提交 66744500 编写于 作者: J Jeff Kirsher

Intel Wired LAN drivers: Use static const

Based on work by Joe Perches <joe@perches.com>

Using static const to decrease data and overall object size.

CC: Joe Perches <joe@perches.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com>
上级 19a0b67a
......@@ -4892,11 +4892,11 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
} else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
u16 cur_agc_value;
u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
{ IGP01E1000_PHY_AGC_A,
IGP01E1000_PHY_AGC_B,
IGP01E1000_PHY_AGC_C,
IGP01E1000_PHY_AGC_D
static const u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
IGP01E1000_PHY_AGC_A,
IGP01E1000_PHY_AGC_B,
IGP01E1000_PHY_AGC_C,
IGP01E1000_PHY_AGC_D
};
/* Read the AGC registers for all channels */
for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
......@@ -5071,11 +5071,11 @@ static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
{
s32 ret_val;
u16 phy_data, phy_saved_data, speed, duplex, i;
u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
{ IGP01E1000_PHY_AGC_PARAM_A,
IGP01E1000_PHY_AGC_PARAM_B,
IGP01E1000_PHY_AGC_PARAM_C,
IGP01E1000_PHY_AGC_PARAM_D
static const u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
IGP01E1000_PHY_AGC_PARAM_A,
IGP01E1000_PHY_AGC_PARAM_B,
IGP01E1000_PHY_AGC_PARAM_C,
IGP01E1000_PHY_AGC_PARAM_D
};
u16 min_length, max_length;
......
......@@ -352,12 +352,13 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
}
{ /* Flow Control */
struct e1000_opt_list fc_list[] =
{{ E1000_FC_NONE, "Flow Control Disabled" },
{ E1000_FC_RX_PAUSE,"Flow Control Receive Only" },
{ E1000_FC_TX_PAUSE,"Flow Control Transmit Only" },
{ E1000_FC_FULL, "Flow Control Enabled" },
{ E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
static const struct e1000_opt_list fc_list[] = {
{ E1000_FC_NONE, "Flow Control Disabled" },
{ E1000_FC_RX_PAUSE, "Flow Control Receive Only" },
{ E1000_FC_TX_PAUSE, "Flow Control Transmit Only" },
{ E1000_FC_FULL, "Flow Control Enabled" },
{ E1000_FC_DEFAULT, "Flow Control Hardware Default" }
};
opt = (struct e1000_option) {
.type = list_option,
......
......@@ -1840,11 +1840,12 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
u16 phy_data, i, agc_value = 0;
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
{IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
IGP02E1000_PHY_AGC_D};
static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
IGP02E1000_PHY_AGC_D
};
/* Read the AGC registers for all channels */
for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
......
......@@ -1757,11 +1757,12 @@ s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
u16 phy_data, i, agc_value = 0;
u16 cur_agc_index, max_agc_index = 0;
u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
{IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
IGP02E1000_PHY_AGC_D};
static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
IGP02E1000_PHY_AGC_A,
IGP02E1000_PHY_AGC_B,
IGP02E1000_PHY_AGC_C,
IGP02E1000_PHY_AGC_D
};
/* Read the AGC registers for all channels */
for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
......
......@@ -191,9 +191,9 @@ struct ixgb_option {
} r;
struct { /* list_option info */
int nr;
struct ixgb_opt_list {
const struct ixgb_opt_list {
int i;
char *str;
const char *str;
} *p;
} l;
} arg;
......@@ -226,7 +226,7 @@ ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
break;
case list_option: {
int i;
struct ixgb_opt_list *ent;
const struct ixgb_opt_list *ent;
for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
......@@ -322,14 +322,15 @@ ixgb_check_options(struct ixgb_adapter *adapter)
}
{ /* Flow Control */
struct ixgb_opt_list fc_list[] =
{{ ixgb_fc_none, "Flow Control Disabled" },
{ ixgb_fc_rx_pause,"Flow Control Receive Only" },
{ ixgb_fc_tx_pause,"Flow Control Transmit Only" },
{ ixgb_fc_full, "Flow Control Enabled" },
{ ixgb_fc_default, "Flow Control Hardware Default" }};
static const struct ixgb_opt_list fc_list[] = {
{ ixgb_fc_none, "Flow Control Disabled" },
