ARM: dts: Add ethernet PHYs to the a bunch of Geminis

These Gemini boards have Ethernet PHY on GPIO bit-banged
MDIO, clearly defined in the corresponding OpenWRT
ethernet patches since ages. Add them in accordance with
the OpenWRT patch so we can use them when we add ethernet
support.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/gemini-nas4220b.dts

@@ -64,6 +64,19 @@
 		};
 	};
 
+	mdio0: ethernet-phy {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
 	soc {
 		flash@30000000 {
 			status = "okay";

arch/arm/boot/dts/gemini-rut1xx.dts

@@ -58,6 +58,19 @@
 		};
 	};
 
+	mdio0: ethernet-phy {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
 	soc {
 		flash@30000000 {
 			status = "okay";

arch/arm/boot/dts/gemini-wbd111.dts

@@ -69,6 +69,19 @@
 		};
 	};
 
+	mdio0: ethernet-phy {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
 	soc {
 		flash@30000000 {
 			status = "okay";

arch/arm/boot/dts/gemini-wbd222.dts

@@ -69,6 +69,24 @@
 		};
 	};
 
+	mdio0: ethernet-phy {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+
+		phy1: ethernet-phy@3 {
+			reg = <3>;
+			device_type = "ethernet-phy";
+		};
+	};
+
 	soc {
 		flash@30000000 {
 			status = "okay";