提交 687d2bc4 编写于 作者: M Matthew Wilcox 提交者: James Bottomley

[SCSI] gdth: Stop abusing ->done for internal commands

The ->done member was being used to mark commands as being internal.
I decided to put a magic number in ->underflow instead.  I believe this
to be safe as no current user of ->underflow has any of the bottom 9
bits set.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
上级 9ec76fbf
......@@ -692,6 +692,9 @@ static const struct file_operations gdth_fops = {
.release = gdth_close,
};
#define GDTH_MAGIC 0xc2e7c389 /* I got it from /dev/urandom */
#define IS_GDTH_INTERNAL_CMD(scp) (scp->underflow == GDTH_MAGIC)
#include "gdth_proc.h"
#include "gdth_proc.c"
......@@ -715,7 +718,7 @@ static void gdth_scsi_done(struct scsi_cmnd *scp)
{
TRACE2(("gdth_scsi_done()\n"));
if (scp->request)
if (IS_GDTH_INTERNAL_CMD(scp))
complete((struct completion *)scp->request);
}
......@@ -738,7 +741,7 @@ int __gdth_execute(struct scsi_device *sdev, gdth_cmd_str *gdtcmd, char *cmnd,
scp->cmd_len = 12;
memcpy(scp->cmnd, cmnd, 12);
scp->SCp.this_residual = IOCTL_PRI; /* priority */
scp->done = gdth_scsi_done; /* some fn. test this */
scp->underflow = GDTH_MAGIC;
gdth_queuecommand(scp, gdth_scsi_done);
wait_for_completion(&wait);
......@@ -2355,7 +2358,7 @@ static void gdth_putq(int hanum,Scsi_Cmnd *scp,unchar priority)
ha = HADATA(gdth_ctr_tab[hanum]);
spin_lock_irqsave(&ha->smp_lock, flags);
if (scp->done != gdth_scsi_done) {
if (!IS_GDTH_INTERNAL_CMD(scp)) {
scp->SCp.this_residual = (int)priority;
b = virt_ctr ? NUMDATA(scp->device->host)->busnum:scp->device->channel;
t = scp->device->id;
......@@ -2418,7 +2421,7 @@ static void gdth_next(int hanum)
for (nscp = pscp = ha->req_first; nscp; nscp = (Scsi_Cmnd *)nscp->SCp.ptr) {
if (nscp != pscp && nscp != (Scsi_Cmnd *)pscp->SCp.ptr)
pscp = (Scsi_Cmnd *)pscp->SCp.ptr;
if (nscp->done != gdth_scsi_done) {
if (!IS_GDTH_INTERNAL_CMD(nscp)) {
b = virt_ctr ?
NUMDATA(nscp->device->host)->busnum : nscp->device->channel;
t = nscp->device->id;
......@@ -2444,7 +2447,7 @@ static void gdth_next(int hanum)
firsttime = FALSE;
}
if (nscp->done != gdth_scsi_done) {
if (!IS_GDTH_INTERNAL_CMD(nscp)) {
if (nscp->SCp.phase == -1) {
nscp->SCp.phase = CACHESERVICE; /* default: cache svc. */
if (nscp->cmnd[0] == TEST_UNIT_READY) {
......@@ -2507,7 +2510,7 @@ static void gdth_next(int hanum)
else
nscp->scsi_done(nscp);
}
} else if (nscp->done == gdth_scsi_done) {
} else if (IS_GDTH_INTERNAL_CMD(nscp)) {
if (!(cmd_index=gdth_special_cmd(hanum,nscp)))
this_cmd = FALSE;
next_cmd = FALSE;
......@@ -3848,7 +3851,7 @@ static int gdth_sync_event(int hanum,int service,unchar index,Scsi_Cmnd *scp)
scp->sense_buffer[2] = NOT_READY;
scp->result = (DID_OK << 16) | (CHECK_CONDITION << 1);
}
if (scp->done != gdth_scsi_done) {
if (!IS_GDTH_INTERNAL_CMD(scp)) {
ha->dvr.size = sizeof(ha->dvr.eu.sync);
ha->dvr.eu.sync.ionode = hanum;
ha->dvr.eu.sync.service = service;
......@@ -4945,7 +4948,7 @@ static int gdth_queuecommand(Scsi_Cmnd *scp,void (*done)(Scsi_Cmnd *))
#endif
priority = DEFAULT_PRI;
if (scp->done == gdth_scsi_done)
if (IS_GDTH_INTERNAL_CMD(scp))
priority = scp->SCp.this_residual;
else
gdth_update_timeout(hanum, scp, scp->timeout_per_command * 6);
......
......@@ -805,7 +805,7 @@ static void gdth_stop_timeout(int hanum, int busnum, int id)
spin_lock_irqsave(&ha->smp_lock, flags);
for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) {
if (scp->done != gdth_scsi_done) {
if (!IS_GDTH_INTERNAL_CMD(scp)) {
b = virt_ctr ?
NUMDATA(scp->device->host)->busnum : scp->device->channel;
t = scp->device->id;
......@@ -829,7 +829,7 @@ static void gdth_start_timeout(int hanum, int busnum, int id)
spin_lock_irqsave(&ha->smp_lock, flags);
for (scp = ha->req_first; scp; scp = (Scsi_Cmnd *)scp->SCp.ptr) {
if (scp->done != gdth_scsi_done) {
if (!IS_GDTH_INTERNAL_CMD(scp)) {
b = virt_ctr ?
NUMDATA(scp->device->host)->busnum : scp->device->channel;
t = scp->device->id;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册