ACPI: restore CONFIG_ACPI_SLEEP

Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the
new CONFIG_PM_SLEEP option.
Signed-off-by: NLen Brown <len.brown@intel.com>
[ Modified to work with the PM config setup changes. ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/i386/kernel/acpi/Makefile

@@ -2,7 +2,7 @@ obj-$(CONFIG_ACPI)		+= boot.o
 ifneq ($(CONFIG_PCI),)
 obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
 endif
-obj-$(CONFIG_ACPI)		+= sleep.o wakeup.o
+obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y				+= cstate.o processor.o

arch/i386/kernel/setup.c

@@ -422,7 +422,7 @@ void __init setup_bootmem_allocator(void)
 	 */
 	reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
 #endif
-#ifdef CONFIG_ACPI
+#ifdef CONFIG_ACPI_SLEEP
 	/*
 	 * Reserve low memory region for sleep support.
 	 */

arch/x86_64/kernel/acpi/Makefile

 obj-y			:= boot.o
 boot-y			:= ../../../i386/kernel/acpi/boot.o
-obj-y			+= sleep.o wakeup.o
+obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y			+= processor.o

arch/x86_64/kernel/head.S

@@ -120,7 +120,7 @@ ident_complete:
 	addq	%rbp, trampoline_level4_pgt + 0(%rip)
 	addq	%rbp, trampoline_level4_pgt + (511*8)(%rip)
 #endif
-#ifdef CONFIG_ACPI
+#ifdef CONFIG_ACPI_SLEEP
 	addq	%rbp, wakeup_level4_pgt + 0(%rip)
 	addq	%rbp, wakeup_level4_pgt + (511*8)(%rip)
 #endif

arch/x86_64/kernel/setup.c

@@ -333,7 +333,7 @@ void __init setup_arch(char **cmdline_p)
 	reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE);
 #endif
 
-#ifdef CONFIG_ACPI
+#ifdef CONFIG_ACPI_SLEEP
        /*
         * Reserve low memory region for sleep support.
         */

drivers/acpi/Kconfig

@@ -42,6 +42,11 @@ menuconfig ACPI
 
 if ACPI
 
+config ACPI_SLEEP
+	bool
+	depends on PM_SLEEP
+	default y
+
 config ACPI_PROCFS
 	bool "Deprecated /proc/acpi files"
 	depends on PROC_FS

drivers/acpi/sleep/Makefile

 obj-y					:= poweroff.o wakeup.o
-obj-$(CONFIG_PM_SLEEP)			+= main.o
-obj-$(CONFIG_X86)			+= proc.o
+obj-$(CONFIG_ACPI_SLEEP)		+= main.o
+obj-$(CONFIG_ACPI_SLEEP)		+= proc.o
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/sleep/poweroff.c

@@ -18,6 +18,7 @@
 
 int acpi_sleep_prepare(u32 acpi_state)
 {
+#ifdef CONFIG_ACPI_SLEEP
 	/* do we have a wakeup address for S2 and S3? */
 	if (acpi_state == ACPI_STATE_S3) {
 		if (!acpi_wakeup_address) {
@@ -30,6 +31,7 @@ int acpi_sleep_prepare(u32 acpi_state)
 	}
 	ACPI_FLUSH_CPU_CACHE();
 	acpi_enable_wakeup_device_prep(acpi_state);
+#endif
 	acpi_gpe_sleep_prepare(acpi_state);
 	acpi_enter_sleep_state_prep(acpi_state);
 	return 0;

drivers/acpi/sleep/proc.c

@@ -78,7 +78,7 @@ acpi_system_write_sleep(struct file *file,
 }
 #endif				/* CONFIG_ACPI_PROCFS_SLEEP */
 
-#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || !defined(CONFIG_X86)
 /* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
 #else
 #define	HAVE_ACPI_LEGACY_ALARM

drivers/pci/pci-acpi.c

@@ -220,6 +220,7 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
 }
 EXPORT_SYMBOL(pci_osc_control_set);
 
+#ifdef CONFIG_ACPI_SLEEP
 /*
  * _SxD returns the D-state with the highest power
  * (lowest D-state number) supported in the S-state "x".
@@ -267,6 +268,7 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev,
 	}
 	return PCI_POWER_ERROR;
 }
+#endif
 
 static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 {
@@ -340,7 +342,9 @@ static int __init acpi_pci_init(void)
 	ret = register_acpi_bus_type(&acpi_pci_bus);
 	if (ret)
 		return 0;
+#ifdef	CONFIG_ACPI_SLEEP
 	platform_pci_choose_state = acpi_pci_choose_state;
+#endif
 	platform_pci_set_power_state = acpi_pci_set_power_state;
 	return 0;
 }

drivers/pnp/pnpacpi/core.c

@@ -127,6 +127,7 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
 	return ACPI_FAILURE(status) ? -ENODEV : 0;
 }
 
+#ifdef CONFIG_ACPI_SLEEP
 static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
 {
 	return acpi_bus_set_power((acpi_handle) dev->data,
@@ -140,14 +141,17 @@ static int pnpacpi_resume(struct pnp_dev *dev)
 {
 	return acpi_bus_set_power((acpi_handle) dev->data, ACPI_STATE_D0);
 }
+#endif
 
 static struct pnp_protocol pnpacpi_protocol = {
 	.name	 = "Plug and Play ACPI",
 	.get	 = pnpacpi_get_resources,
 	.set	 = pnpacpi_set_resources,
 	.disable = pnpacpi_disable_resources,
+#ifdef CONFIG_ACPI_SLEEP
 	.suspend = pnpacpi_suspend,
 	.resume = pnpacpi_resume,
+#endif
 };
 
 static int __init pnpacpi_add_device(struct acpi_device *device)

include/acpi/acpi_drivers.h

@@ -147,7 +147,7 @@ static inline void unregister_hotplug_dock_device(acpi_handle handle)
 /*--------------------------------------------------------------------------
                                   Suspend/Resume
   -------------------------------------------------------------------------- */
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_ACPI_SLEEP
 extern int acpi_sleep_init(void);
 #else
 static inline int acpi_sleep_init(void) { return 0; }

kernel/sysctl.c

@@ -689,7 +689,7 @@ static ctl_table kern_table[] = {
 		.proc_handler	= &proc_dointvec,
 	},
 #endif
-#if defined(CONFIG_ACPI) && defined(CONFIG_X86)
+#if	defined(CONFIG_ACPI_SLEEP) && defined(CONFIG_X86)
 	{
 		.ctl_name	= KERN_ACPI_VIDEO_FLAGS,
 		.procname	= "acpi_video_flags",