{ ixgb_fc_rx_pause, "Flow Control Receive Only" },
{ ixgb_fc_tx_pause, "Flow Control Transmit Only" },
{ ixgb_fc_full, "Flow Control Enabled" },
{ ixgb_fc_default, "Flow Control Hardware Default" }
};
const struct ixgb_option opt = {
static const struct ixgb_option opt = {
.type = list_option,
.name = "Flow Control",
.err = "reading default settings from EEPROM",
......
......@@ -1157,7 +1157,7 @@ struct ixgbe_reg_test {
#define TABLE64_TEST_HI 6
/* default 82599 register test */
static struct ixgbe_reg_test reg_test_82599[] = {
static const struct ixgbe_reg_test reg_test_82599[] = {
{ IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
{ IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
......@@ -1181,7 +1181,7 @@ static struct ixgbe_reg_test reg_test_82599[] = {
};
/* default 82598 register test */
static struct ixgbe_reg_test reg_test_82598[] = {
static const struct ixgbe_reg_test reg_test_82598[] = {
{ IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
{ IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
{ IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
......@@ -1208,18 +1208,22 @@ static struct ixgbe_reg_test reg_test_82598[] = {
{ 0, 0, 0, 0 }
};
static const u32 register_test_patterns[] = {
0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
};
#define REG_PATTERN_TEST(R, M, W) \
{ \
u32 pat, val, before; \
const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { \
for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \
before = readl(adapter->hw.hw_addr + R); \
writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \
writel((register_test_patterns[pat] & W), \
(adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if (val != (_test[pat] & W & M)) { \
e_err(drv, "pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
R, val, (_test[pat] & W & M)); \
if (val != (register_test_patterns[pat] & W & M)) { \
e_err(drv, "pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
R, val, (register_test_patterns[pat] & W & M)); \
*data = R; \
writel(before, adapter->hw.hw_addr + R); \
return 1; \
......@@ -1246,7 +1250,7 @@ static struct ixgbe_reg_test reg_test_82598[] = {
static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
{
struct ixgbe_reg_test *test;
const struct ixgbe_reg_test *test;
u32 value, before, after;
u32 i, toggle;
......
......@@ -544,7 +544,7 @@ struct ixgbevf_reg_test {
#define TABLE64_TEST_HI 6
/* default VF register test */
static struct ixgbevf_reg_test reg_test_vf[] = {
static const struct ixgbevf_reg_test reg_test_vf[] = {
{ IXGBE_VFRDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
{ IXGBE_VFRDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
{ IXGBE_VFRDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
......@@ -557,19 +557,23 @@ static struct ixgbevf_reg_test reg_test_vf[] = {
{ 0, 0, 0, 0 }
};
static const u32 register_test_patterns[] = {
0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
};
#define REG_PATTERN_TEST(R, M, W) \
{ \
u32 pat, val, before; \
const u32 _test[] = {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; \
for (pat = 0; pat < ARRAY_SIZE(_test); pat++) { \
for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \
before = readl(adapter->hw.hw_addr + R); \
writel((_test[pat] & W), (adapter->hw.hw_addr + R)); \
writel((register_test_patterns[pat] & W), \
(adapter->hw.hw_addr + R)); \
val = readl(adapter->hw.hw_addr + R); \
if (val != (_test[pat] & W & M)) { \
if (val != (register_test_patterns[pat] & W & M)) { \
hw_dbg(&adapter->hw, \
"pattern test reg %04X failed: got " \
"0x%08X expected 0x%08X\n", \
R, val, (_test[pat] & W & M)); \
R, val, (register_test_patterns[pat] & W & M)); \
*data = R; \
writel(before, adapter->hw.hw_addr + R); \
return 1; \
......@@ -596,7 +600,7 @@ static struct ixgbevf_reg_test reg_test_vf[] = {
static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
{
struct ixgbevf_reg_test *test;
const struct ixgbevf_reg_test *test;
u32 i;
test = reg_test_vf;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册