提交 685143a1 编写于 作者: S Shardar Shariff Md 提交者: Wolfram Sang

i2c: tegra: use readl_poll_timeout after config_load reg programmed

After CONFIG_LOAD register is programmed instead of explicitly waiting
for timeout, use readl_poll_timeout() to check for register value to get
updated or wait till timeout.
Signed-off-by: NShardar Shariff Md <smohammed@nvidia.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
上级 17f80487
......@@ -30,6 +30,7 @@
#include <linux/reset.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/iopoll.h>
#include <asm/unaligned.h>
......@@ -112,6 +113,8 @@
#define I2C_CLKEN_OVERRIDE 0x090
#define I2C_MST_CORE_CLKEN_OVR BIT(0)
#define I2C_CONFIG_LOAD_TIMEOUT 1000000
/*
* msg_end_type: The bus control which need to be send at end of transfer.
* @MSG_END_STOP: Send stop pulse at end of transfer.
......@@ -448,7 +451,6 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
u32 val;
int err;
u32 clk_divisor;
unsigned long timeout = jiffies + HZ;
err = pm_runtime_get_sync(i2c_dev->dev);
if (err < 0) {
......@@ -497,15 +499,18 @@ static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
if (i2c_dev->hw->has_config_load_reg) {
unsigned long reg_offset;
void __iomem *addr;
reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_CONFIG_LOAD);
addr = i2c_dev->base + reg_offset;
i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
while (i2c_readl(i2c_dev, I2C_CONFIG_LOAD) != 0) {
if (time_after(jiffies, timeout)) {
dev_warn(i2c_dev->dev,
"timeout waiting for config load\n");
err = -ETIMEDOUT;
goto err;
}
msleep(1);
err = readl_poll_timeout(addr, val, val == 0, 1000,
I2C_CONFIG_LOAD_TIMEOUT);
if (err) {
dev_warn(i2c_dev->dev,
"timeout waiting for config load\n");
goto err;
}
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册