igb: fix init on 82575 with MNG enabled

This patch resolves an issue seen on 82575 adapters with managability
pass-thru enabled, which could cause the system to panic.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

drivers/net/igb/e1000_82575.c

@@ -1227,6 +1227,79 @@ static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
 		temp = rd32(E1000_SCVPC);
 }
 
+/**
+ *  igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
+ *  @hw: pointer to the HW structure
+ *
+ *  After rx enable if managability is enabled then there is likely some
+ *  bad data at the start of the fifo and possibly in the DMA fifo.  This
+ *  function clears the fifos and flushes any packets that came in as rx was
+ *  being enabled.
+ **/
+void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
+{
+	u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
+	int i, ms_wait;
+
+	if (hw->mac.type != e1000_82575 ||
+	    !(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
+		return;
+
+	/* Disable all RX queues */
+	for (i = 0; i < 4; i++) {
+		rxdctl[i] = rd32(E1000_RXDCTL(i));
+		wr32(E1000_RXDCTL(i),
+		     rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
+	}
+	/* Poll all queues to verify they have shut down */
+	for (ms_wait = 0; ms_wait < 10; ms_wait++) {
+		msleep(1);
+		rx_enabled = 0;
+		for (i = 0; i < 4; i++)
+			rx_enabled |= rd32(E1000_RXDCTL(i));
+		if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
+			break;
+	}
+
+	if (ms_wait == 10)
+		hw_dbg("Queue disable timed out after 10ms\n");
+
+	/* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
+	 * incoming packets are rejected.  Set enable and wait 2ms so that
+	 * any packet that was coming in as RCTL.EN was set is flushed
+	 */
+	rfctl = rd32(E1000_RFCTL);
+	wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
+
+	rlpml = rd32(E1000_RLPML);
+	wr32(E1000_RLPML, 0);
+
+	rctl = rd32(E1000_RCTL);
+	temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
+	temp_rctl |= E1000_RCTL_LPE;
+
+	wr32(E1000_RCTL, temp_rctl);
+	wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN);
+	wrfl();
+	msleep(2);
+
+	/* Enable RX queues that were previously enabled and restore our
+	 * previous state
+	 */
+	for (i = 0; i < 4; i++)
+		wr32(E1000_RXDCTL(i), rxdctl[i]);
+	wr32(E1000_RCTL, rctl);
+	wrfl();
+
+	wr32(E1000_RLPML, rlpml);
+	wr32(E1000_RFCTL, rfctl);
+
+	/* Flush receive errors generated by workaround */
+	rd32(E1000_ROC);
+	rd32(E1000_RNBC);
+	rd32(E1000_MPC);
+}
+
 static struct e1000_mac_operations e1000_mac_ops_82575 = {
 	.reset_hw             = igb_reset_hw_82575,
 	.init_hw              = igb_init_hw_82575,

drivers/net/igb/e1000_82575.h

@@ -28,6 +28,8 @@
 #ifndef _E1000_82575_H_
 #define _E1000_82575_H_
 
+extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+
 #define E1000_RAR_ENTRIES_82575   16
 
 /* SRRCTL bit definitions */

drivers/net/igb/e1000_defines.h

@@ -340,6 +340,7 @@
 #define E1000_RXCSUM_PCSD      0x00002000   /* packet checksum disabled */
 
 /* Header split receive */
+#define E1000_RFCTL_LEF        0x00040000
 
 /* Collision related configuration parameters */
 #define E1000_COLLISION_THRESHOLD       15

drivers/net/igb/igb_main.c

@@ -630,6 +630,9 @@ static void igb_configure(struct igb_adapter *adapter)
 	igb_configure_tx(adapter);
 	igb_setup_rctl(adapter);
 	igb_configure_rx(adapter);
+
+	igb_rx_fifo_flush_82575(&adapter->hw);
+
 	/* call IGB_DESC_UNUSED which always leaves
 	 * at least 1 descriptor unused to make sure
 	 * next_to_use != next_to_clean */