net/mlx5e: Toggle link only after modifying port parameters

Add a dedicated function to toggle port link. It should be called only
after setting a port register.
Toggle will set port link to down and bring it back up in case that it's
admin status was up.
Signed-off-by: NGal Pressman <galp@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c

@@ -191,7 +191,6 @@ static int mlx5e_dcbnl_ieee_setpfc(struct net_device *dev,
 {
 	struct mlx5e_priv *priv = netdev_priv(dev);
 	struct mlx5_core_dev *mdev = priv->mdev;
-	enum mlx5_port_status ps;
 	u8 curr_pfc_en;
 	int ret;
 
@@ -200,14 +199,8 @@ static int mlx5e_dcbnl_ieee_setpfc(struct net_device *dev,
 	if (pfc->pfc_en == curr_pfc_en)
 		return 0;
 
-	mlx5_query_port_admin_status(mdev, &ps);
-	if (ps == MLX5_PORT_UP)
-		mlx5_set_port_admin_status(mdev, MLX5_PORT_DOWN);
-
 	ret = mlx5_set_port_pfc(mdev, pfc->pfc_en, pfc->pfc_en);
-
-	if (ps == MLX5_PORT_UP)
-		mlx5_set_port_admin_status(mdev, MLX5_PORT_UP);
+	mlx5_toggle_port_link(mdev);
 
 	return ret;
 }

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c

@@ -795,7 +795,6 @@ static int mlx5e_set_settings(struct net_device *netdev,
 	u32 link_modes;
 	u32 speed;
 	u32 eth_proto_cap, eth_proto_admin;
-	enum mlx5_port_status ps;
 	int err;
 
 	speed = ethtool_cmd_speed(cmd);
@@ -829,12 +828,8 @@ static int mlx5e_set_settings(struct net_device *netdev,
 	if (link_modes == eth_proto_admin)
 		goto out;
 
-	mlx5_query_port_admin_status(mdev, &ps);
-	if (ps == MLX5_PORT_UP)
-		mlx5_set_port_admin_status(mdev, MLX5_PORT_DOWN);
 	mlx5_set_port_proto(mdev, link_modes, MLX5_PTYS_EN);
-	if (ps == MLX5_PORT_UP)
-		mlx5_set_port_admin_status(mdev, MLX5_PORT_UP);
+	mlx5_toggle_port_link(mdev);
 
 out:
 	return err;

drivers/net/ethernet/mellanox/mlx5/core/port.c

@@ -222,6 +222,18 @@ int mlx5_set_port_proto(struct mlx5_core_dev *dev, u32 proto_admin,
 }
 EXPORT_SYMBOL_GPL(mlx5_set_port_proto);
 
+/* This function should be used after setting a port register only */
+void mlx5_toggle_port_link(struct mlx5_core_dev *dev)
+{
+	enum mlx5_port_status ps;
+
+	mlx5_query_port_admin_status(dev, &ps);
+	mlx5_set_port_admin_status(dev, MLX5_PORT_DOWN);
+	if (ps == MLX5_PORT_UP)
+		mlx5_set_port_admin_status(dev, MLX5_PORT_UP);
+}
+EXPORT_SYMBOL_GPL(mlx5_toggle_port_link);
+
 int mlx5_set_port_admin_status(struct mlx5_core_dev *dev,
 			       enum mlx5_port_status status)
 {

include/linux/mlx5/port.h

@@ -67,6 +67,7 @@ int mlx5_query_port_proto_oper(struct mlx5_core_dev *dev,
 			       u8 local_port);
 int mlx5_set_port_proto(struct mlx5_core_dev *dev, u32 proto_admin,
 			int proto_mask);
+void mlx5_toggle_port_link(struct mlx5_core_dev *dev);
 int mlx5_set_port_admin_status(struct mlx5_core_dev *dev,
 			       enum mlx5_port_status status);
 int mlx5_query_port_admin_status(struct mlx5_core_dev *dev,