提交 6665e623 编写于 作者: H Helmut Buchsbaum 提交者: David S. Miller

net: phy: spi_ks8995: generalize creation of SPI commands

Prepare creating SPI reads and writes for other switch families.
The KS8995 family uses the straight forward
	<8bit CMD><8bit ADDR>
sequence.
To be able to support KSZ8795 family, which uses
	<3bit CMD><12bit ADDR><1 bit TR>
make the SPI command creation chip variant dependent.
Signed-off-by: NHelmut Buchsbaum <helmut.buchsbaum@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 cd6f288c
......@@ -105,6 +105,8 @@ struct ks8995_chip_params {
int family_id;
int chip_id;
int regs_size;
int addr_width;
int addr_shift;
};
static const struct ks8995_chip_params ks8995_chip[] = {
......@@ -113,12 +115,16 @@ static const struct ks8995_chip_params ks8995_chip[] = {
.family_id = FAMILY_KS8995,
.chip_id = KS8995_CHIP_ID,
.regs_size = KS8995_REGS_SIZE,
.addr_width = 8,
.addr_shift = 0,
},
[ksz8864] = {
.name = "KSZ8864RMN",
.family_id = FAMILY_KS8995,
.chip_id = KSZ8864_CHIP_ID,
.regs_size = KSZ8864_REGS_SIZE,
.addr_width = 8,
.addr_shift = 0,
},
};
......@@ -153,20 +159,44 @@ static inline u8 get_chip_rev(u8 val)
return (val >> ID1_REVISION_S) & ID1_REVISION_M;
}
/* create_spi_cmd - create a chip specific SPI command header
* @ks: pointer to switch instance
* @cmd: SPI command for switch
* @address: register address for command
*
* Different chip families use different bit pattern to address the switches
* registers:
*
* KS8995: 8bit command + 8bit address
* KSZ8795: 3bit command + 12bit address + 1bit TR (?)
*/
static inline __be16 create_spi_cmd(struct ks8995_switch *ks, int cmd,
unsigned address)
{
u16 result = cmd;
/* make room for address (incl. address shift) */
result <<= ks->chip->addr_width + ks->chip->addr_shift;
/* add address */
result |= address << ks->chip->addr_shift;
/* SPI protocol needs big endian */
return cpu_to_be16(result);
}
/* ------------------------------------------------------------------------ */
static int ks8995_read(struct ks8995_switch *ks, char *buf,
unsigned offset, size_t count)
{
u8 cmd[2];
__be16 cmd;
struct spi_transfer t[2];
struct spi_message m;
int err;
cmd = create_spi_cmd(ks, KS8995_CMD_READ, offset);
spi_message_init(&m);
memset(&t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].tx_buf = &cmd;
t[0].len = sizeof(cmd);
spi_message_add_tail(&t[0], &m);
......@@ -174,9 +204,6 @@ static int ks8995_read(struct ks8995_switch *ks, char *buf,
t[1].len = count;
spi_message_add_tail(&t[1], &m);
cmd[0] = KS8995_CMD_READ;
cmd[1] = offset;
mutex_lock(&ks->lock);
err = spi_sync(ks->spi, &m);
mutex_unlock(&ks->lock);
......@@ -184,20 +211,20 @@ static int ks8995_read(struct ks8995_switch *ks, char *buf,
return err ? err : count;
}
static int ks8995_write(struct ks8995_switch *ks, char *buf,
unsigned offset, size_t count)
{
u8 cmd[2];
__be16 cmd;
struct spi_transfer t[2];
struct spi_message m;
int err;
cmd = create_spi_cmd(ks, KS8995_CMD_WRITE, offset);
spi_message_init(&m);
memset(&t, 0, sizeof(t));
t[0].tx_buf = cmd;
t[0].tx_buf = &cmd;
t[0].len = sizeof(cmd);
spi_message_add_tail(&t[0], &m);
......@@ -205,9 +232,6 @@ static int ks8995_write(struct ks8995_switch *ks, char *buf,
t[1].len = count;
spi_message_add_tail(&t[1], &m);
cmd[0] = KS8995_CMD_WRITE;
cmd[1] = offset;
mutex_lock(&ks->lock);
err = spi_sync(ks->spi, &m);
mutex_unlock(&ks->lock);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册