cpupower: $(UTIL_OBJS) $(OUTPUT)libcpupower.so.$(LIB_MAJ)
$(ECHO) " CC " $@
$(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) $(UTIL_OBJS) -lcpupower -lrt -lpci -L. -o $@
$(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) $(UTIL_OBJS) -lcpupower -lrt -lpci -L$(OUTPUT) -o $@
$(QUIET) $(STRIPCMD) $@
po/$(PACKAGE).pot: $(UTIL_SRC)
$(OUTPUT)po/$(PACKAGE).pot: $(UTIL_SRC)
$(ECHO) " GETTEXT " $@
$(QUIET) xgettext --default-domain=$(PACKAGE) --add-comments \
--keyword=_ --keyword=N_ $(UTIL_SRC) -p $(@D) -o $(@F)
po/%.gmo: po/%.po
$(OUTPUT)po/%.gmo: po/%.po
$(ECHO) " MSGFMT " $@
$(QUIET) msgfmt -o $@ po/$*.po
create-gmo: ${GMO_FILES}
update-po: po/$(PACKAGE).pot
update-po: $(OUTPUT)po/$(PACKAGE).pot
$(ECHO) " MSGMRG " $@
$(QUIET) @for HLANG in $(LANGUAGES); do \
echo -n "Updating $$HLANG "; \
if msgmerge po/$$HLANG.po po/$(PACKAGE).pot -o \
po/$$HLANG.new.po; then \
mv -f po/$$HLANG.new.po po/$$HLANG.po; \
if msgmerge po/$$HLANG.po $< -o \
$(OUTPUT)po/$$HLANG.new.po; then \
mv -f $(OUTPUT)po/$$HLANG.new.po $(OUTPUT)po/$$HLANG.po; \
else \
echo "msgmerge for $$HLANG failed!"; \
rm -f po/$$HLANG.new.po; \
rm -f $(OUTPUT)po/$$HLANG.new.po; \
fi; \
done;
compile-bench: libcpupower.so.$(LIB_MAJ)
@V=$(V) confdir=$(confdir) $(MAKE) -C bench
compile-bench: $(OUTPUT)libcpupower.so.$(LIB_MAJ)
@V=$(V) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT)
# we compile into subdirectories. if the target directory is not the
# source directory, they might not exists. So we depend the various
# files onto their directories.
DIRECTORY_DEPS = $(LIB_OBJS) $(UTIL_OBJS) $(GMO_FILES)
$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS)))
# In the second step, we make a rule to actually create these directories
$(sort $(dir $(DIRECTORY_DEPS))):
$(ECHO) " MKDIR " $@
$(QUIET) $(MKDIR) -p $@ 2>/dev/null
clean:
-find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
-find $(OUTPUT) \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
| xargs rm -f
-rm -f cpupower
-rm -f libcpupower.so*
-rm -rf po/*.gmo po/*.pot
$(MAKE) -C bench clean
-rm -f $(OUTPUT)cpupower
-rm -f $(OUTPUT)libcpupower.so*
-rm -rf $(OUTPUT)po/*.{gmo,pot}
$(MAKE) -C bench O=$(OUTPUT) clean
install-lib:
$(INSTALL) -d $(DESTDIR)${libdir}
$(CP) libcpupower.so* $(DESTDIR)${libdir}/
$(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/
$(INSTALL) -d $(DESTDIR)${includedir}
$(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h
install-tools:
$(INSTALL) -d $(DESTDIR)${bindir}
$(INSTALL_PROGRAM) cpupower $(DESTDIR)${bindir}
$(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir}
install-man:
$(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1
......@@ -253,13 +278,13 @@ install-man:
install-gmo:
$(INSTALL) -d $(DESTDIR)${localedir}
for HLANG in $(LANGUAGES); do \
echo '$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \
$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
echo '$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \
$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
done;
install-bench:
@#DESTDIR must be set from outside to survive
@sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench install
@sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT) install
install: all install-lib install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH)
......
LIBS = -L../ -lm -lcpupower
OUTPUT := ./
ifeq ("$(origin O)", "command line")
ifneq ($(O),)
OUTPUT := $(O)/
endif
endif
OBJS = main.o parse.o system.o benchmark.o
LIBS = -L../ -L$(OUTPUT) -lm -lcpupower
OBJS = $(OUTPUT)main.o $(OUTPUT)parse.o $(OUTPUT)system.o $(OUTPUT)benchmark.o
CFLAGS += -D_GNU_SOURCE -I../lib -DDEFAULT_CONFIG_FILE=\"$(confdir)/cpufreq-bench.conf\"
%.o : %.c
$(OUTPUT)%.o : %.c
$(ECHO) " CC " $@
$(QUIET) $(CC) -c $(CFLAGS) $< -o $@
cpufreq-bench: $(OBJS)
$(OUTPUT)cpufreq-bench: $(OBJS)
$(ECHO) " CC " $@
$(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS)
all: cpufreq-bench
all: $(OUTPUT)cpufreq-bench
install:
mkdir -p $(DESTDIR)/$(sbindir)
mkdir -p $(DESTDIR)/$(bindir)
mkdir -p $(DESTDIR)/$(docdir)
mkdir -p $(DESTDIR)/$(confdir)
install -m 755 cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench
install -m 755 $(OUTPUT)cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench
install -m 755 cpufreq-bench_plot.sh $(DESTDIR)/$(bindir)/cpufreq-bench_plot.sh
install -m 644 README-BENCH $(DESTDIR)/$(docdir)/README-BENCH
install -m 755 cpufreq-bench_script.sh $(DESTDIR)/$(docdir)/cpufreq-bench_script.sh
install -m 644 example.cfg $(DESTDIR)/$(confdir)/cpufreq-bench.conf
clean:
rm -f *.o
rm -f cpufreq-bench
rm -f $(OUTPUT)*.o
rm -f $(OUTPUT)cpufreq-bench
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册