drm/i915/bxt: Implement enable/disable for Display C9 state

v2: Modified as per review comments from Imre
- Mention enabling instead of allowing in the debug trace and
  remove unnecessary comments.

v3:
- Rebase to latest.
- Move DC9-related functions from intel_display.c to intel_runtime_pm.c.

v4: (imre)
- remove DC5 disabling, it's a nop at this point
- squashed in Suketu's "Assert the requirements to enter or exit DC9"
  patch
- remove check for RUNTIME_PM from assert_can_enable_dc9, it's not a
  dependency

Signed-off-by: A.Sunil Kamath <sunil.kamath@intel.com> (v3)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NSagar Kamble <sagar.a.kamble@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -7059,6 +7059,11 @@ enum skl_disp_power_wells {
 #define   BXT_DE_PLL_PLL_ENABLE		(1 << 31)
 #define   BXT_DE_PLL_LOCK		(1 << 30)
 
+/* GEN9 DC */
+#define DC_STATE_EN			0x45504
+#define  DC_STATE_EN_UPTO_DC5		(1<<0)
+#define  DC_STATE_EN_DC9		(1<<3)
+
 /* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
  * since on HSW we can't write to it using I915_WRITE. */
 #define D_COMP_HSW			(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)

drivers/gpu/drm/i915/intel_drv.h

@@ -1117,6 +1117,8 @@ void broxton_uninit_cdclk(struct drm_device *dev);
 void broxton_set_cdclk(struct drm_device *dev, int frequency);
 void broxton_ddi_phy_init(struct drm_device *dev);
 void broxton_ddi_phy_uninit(struct drm_device *dev);
+void bxt_enable_dc9(struct drm_i915_private *dev_priv);
+void bxt_disable_dc9(struct drm_i915_private *dev_priv);
 void intel_dp_get_m_n(struct intel_crtc *crtc,
 		      struct intel_crtc_state *pipe_config);
 void intel_dp_set_m_n(struct intel_crtc *crtc, enum link_m_n_set m_n);

drivers/gpu/drm/i915/intel_runtime_pm.c

@@ -351,6 +351,72 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
 	BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS)) |	\
 	BIT(POWER_DOMAIN_INIT))
 
+static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
+{
+	struct drm_device *dev = dev_priv->dev;
+
+	WARN(!IS_BROXTON(dev), "Platform doesn't support DC9.\n");
+	WARN((I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
+		"DC9 already programmed to be enabled.\n");
+	WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
+		"DC5 still not disabled to enable DC9.\n");
+	WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on.\n");
+	WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n");
+
+	 /*
+	  * TODO: check for the following to verify the conditions to enter DC9
+	  * state are satisfied:
+	  * 1] Check relevant display engine registers to verify if mode set
+	  * disable sequence was followed.
+	  * 2] Check if display uninitialize sequence is initialized.
+	  */
+}
+
+static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
+{
+	WARN(intel_irqs_enabled(dev_priv), "Interrupts not disabled yet.\n");
+	WARN(!(I915_READ(DC_STATE_EN) & DC_STATE_EN_DC9),
+		"DC9 already programmed to be disabled.\n");
+	WARN(I915_READ(DC_STATE_EN) & DC_STATE_EN_UPTO_DC5,
+		"DC5 still not disabled.\n");
+
+	 /*
+	  * TODO: check for the following to verify DC9 state was indeed
+	  * entered before programming to disable it:
+	  * 1] Check relevant display engine registers to verify if mode
+	  *  set disable sequence was followed.
+	  * 2] Check if display uninitialize sequence is initialized.
+	  */
+}
+
+void bxt_enable_dc9(struct drm_i915_private *dev_priv)
+{
+	uint32_t val;
+
+	assert_can_enable_dc9(dev_priv);
+
+	DRM_DEBUG_KMS("Enabling DC9\n");
+
+	val = I915_READ(DC_STATE_EN);
+	val |= DC_STATE_EN_DC9;
+	I915_WRITE(DC_STATE_EN, val);
+	POSTING_READ(DC_STATE_EN);
+}
+
+void bxt_disable_dc9(struct drm_i915_private *dev_priv)
+{
+	uint32_t val;
+
+	assert_can_disable_dc9(dev_priv);
+
+	DRM_DEBUG_KMS("Disabling DC9\n");
+
+	val = I915_READ(DC_STATE_EN);
+	val &= ~DC_STATE_EN_DC9;
+	I915_WRITE(DC_STATE_EN, val);
+	POSTING_READ(DC_STATE_EN);
+}
+
 static void skl_set_power_well(struct drm_i915_private *dev_priv,
 			struct i915_power_well *power_well, bool enable)
 {